Loading...
060220-00 Rev. A
June 2007
OmniSwitch
Transceivers Guide
www.alcatel-lucent.com
This user guide contains SFP and XFP transceiver specifications and compatibility information for the OmniSwitch 6800, 6850 and 9000 Series of switches.
The information described in this guide is subject to change without notice.
Copyright © 2007 by Alcatel-Lucent. All rights reserved. This document may not be reproduced in whole or in part without the express written permission of Alcatel-Lucent.
Alcatel-Lucent® and the Alcatel-Lucent logo are registered trademarks of Alcatel-Lucent. Xylan®, OmniSwitch®, OmniStack®, and Alcatel-Lucent OmniVista® are registered trademarks of Alcatel-Lucent.
OmniAccess™, Omni Switch/Router™, PolicyView™, RouterView™, SwitchManager™, VoiceView™, WebView™, X-Cell™, X-Vision™, and the Xylan logo are trademarks of Alcatel-Lucent.
This OmniSwitch product contains components which may be covered by one or more of the following U.S. Patents:
•U.S. Patent No. 6,339,830
•U.S. Patent No. 6,070,243
•U.S. Patent No. 6,061,368
•U.S. Patent No. 5,394,402
•U.S. Patent No. 6,047,024
•U.S. Patent No. 6,314,106
•U.S. Patent No. 6,542,507
•U.S. Patent No. 6,874,090
26801 West Agoura Road
Calabasas, CA 91301
(818) 880-3500 FAX (818) 880-3505 support@ind.alcatel.com
US Customer Support—(800) 995-2696 International Customer Support—(818) 878-4507 Internet—service.esd.alcatel-lucent.com
ii |
OmniSwitch Transceivers Guide June 2007 |
Contents
|
About This Guide ........................................................................................................... |
v |
|
Supported Platforms ........................................................................................................... |
v |
|
Who Should Read this Manual? ........................................................................................ |
vi |
|
When Should I Read this Manual? .................................................................................... |
vi |
|
What is in this Manual? ..................................................................................................... |
vi |
|
What is Not in this Manual? .............................................................................................. |
vi |
|
How is the Information Organized? ................................................................................. |
vii |
|
Documentation Roadmap ................................................................................................. |
vii |
|
Related Documentation ..................................................................................................... |
ix |
|
User Manual CD ............................................................................................................... |
xi |
|
Technical Support ............................................................................................................. |
xi |
Chapter 1 |
Small Form-Factor Pluggables (SFPs) ................................................................... |
1-1 |
|
In This Chapter ................................................................................................................ |
1-1 |
|
SFP MSA Specification .................................................................................................. |
1-2 |
|
Gigabit Ethernet Transceivers ......................................................................................... |
1-3 |
|
Dual-Speed Ethernet Transceivers .................................................................................. |
1-6 |
|
Bi-directional 100 FX Ethernet Transceivers ................................................................. |
1-7 |
|
100 FX Ethernet Transceivers ......................................................................................... |
1-8 |
|
CWDM Gigabit Ethernet Transceivers ......................................................................... |
1-10 |
Chapter 2 |
10-Gigabit Small Form Factor Pluggables (XFPs) .......................................... |
2-11 |
|
In This Chapter .............................................................................................................. |
2-11 |
|
XFP MSA Specification ................................................................................................ |
2-12 |
|
10-Gigabit Ethernet Transceivers ................................................................................. |
2-13 |
Chapter 3 |
SFP Compatibility Matrix ........................................................................................ |
3-15 |
|
OmniSwitch 9000 Series ............................................................................................... |
3-15 |
|
OmniSwitch 6850 Series ............................................................................................... |
3-16 |
|
OmniSwitch 6800 Series ............................................................................................... |
3-17 |
OmniSwitch Transceivers Guide June 2007 |
iii |
|
|
Contents |
|
|
|
|
|
|
Chapter 4 |
XFP Compatibility Matrix |
........................................................................................4-18 |
|
OmniSwitch 9000 Series ............................................................................................... |
4-18 |
|
OmniSwitch 6850 Series ............................................................................................... |
4-18 |
|
OmniSwitch 6800 Series ............................................................................................... |
4-19 |
iv |
OmniSwitch Transceivers Guide June 2007 |
About This Guide
This OmniSwitch Transceivers Guide provides specifications and compatibility information for the supported OmniSwitch SFP and XFP transceivers.
Supported Platforms
This information in this guide applies to the following products:
•OmniSwitch 6800 Series
•OmniSwitch 6850 Series
•OmniSwitch 9000 Series
Unsupported Platforms
The information in this guide does not apply to the following products:
•OmniSwitch (original version with no numeric model name)
•OmniSwitch 6600 Family
•OmniSwitch 7700/7800
•OmniSwitch 8800
•Omni Switch/Router
•OmniStack
•OmniAccess
OmniSwitch Transceivers Guide June 2007 |
page v |
Who Should Read this Manual? |
About This Guide |
|
|
|
|
Who Should Read this Manual?
The audience for this user guide is network administrators and IT support personnel who need to provide network connectivity using SFP or XFP transceivers on an OmniSwitch.
When Should I Read this Manual?
Read this guide as soon as you are ready to integrate your OmniSwitch into your network and you are ready to provide connectivity using the supported transceivers. You should have already stepped through the first login procedures and read the brief software overviews in the OmniSwitch 6800 Family Getting Started Guide, OmniSwitch 6850 Series Getting Started Guide, or OmniSwitch 9000 Series Getting Started Guide.
What is in this Manual?
This guide includes information about the supported OmniSwitch transceivers.
•SFP and XFP specifications
•SFP and XFP compatibility information
What is Not in this Manual?
Procedures for switch management methods, such as CLI, web-based (WebView or OmniVista) or SNMP, are outside the scope of this guide.
For information on WebView and SNMP switch management methods consult the OmniSwitch Switch Management Guide. Information on using WebView and OmniVista can be found in the context-sensitive on-line help available with those network management applications.
This guide is designed to provide transceiver specification and compatibility information only and is not intended as a reference for any CLI commands or configuration information. Refer to the Documentation Roadmap for a list of available user guides.
page vi |
OmniSwitch Transceivers Guide June 2007 |
About This Guide |
How is the Information Organized? |
|
|
|
|
How is the Information Organized?
Chapters in this guide are broken down by transceiver type, SFP or XPF. Additional sub-sections are provided for the various types of SFP transceivers.
Specification Information. Each transceiver has an associated table providing individual specifications for all supported transceivers.
Compatibility Information. A compatibility chart is provided for each transceiver specifying which modules or switch the transceiver is supported on.
Documentation Roadmap
The OmniSwitch user documentation suite was designed to supply you with information at several critical junctures of the configuration process. The following section outlines a roadmap of the manuals that will help you at each stage of the configuration process. Under each stage, we point you to the manual or manuals that will be most helpful to you.
Stage 1: Using the Switch for the First Time
Pertinent Documentation: Getting Started Guide
Release Notes
A hard-copy Getting Started Guide is included with your switch; this guide provides all the information you need to get your switch up and running the first time. It provides information on unpacking the switch, rack mounting the switch, installing NI modules, unlocking access control, setting the switch’s IP address, and setting up a password. It also includes succinct overview information on fundamental aspects of the switch, such as hardware LEDs, the software directory structure, CLI conventions, and web-based management.
At this time you should also familiarize yourself with the Release Notes that accompanied your switch. This document includes important information on feature limitations that are not included in other user guides.
Stage 2: Gaining Familiarity with Basic Switch Functions
Pertinent Documentation: Hardware Users Guide
Switch Management Guide
Transceivers Guide
Once you have your switch up and running, you will want to begin investigating basic aspects of its hardware and software. Information about switch hardware is provided in the Hardware Guide. This guide provide specifications, illustrations, and descriptions of all hardware components, such as chassis, power supplies, Chassis Management Modules (CMMs), Network Interface (NI) modules, and cooling fans. It also includes steps for common procedures, such as removing and installing switch components.
The Switch Management Guide is the primary users guide for the basic software features on a single switch. This guide contains information on the switch directory structure, basic file and directory utilities, switch access security, SNMP, and web-based management. It is recommended that you read this guide before connecting your switch to the network.
OmniSwitch Transceivers Guide June 2007 |
page vii |
Documentation Roadmap |
About This Guide |
|
|
|
|
Stage 3: Integrating the Switch Into a Network
Pertinent Documentation: Network Configuration Guide
Advanced Routing Configuration Guide
When you are ready to connect your switch to the network, you will need to learn how the OmniSwitch implements fundamental software features, such as 802.1Q, VLANs, Spanning Tree, and network routing protocols. The Network Configuration Guide contains overview information, procedures, and examples on how standard networking technologies are configured in the OmniSwitch.
The Advanced Routing Configuration Guide includes configuration information for networks using advanced routing technologies (OSPF and BGP) and multicast routing protocols (DVMRP and PIM-SM).
Anytime
The OmniSwitch CLI Reference Guide contains comprehensive information on all CLI commands supported by the switch. This guide includes syntax, default, usage, example, related CLI command, and CLI-to-MIB variable mapping information for all CLI commands supported by the switch. This guide can be consulted anytime during the configuration process to find detailed and specific information on each CLI command.
page viii |
OmniSwitch Transceivers Guide June 2007 |
About This Guide |
Related Documentation |
|
|
|
|
Related Documentation
The following are the titles and descriptions of all the related OmniSwitch 6800/6850/9000 user manuals:
•OmniSwitch 6800 Family Getting Started Guide
Describes the hardware and software procedures for getting an OmniSwitch 6800 Family switch up and running. Also provides information on fundamental aspects of OmniSwitch software and stacking architecture.
•OmniSwitch 6850 Series Getting Started Guide
Describes the hardware and software procedures for getting an OmniSwitch 6850 Series switch up and running. Also provides information on fundamental aspects of OmniSwitch software and stacking architecture.
•OmniSwitch 6800 Family Hardware Users Guide
Detailed technical specifications and procedures for the OmniSwitch 6800 Family chassis and components. Also includes comprehensive information on assembling and managing stacked configurations.
•OmniSwitch 6850 Series Hardware User Guide
Complete technical specifications and procedures for all OmniSwitch 6850 Series chassis, power supplies, and fans. Also includes comprehensive information on assembling and managing stacked configurations.
•OmniSwitch 9000 Series Getting Started Guide
Describes the hardware and software procedures for getting an OmniSwitch 9000 Series up and running. Also provides information on fundamental aspects of OmniSwitch software architecture.
•OmniSwitch 9000 Series Hardware Users Guide
Complete technical specifications and procedures for all OmniSwitch 9000 Series chassis, power supplies, fans, and Network Interface (NI) modules.
•OmniSwitch CLI Reference Guide
Complete reference to all CLI commands supported on the OmniSwitch 9000 Series. Includes syntax definitions, default values, examples, usage guidelines and CLI-to-MIB variable mappings.
•OmniSwitch 6800/6850/9000 Switch Management Guide
Includes procedures for readying an individual switch for integration into a network. Topics include the software directory architecture, image rollback protections, authenticated switch access, managing switch files, system configuration, using SNMP, and using web management software (WebView).
•OmniSwitch 6800/6850/9000 Network Configuration Guide
Includes network configuration procedures and descriptive information on all the major software features and protocols included in the base software package. Chapters cover Layer 2 information (Ethernet and VLAN configuration), Layer 3 information (routing protocols, such as RIP), security options (authenticated VLANs), Quality of Service (QoS), and link aggregation.
OmniSwitch Transceivers Guide June 2007 |
page ix |
Related Documentation |
About This Guide |
|
|
|
|
•OmniSwitch 6800/6850/9000 Advanced Routing Configuration Guide
Includes network configuration procedures and descriptive information on all the software features and protocols included in the advanced routing software package. Chapters cover multicast routing (DVMRP and PIM-SM), and OSPF.
•OmniSwitch Transceivers Guide
Includes SFP and XFP transceiver specifications and product compatibility information.
•Technical Tips, Field Notices
Includes information published by Alcatel-Lucent’s Customer Support group.
•Release Notes
Includes critical Open Problem Reports, feature exceptions, and other important information on the features supported in the current release and any limitations to their support.
page x |
OmniSwitch Transceivers Guide June 2007 |
Loading...