Airpura Industries 600-W User Manual
600-W
Central Air Series
Enjoy the Benefits
of Clean Air in Every Part of Your Home
Simple installation
The Airpura 600-W air purification unit
can be easily installed into your central air system.
The 600-W draws a portion of the main airflow
as a by-pass, purifies it and returns the clean
air into the system.
Airpura's efficient 560 CFM fan motor ensures
that no change in air pressure takes place in
your central air system.
Continuous air purification
Even when your central air system is turned
off the Airpura 600-W will continue to filter and
distribute clean air throughout your home.
The continuous purification of the 600-W's
high efficiency filtration system will clean the air
in your home and eliminate any new pollutants
introduced in the normal course of everyday activities.
With the 600-W's variable speed control, you choose
the level of purification required: from OFF to MAX.
Energy savings
You save on your energy costs and help protect
the environment by cleaning and recirculating your
indoor air instead of heating or cooling outdoor air.
6 Filtration Options
R600-W All purpose filtration
UV600-W Microorganisms
V600-W Specific chemicals - VOCS
C600-W Airborne Chemicals
H600-W Particle Filtration
P600-W Comprehensive Filtration
The Airpura 600-W
Series
Black Baked Powder Coat Finish
The Airpura Limited Warranty
Long Lasting Filters
Carbon filters typically last up to 2
years depending on use
Hepa filters typically last 5 years
in regular use.
Pre-filters should be changed every
12 months depending on use
Feel the Difference Breathing Clean Air Makes to Your Health
Technical
Specifications
600-W
Central Air Series
Advanced design for Maximum Efficiency
Carbon bed
570 sq in surface area
x 2 or 3" deep
True Hepa Filter
40 sq ft true HEPA
(Measured 1 side only)
10 pleats per inch
Pleats warm rolled
with separaters
Air Flow 560 cfm (freeflow)
More cfm than any
other home unit available
Pre-filter
20 sq in x 2 in deep
Unit dimensions
25" x 15"
Inlet and Outlet Ducts
Standard 5'' diameter
Weight
50lbs total
Voltage Options
115 or 220 volts
Watts
120 on high 40 on low
ETL Certified
Conforms to
CSA C22.2 no 113
ANSI / UL 507
One piece motor / fan assembly
Eliminates vibration problems where separate fan is attached to a shaft with
a set screw. Compact motor / fan design allows more space for filtration
Motor and electric parts out of the airflow
Other systems blow clean air over the motor and recontaminate it
Unique pressure seal
The pressure seal system on the filter chamber ensures that all the impurities
pass through the filters. Other systems allow dirty air to escape and fail
to acheive their promised HEPA rating of 99.97% filtration
Powdercoat steel housing
Robust construction. No plastic vapors.
Easy Change Pre-filter Pads
Simply unclip the input pipe
and replace the pre-filter pad
Activated Carbon Filter
Absorbs airborne chemicals
noxious gases and odors
True HEPA filter
Traps 99.97% of particles
as small as 0.3 microns
Felt Gaskets
Seal the filter chamber:
No off gassing from rubber seals
UV600-W and P600-W models
20 watt UV lamp
30,000 um per sec squared Sterilizes mold spores,
micro-organisms antigens and pathogens
Electrical parts chamber
Pressure seals
Your
Airpura
6
Filtration
Options
Dealer
R600-W All Purpose Filtration
18lbs Carbon filter, True Hepa filter
V600-W Specific Chemicals - VOCS
Enhanced Carbon filter, True Hepa filter
H600-W Particle Filtration
True Hepa filter, Hi-C carbon cloth filter,
Lamp situated in filter chamber
Kills organisms as they are trapped by the filters
TitanClean Photo-Catalytic Attachment
in the P600-W
In conjunction with the UV lamp TitanClean breaks
down airborne chemicals and reduces them to
harmless carbon dioxide or water vapor
C600-W Airborne Chemicals
26lbs Carbon filter, HepaBarrier filter
UV600-W Microorganisms
18lbs Carbon filter, True Hepa filter, UV Lamp
P600-W Comprehensive Filtration
18lbs Carbon filter, True Hepa filter, UV Lamp,
TitanClean Photocatalytic Oxidizer
Loading...