Alcatel-Lucent F200, F250 DUO, F200 DUO, F200 TRIO, F250, F250 TRIO User Manual

Size:
1.39 Mb
Download

In keeping with our environmental preservation and compliance commitment, we include mini-guidesin our packaging. More complete instructions and online assistance are available on our website:

www.atlinks.com

Ecologic attitude

1.GETTING TO KNOW YOUR PHONE

1.1. Handset Overview (Versatis F200 Only)

1.M

In idle mode: Press to access the main menu

In sub-menumode: Press to confirm the selection During a call: Press to access Intercom/Phonebook/Redial List/Call List

2.C

In main menu mode: Press to go back to idle screen In sub-menumode: Press to go back to previous level

In sub-menumode: Press and hold to go back to idle screen In editing/predialing mode: Press to clear a character/digit In editing/predialing mode: Press and hold to delete all the characters/digits

During a call: Press to mute/unmute the microphone In idle mode: Press to intercom another handset

In ringing: Press to suppress handset ringer

3.+

In idle mode: Press to access the call list

In menu mode: Press to scroll up the menu items

In Phonebook list/Redial list/Call List: Press to scroll up the list

During a call: Press to increase the volume

In ringing: Press to increase the ringer volume

4.-

In idle mode: Press to access the redial list

In menu mode: Press to scroll down the menu items

In Phonebook list/Redial list/Call list: Press to scroll down the list

During a call: Press to decrease the volume

In ringing: Press to decrease the ringer volume

5.O

During a call: Press to end a call and go back to idle screen In menu/editing mode: Press to go back to previous menu In menu/editing mode: Press and hold to go back to idle screen

In idle mode: Press and hold to power off the handset

In idle mode: Press and hold to power on/off the handset

6.R

In idle/predialing mode: Press to insert a flash During a call: Press to dial a flash

7.P

In idle mode: Press to access the phonebook list

8.E

In idle mode: Press to access the redial list

9.ALPHANUMERIC KEYPAD, *,#

*key in idle mode: Press and hold to enable or disable the keypad lock

# key in idle mode: Press and hold to turn on/off the ringer

# key in call list mode: Press to review caller’s number if applicable

0 key in predialing/number editing mode: Press and hold to insert a pause

1, 2, 3 key in idle/off hook mode, press and hold to dial the stored direct memory number

10.T

In idle/predialing mode: Press to make a call

In Redial list/Call List/Phonebook entry: Press to make a call to the selected entry in the list

During ringing: Press to answer a call

1.2. Handset Overview (Versatis F250 only)

1.M

In idle mode: Press to access the main menu

In sub-menumode: Press to confirm the selection During a call: Press to access Intercom/Phonebook/Redial List/Call List

2.C

In main menu mode: Press to go back to idle screen In sub-menumode: Press to go back to previous level

In sub-menumode: Press and hold to go back to idle screen In editing/predialing mode: Press to clear a character/digit In editing/predialing mode: Press and hold to delete all the characters/digits

During a call: Press to mute/unmute the microphone In idle mode: Press to intercom another handset

In ringing: Press to suppress handset ringer

3.+

In idle mode: Press to access the call list

In menu mode: Press to scroll up the menu items

In Phonebook list/Redial list/Call List: Press to scroll up the list

During a call: Press to increase the volume

In ringing: Press to increase the ringer volume

4.-

In idle mode: Press to access the redial list

In menu mode: Press to scroll down the menu items

In Phonebook list/Redial list/Call List: Press to scroll down the list

During a call: Press to decrease the volume

In ringing: Press to decrease the ringer volume

5.O

During a call: Press to end a call and go back to idle screen In menu/editing mode: Press to go back to previous menu In menu/editing mode: Press and hold to go back to idle screen

In idle mode: Press and hold to power off the handset

In idle mode: Press and hold to power on/off the handset

6.R

In idle/predialing mode: Press to insert a flash During a call: Press to dial a flash

7.P

In idle mode: Press to access the phonebook list

8.S

During a call: Press to turn on/off the speakerphone

In Idle mode/Predialing mode/Redial list/Call List/Phonebook entry: Press to make a call with speakerphone

During ringing: Press to answer a call with speakerphone

9.ALPHANUMERIC KEYPAD, *,#

*key in idle mode: Press and hold to enable or disable the keypad lock

# key in idle mode: Press and hold to turn on/off the ringer

# key in call list mode: Press to review caller’s number if applicable

0 key in predialing/number editing mode: Press and hold to insert a pause

1, 2, 3 key in idle/off hook mode, press and hold to dial the

stored direct memory number

10.T

In idle/predialing mode: Press to make a call

In Redial list/Call List/Phonebook entry: Press to make a call to the selected entry in the list

During ringing: Press to answer a call

1.3. Base Station Overview

3.

INSTALLING YOUR PHONE

 

 

3.1. Installing and Charging the Batteries

 

 

111

Slide down to open the battery compartment cover.

 

 

222

Place the 2 supplied AAA rechargeable batteries as indicated.

 

 

 

Pay extra attention to direction of polarity.

 

 

333

Slide the battery compartment cover back.

 

 

444

Put the handset on the base and charge for 15 hours before

 

 

 

using the handset for the first time. The handset will give a

 

 

 

beep when it is properly placed on the base or charger.

 

 

Notes:

 

 

111

Use only the supplied NiMH rechargeable batteries.

 

 

222

If the handset will not be used for a long time, disconnect and

 

 

 

remove the batteries to prevent possible leakage.

1.

A

 

 

 

Press A on the base station to page your handset. It will

 

 

 

ring for approximately 60 seconds.

 

 

 

Press and hold A on the base station for about five seconds,

 

 

 

the base station is entered into registration mode and allows

 

 

2.

handset registration.

 

 

, @

 

 

 

Steadily on while the handset is charging or in use. (Applicable

 

 

 

only when the LED I/O switch is slid to “I”)

 

 

 

Flash when receiving an incoming call. (Applicable only when

 

 

 

the LED I/O switch is slid to “I”)

 

 

3. LED I/O SWITCH (Bottom of the Base)

3.2. Connecting the Base Station

 

Slide the switch to "O" position to turn off the base LED

 

Slide the switch to "I" position to turn on the base LED when

111

Plug one end of the telephone line cord into the telephone

 

the handset is charging on the base or in use

 

jack on base bottom.

 

 

222

Plug the small end of power adapter into a power jack on

 

 

 

base bottom.

 

 

333

Connect the power supply plug to the base jack

 

 

 

horizontally, and route the power supply cord through

 

 

 

the slot.

 

 

444

Plug the large end of power adapter into a wall power outlet.

1.4. Display Icons and Symbols

The LCD display gives you information on the current status of the telephone.

h Steadily on when the handset is in range of the base. Flash when out of range of the base or not registered to the base.

 

Steadily on when an intercom is in progress.

j Flash when there is an incoming internal call.

k

Indicate a call is in progress.

l

(Versatis F250 only)

Indicate that handsfree is being used.

x Steadily on when an alarm is set.

Flash when the alarm time set before reaches. aIndicate that the keypad is locked.

gIndicate when there are received new Voice Message Waiting (VMWI) not yet read.

Disappear when all the voice messages have been read. (Network service dependent)

n Indicate that the ringer is switched off.

b

Indicate when the battery is fully charged.

Whole icon flashes when the battery performs initial

 

charging.

 

Internal block icon flashes when the battery is in final

 

charging stage.

v

Indicate when the battery needs charging.

Flash when low battery power level is detected.

[

Indicate when more characters are existed before the text

currently displayed.

]

Indicate when more characters are existed after the text

currently displayed.

s

Indicate when new call is received.

 

Turn off when new call has been read.

f ScrollCall List.up/down the menu items/Phonebook list/Redial list/

2.PRECAUTIONS

The signal quality will depend on the location and environment of the base and handset.

Position your Versatis F200/Versatis F250 away from sources of excessive heat (radiators, direct sunlight, etc.) and protect it from vibrations and dust. Never allow your telephone to come into contact with water or other liquids, or with aerosols. To reduce the risk of interference and optimize reception, take particular care not to install the base in the immediate vicinity of windows, large metal objects, reinforced concrete, televisions, music centres, VCR or DVD players, halogen lamps or heating devices, fluorescent lighting, burglar alarms, microwave ovens, computers, etc.

This telephone requires an electrical power supply in order to function.

To clean your Versatis F200/Versatis F250, use an antistatic cloth lightly moistened with water.

NB: Your Versatis F200/Versatis F250 is a DECT™* standard appliance designed to receive and transmit telephone calls. It is designed for connection to the public telecommunications network.

555Plug the other end of the telephone line cord in to the telephone jack or micro-filter.

666 Always use the cables provided in the box.

If you have broadband service,

a micro-filter(not included) is required.

3.3. Connecting the Charger(s) (for Duo/Trio models)

Plug the power adapter into mains socket.

If you have a Broadband line

If you connect your telephone to a line with a broadband connection, you will need to insert a micro-filterbetween the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems.

In a home with broadband, every telephone must have a microfilter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband microfilters, contact your broadband supplier.

www.atlinks.com

ATLINKS Europe

22 quai Gallieni

92150 SuresnesFrance

© ATLINKS 2011 - Reproduction prohibited.

The Manufacturer reserves the right to modify the specifications of its products in order to make technical improvements or comply with new regulations.

ALCATEL and ATLINKS are registered trademarks.

The Alcatel logo and Alcatel name are trademarks of Alcatel and used under licence by ATLINKS.

F200/F200 Duo/Trio

F250/F250 Duo/Trio

A/W No.: 10000259 Rev.1 (EN)

Printed in China

4. USING YOUR PHONE

4.1. Make a Call

4.1.1. Preparatory Dialing

Enter the phone number and press T orS (Versatis F250 Only) to dial the number. PressC to clear the entry.

4.1.2. Direct Dialing

Press T orS (Versatis F250 Only) to take the line and enter the phone number.

4.1.3. Dial from Direct Memory Keys

In idle or off hook mode, press and hold 1/2/3 to dial the direct memory number. You have to store number to the related key first. See section 7.4 for reference.

4.1.4. Call from the Redial List

Press E (Versatis F200 Only) or- (Versatis F250 Only) to access the redial list and press+/- to select the desired redial number. PressT orS (Versatis F250 Only) to dial out to the selected redial number.

4.2. Handset Speakerphone (Versatis F250 Only)

During a call, you can press S to alternate between handsfree and normal handset use.

5.PRIVATE PHONEBOOK

Your phone can store up to 50 private phonebook entries with names and numbers. Each phonebook entry can have a

maximum of 20 digits for the phone number and 12 characters for the name. You can also select different ringtones for your phonebook entries. Phonebook entries are stored alphabetically by name.

7.2. Set the Ringer Volume

111 Press M and+/- to selectHS SETTINGS. 222 PressM and+/- to selectRING SETUP. 333 PressM and+/- to selectRING VOLUME.

444 Press M and+/- to select the desired ringer volume (a total of 6 ringer volume levels includingVOLUME OFF).

Note: The respective ringer volume will be played during your selection.

If VOLUME OFF is selected,n icon will display. 555 PressM to confirm.

7.3.Adjust Earpiece and Handsfree (Versatis F250 Only) Volume

There are 5 levels (VOLUME 1 toVOLUME 5) to choose from for each of earpiece and handsfree (Versatis F250 Only) volume.

During a call:

Press +/- to select volume1-5.The current setting is shown. When you end the call, the setting will remain at the last selected level.

7.4. Store Direct Memory Access Number

You can store three direct access numbers into digit KEY 1, KEY 2 and KEY 3, which will be convenient for you to dial to these numbers directly.

111 Press M and+/- to selectHS SETTINGS. 222 PressM and+/- to selectDIRECT MEM.

333 Press M and+/- to select any one fromKEY 1,KEY 2

and KEY 3.

444 Press M and then enter the number you would like to store,

or edit the number existed before. 555 Press M to confirm.

Note: Press and hold1,2 or3 to call the stored number.

10. TROUBLESHOOTING

If you have difficulty with your phone, please try the suggestions listed below.

As a general rule, if a problem occurs, remove the batteries from all the handsets in your installation for about 1 minute, then disconnect and reconnect the power supply to the base and reinstall the handset batteries.

Problem

Cause

Solutions

 

 

 

 

 

No dialing

a.

The connection

a.

Check the

tone when

 

cord of the base

 

connections. Unplug

pressing

 

station is not

 

and plug back in the

T key

 

plugged in.

 

mains. Check that the

 

 

 

 

telephone line cord

 

 

 

 

has been plugged into

 

 

 

 

the base station and

 

 

 

 

the phone socket.

 

b. The adapter cord

b. Check the base

 

 

is not plugged in

 

station plug and the

 

 

correctly in the

 

220V plug (remove

 

 

base station.

 

and plug-in).

 

c.

The line is busy, as

c.

Wait until the line is

 

 

another handset is

 

unoccupied.

 

 

used.

 

 

 

d.

Wrong connection

d.

Use the original

 

 

cord.

 

connection cord.

 

 

 

 

 

"OUT OF

a.

Base station out of

a.

Reduce the range.

RANGE" is

 

range.

 

 

displayed.

b.

Base station not

b.

Connect base station

 

 

connected to

 

to mains.

 

 

mains.

 

 

 

 

 

The call

Service not activated

Check your Subscription

does not

or wrong operator.

with network.

work.

 

 

 

 

 

 

 

No display.

Empty battery.

Recharge battery.

 

 

 

 

 

The store where you bought your telephone can also provide you with information and after-salessupport.

5.1. Add a New Phonebook Entry

In idle:

111Press P to access the phonebook. OR

Press M and+/- to selectPHONEBOOK main menu item

and then press M to access the phonebook. 222 PressM to selectADD.

333 Press M to enter the name.

444 Press M to enter the number.

555 Press M and+/- to select the desired ringtone for your

phonebook entry.

666 Press M to store the phonebook entry.

5.2. Call from the Phonebook

In idle:

111Press P to access the phonebook. OR

Press M and+/- to selectPHONEBOOK main menu item

and then press M to access the phonebook.

222Press T orS (Versatis F250 Only) to dial out to the selected phonebook entry.

6. CALLER DISPLAY (NETWORK DEPENDENT)

This feature is available if you have subscribed the Caller Line Identification service with your telephone service provider. Your phone can store up to 20 received calls with date/time information in the Call List. The number will be shown on the LCD when the phone is ringing. If the number matches with one of the entries in your Private Phonebook, the caller’s name stored in the private phonebook will be displayed alternatively with the number. The handset will ring with the melody associated with that phonebook entry.

If the caller number is disabled to send caller information, “WITHHELD” will display.

If the caller number is not provided, “OUT OF AREA” will display. In standby, if three unanswered calls are received, “3 NEW CALLS” will be displayed.

6.1. View the Call List

All received calls are saved in Call List with the latest call putting at the top of the list. When the call list is full, the oldest call will be replaced by a new call. The unanswered call which has not been read is marked with a sat the centre of the bottom line of the display.

111Press + to access the call list. OR

Press M and+/- to selectCALL LIST. 222 Press+/- to select the desired entry.

333 Press # to view the caller’s number if applicable.

6.2. Call from the Call List

In idle:

111Press + to access the call list. OR

Press M and+/- to selectCALL LIST.

222Press T orS (Versatis F250 Only) to dial out to the selected phonebook entry.

7.PHONE SETTINGS

7.1. Set the Ringer Melody for Internal/External Calls

111 Press M and+/- to selectHS SETTINGS. 222 PressM and+/- to selectRING SETUP.

333 Press M and+/- to selectINT RING orEXT RING.

444 Press M and+/- to select the desired ringer melody from the melody list.

Note: The respective ringer melody will be played while browsing the melody list.

555 Press M to confirm.

8.REGISTRATION

Your handset and base station is pre-registered.Up to five handsets can be registered to a single base station.

If for some reason, the handset is not registered to the base station (h flashes even when the handset is near the base station), register your handset according to the following procedure.

111 Press and hold A on the base station for about five seconds,

the base station is entered into registration mode. 222 Press M and+/- to selectREGISTRATION.

333 Press M and you are requested to enter the4-digitsystem PIN (default PIN is 0000).

444 Enter the 4-digitsystem PIN.

555 Press M to confirm.

If the handset registration is successful, you will hear a confirmation tone and the h will stop flashing. The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. If the handset registration is unsuccessful, theh will still flash.

11. SAFETY

In the event of an electrical hazard, the mains adapter acts as 230V power isolating device. It should therefore, as a precaution, be installed close to the appliance and be easily accessible. To disconnect the device from the primary power source, the mains adapter must be removed from the 230V AC/50 Hz socket.

If the mains adapter fails, it must be replaced by an identical model.

If not connected to the mains power or if there is a mains power failure, telephones that use cordless handsets will not work.

You will then be unable to make or receive calls in the event of an emergency.

This is why we recommend that you also keep a conventional telephone – one that doesn’t require a power supply – as a backup.

! Do not use your telephone to notify a gas leak when standing in the vicinity of the leak.

It is recommended that you avoid using this device during electrical storms.

Do not attempt to open the batteries, as they contain chemical substances. In the event of leakage, avoid contact with the skin, eyes, nose and mouth. In the event of contact, rinse the affected part for about twenty minutes with running water and seek urgent medical attention. Clean the product with absorbent paper or a dry cloth and contact your reseller for replacement batteries.

ATLINKS hereby declares that the following models conform to the essential requirements and other applicable provisions of European directive 1999/5/EC.

Versatis F200/Versatis F200 Duo/Trio

Versatis F250/Versatis F250 Duo/Trio

9.TECHNICAL DETAILS

Free Field Range

Up to 300 metres*

Indoor Range

Up to 50 metres*

Handset Battery Life

10 hours talk time**

(average values)

100 hours standby**

Number of Handsets

Up to 5

Intercom Mode

Yes

Three-WayConference

Yes

(1 outside correspondent +

 

2 internal correspondents)

 

Electrical Connection/Base

Base main adaptor:

Mains Adaptor/Charger

Model No.: S004LV0600030

 

Input: 100-240V/50-60Hz/0.15 A

 

Output: 6 V DC/300 mA

 

Charger adaptor:

 

Model No.: S004LV0600030

 

Input: 100-240V/50-60Hz/0.15 A

 

Output: 6 V DC/300 mA

 

Only use the adaptors supplied with

 

the telephone

 

Single-phaseAC, excluding

 

IT installations defined by the

 

EN60950 standard.

 

Caution: The network voltage is

 

classified as a hazard by the criteria

 

of this standard.

Telephone Connection

Appliance designed for

 

connection to a TNV3 class

 

(telecommunications network

 

voltage) analogue telephone line as

 

defined by the EN60950 standard.

Batteries

AAA – 1.2 V – 400 mA

 

Only use the batteries supplied with

 

the telephone.

 

Use any other type of battery

 

presents a risk of explosion.

 

Used batteries must be disposed

 

of in compliance with current

 

environmental protection

 

regulations.

Operating Temperature

From 5°C to 40°C

*Values may vary according to environment.

**Depending on initial battery charge.

12. ENVIRONMENT

This symbol means that your inoperative electronic

appliance must be collected separately and not mixed with the household waste. The European Union has implemented a specific collection and recycling system for which producers are responsible.

This appliance has been designed and manufactured with high quality materials and components that can be recycled and reused. Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to work properly but which can become a health and environmental hazard if they are not handled or disposed of in the proper way. Consequently, please do not throw out your inoperative appliance with the household waste.

If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it with the vendor when buying a new appliance.

-If you are a professional user, please follow your supplier's instructions.

-If the appliance is rented to you or left in your care, please contact your service provider.

Keen to preserve the environment, ATLINKS has equipped this appliance with a switching power supply, offering better energy efficiency. The advantages include not only very low

electricity consumption, but also a more compact format than the conventional power supply units used by the previous range.

The used batteries from your telephone (if it has batteries) must be disposed of in compliance with current environmental protection regulations. Comply with your local regulations. Return your batteries to your reseller or dispose of them at an approved recycling centre.

Help us protect the environment in which we live!