MK-2MCD Termination Switch Troubleshooting Chart
MK-2MCD MK-2HCD MK-2HCD CONDITION ON POWER-UP CONDITION PROBLEM EXHIBITED WITH CONFIGURATION
CORRECT
INCORRECT
INCORRECT
INCORRECT
N/A OFF ON
N/A ON OFF
N/A ON ON
N/A OFF OFF
OTHER CONDITIONS OF NOTE:
MORE THAN TWO MK-2HCD's IN SYSTEM
MASTER LED LIGHTS, FOLLOWED BY SUBMASTER LEDS.
LEDS GO OUT AFTER A FEW SECONDS.
MASTER LED LIGHTS, FOLLOWED BY SUBMASTER LEDS.
LEDS GO OUT AFTER A FEW SECONDS.
MASTER LED LIGHTS, FOLLOWED BY SUBMASTER LEDS.
LEDS GO OUT AFTER A FEW SECONDS.
MASTER LED LIGHTS, FOLLOWED BY SUBMASTER LEDS.
AFTER MASTER DETECTION SEQUENCE, MASTER LED BLINKS
RAPIDLY, SUBMASTER LEDS CONSTANT ON.
MASTER LED LIGHTS, FOLLOWED BY SUBMASTER LEDS.
LEDS GO OUT AFTER A FEW SECONDS.
NONE. PROPER CONFIGURATION.
SEEMING PROPER FUNCTION, OCCASIONAL INTERMITTENT
RESET CONDITION CAUSED ON MASTER STATION. MAY BE
AFFECTED BY WIRE DISTANCE BETWEEN STATIONS.
PROPER FUNCTION UNTIL ATTEMPTED COMMUNICATION OF
ANY TYPE. MASTER AND SUBS THEN EMIT LOUD TREMOLO
TONE WHICH CAN ONLY BE CANCELED BY POWER-DOWN.
NO FUNCTION WHATSOEVER. SYSTEM DISABLED.
TOTALLY INTERMITTENT FUNCTION. MASTER MAY
FREQUENTLY REINITIALIZE. TREMOLO TONE MAY ALSO
SOUND UNDER CERTAIN CONDITIONS.