Alliance Laundry Systems LTU97AN, LTS97A, LTS97AN1500, LTZ97AN, LTS99AN User Manual

...
0 (0)

Frontload

Washers

Models LTS97A*N, LTS97A*N1500,

LTS99A*N, LTS99A*N1180, LTZ97A*N,

LTZ99A*N, LTU97A*N and LTU99A*N

Instructions Operating

© Copyright 2005, Alliance Laundry Systems LLC

 

 

 

www.comlaundry.com

Part No. 801507R1

 

 

 

 

 

 

April 2005

Operating Instructions

SWD606N

WARNING

To reduce the risk of fire, electric shock, serious injury or death to persons, read the IMPORTANT SAFETY INSTRUCTIONS in the Use and Care Guide before operating your washer.

W018E

NOTE: Always follow manufacturer’s care labels.

Determine Proper Cycle

REGULAR Cycle

Use for sturdy items, like play or work clothes, towels, T-shirts, etc. This cycle includes a wash tumble for nine minutes. The cycle has two rinses with an optional third rinse. The final spin starts with a twominute medium spin and finishes with a three-minute high spin. The total cycle time is approximately

29 minutes without the extra rinse.

PERMANENT PRESS Cycle

Use for permanent press items and synthetics. This cycle includes a wash tumble of seven minutes. The cycle has two rinses with an optional third rinse. The final spin starts with a three-minute medium spin and finishes with a two-minute high spin. The total cycle time is approximately 27 minutes without the extra rinse.

DELICATE Cycle

Wash delicate items usually washed by hand on this cycle. The cycle includes a wash tumble of five minutes. The cycle has two rinses with an optional third rinse. The final spin extracts moisture at a low spin for four minutes. The total cycle time is approximately 23 minutes without the extra rinse.

RINSE & SPIN Cycle

Use to quickly rinse items. The rinse is followed by a high spin. The total cycle time is approximately

12 minutes.

SPIN ONLY Cycle

Use to extract water from wet items. This cycle uses the high spin. The total cycle time is approximately 10 minutes.

To Wash Clothes

IMPORTANT: Before using your new washer, make sure the washer cord is plugged into a 120 Volt electrical outlet that has the proper grounding and polarity. Make sure the washer hoses are connected to the hot and cold water

faucets, and that the faucets are turned on. Be sure the drain hose is not kinked and is inserted into a drain. Refer to the INSTALLATION INSTRUCTIONS for details of proper washer installation.

IMPORTANT: Prior to first wash, use an allpurpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside of washtub.

IMPORTANT: Remove all sharp objects from laundry to avoid tears and rips to items during normal machine operation.

1.Get the clothes ready for washing. Empty pockets and cuffs. Sort items into separate loads. Pretreat stains and heavily soiled areas.

D305I

2

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

801507

Alliance Laundry Systems LTU97AN, LTS97A, LTS97AN1500, LTZ97AN, LTS99AN User Manual

2.Measure and add low sudsing detergent, fabric softener, and bleach to the dispenser drawer. Refer to section on Using Your Dispenser Drawer.

SWD725N

IMPORTANT: If using detergents made for topload washers, avoid oversudsing by using only 1/4 cup regular detergent (1/2 of the recommended amount).

3.Load clothes into wash drum. Refer to section on Load Sizes in your Use and Care Guide.

SWD726N

4.Close the loading door tightly. The washer will not operate with the loading door open.

SWD727N

WARNING

To reduce the risk of serious injury, do not bypass the loading door switch by permitting the washer to tumble or spin with the loading door open.

W095

5. Set WASH/RINSE temperatures.

TEMPERATURE

WARM

WARM

WARM

COLD

HOT

COLD

COLD

COLD

FLW1931N

There are four WASH/RINSE temperatures available – Hot Wash/Cold Rinse, Warm Wash/Warm Rinse, Warm Wash/Cold Rinse, and Cold Wash/Cold Rinse.

Refer to the Available Water Temperatures section for the temperature that works best for your garments.

WARNING

Window may be hot in the Hot Wash Cycle.

W326E

6. Select EXTRA RINSE if desired.

W547I

The extra rinse control is useful for detergent sensitive skin. By pressing the EXTRA RINSE to ON, the REGULAR, PERMANENT PRESS, and DELICATE cycles will each provide an additional rinse. If the extra rinse is desired, press the switch to ON. When the extra rinse is not wanted, OFF should be selected.

801507

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

3

7.Select the cycle according to the type of fabric being washed. Use the indicator dot on the knob as a guide.

 

CYCLE SELECTION

 

OFF

SPIN

 

ONLY

REGULAR

RINSE

PERMANENT

& SPIN

PRESS

 

DELICATE

FLW1932N

8.Press and hold the START button for two seconds to start the washer. The DOOR light will come on after a short delay, water fill will begin, and wash drum will begin tumbling.

NOTE: Washer door MUST be closed tightly to start washer.

If items need to be added or removed after a cycle has started, turn the Cycle Selector knob to the OFF position. Wait until the DOOR light goes off (approximately 45 seconds after cycle has been stopped), open door, add or remove items, and start the cycle again.

There is no agitator on this washer. Instead, the clothing gently tumbles through the water. The wash action consists of a period of tumbling in one direction, a brief pause, and then a reverse tumble in the opposite direction. The pauses are part of the tumble action and add to the uniqueness of the washer. They are part of the cycle.

To Change Cycles

If the selected cycle is not the correct cycle for the fabric being washed, you may change the cycle selection at any time until the first wash fill is complete. Once the washer has filled for the first part of the cycle (the wash portion), the current cycle must be aborted and a new cycle must be started.

To change the cycle before the first fill is complete:

Change the cycle selected on the cycle selector switch.

To change the cycle after the first fill is complete and before the first wash is complete:

1.Abort the current cycle by changing the cycle selector switch to the OFF position.

2.Set the WASH/RINSE temperature selector.

3.Set cycle selector.

4.Turn on extra rinse, if desired.

5.Press and hold the START button for two seconds.

To change the cycle after the first wash is complete:

NOTE: This should only be done if the speed of the final extract is incorrect for the fabric being washed. For example, if washing delicate items on the REGULAR cycle, the high speed extract may damage the fabric. Or, if washing towels or jeans on the DELICATE cycle, the lower speed extract would increase drying time.

1.Abort the current cycle by changing the cycle selector switch to the OFF position.

2.Restart the cycle from the beginning. Refer to the

To Wash Clothes section.

To Pump Out Water After Aborting Cycle

Run a SPIN ONLY cycle. This cycle will perform a high speed extract operation that will pump all of the water out of the washer.

DOOR Light

When the washer is started, the DOOR light will come on after a short delay. The light will turn off approximately 45 seconds after the cycle is complete.

WASH Light

This light comes on during the wash part of each cycle.

RINSE Light

This light comes on for the rinse portion of each cycle.

FINAL SPIN Light

This light comes on while the wash load is in the final spin of the cycle.

Out of Balance Load

If at the end of the cycle, the load is dripping wet, the washer has limited the spin speed. This is to prevent damage to the unit if there is a severely unbalanced load.

If this condition occurs, redistribute the load manually and run a RINSE & SPIN cycle.

If the condition persists, consider steps discussed in the Before Washing section of the Use and Care Guide.

4

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

801507

Available Washing Cycles

The cycles of your washer include several different settings. Refer to Table 1 for what can be expected during the cycles that you select.

Regular Cycle

 

Activity

Water Temperatures

 

 

 

Wash

Fill & Tumble (9:00)

Hot, Warm or Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Rinse

Fill & Tumble

Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Extra Rinse (Optional)

Fill & Tumble

Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Final Rinse

Fill & Tumble

Warm or Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Spin

Medium Spin (650 rpm)

 

 

 

 

Final Spin

High Spin (1000 rpm)

 

 

 

 

Fluff

Tumble

 

 

 

 

Permanent Press Cycle

 

Activity

Water Temperatures

 

 

 

Wash

Fill & Tumble (7:00)

Hot, Warm or Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Rinse

Fill & Tumble

Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Extra Rinse (Optional)

Fill & Tumble

Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Final Rinse

Fill & Tumble

Warm or Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Spin

Medium Spin (650 rpm)

 

 

 

 

Final Spin

High Spin (1000 rpm)

 

 

 

 

Fluff

Tumble

 

 

 

 

Table 1 (continued)

801507

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

5

Table 1 (continued)

Delicate Cycle

 

Activity

Water Temperatures

 

 

 

Wash

Fill & Tumble (5:00)

Hot, Warm or Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Rinse

Fill & Tumble

Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Extra Rinse (Optional)

Fill & Tumble

Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Final Rinse

Fill & Tumble

Warm or Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Final Spin

Low Spin (500 rpm)

 

 

 

 

Fluff

Tumble

 

 

 

 

Rinse & Spin Cycle

 

Activity

Water Temperatures

 

 

 

Rinse

Fill & Tumble (2:00)

Warm or Cold

 

 

 

Spin

Pulse Spin

 

 

 

 

Spin

Medium Spin (650 rpm)

 

 

 

 

Final Spin

High Spin (1000 rpm)

 

 

 

 

Fluff

Tumble

 

 

 

 

NOTE: The Rinse setting will give a cold rinse when the optional Extra Rinse is selected.

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

801507

Loading...
+ 12 hidden pages