Aeg-electrolux L62850 L Manual

4 (1)

LAVAMAT 62850L

User manual

Washing Machine

2 Contents

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating instructions

3

Safety information

3

General safety

3

Installation

3

Use

4

Child Safety

4

Product description

5

Detergent dispenser drawer

6

Control panel

6

Display

7

Indicator pilot lights (10)

8

Personalization

8

Acoustic signals

8

Child safety lock

8

Daily use

9

Load the laundry

9

Measure out the detergent and the fabric

softener

9

Select the required programme by means of

programme selector dial (1)

10

Select the desired TEMPERATURE (Button 2)

Select the SPIN speed or the RINSE HOLD

10

 

option (Button 3)

11

Programme option buttons

11

Select the STAIN option (Button 4)

11

SENSITIVE option (Button 5)

11

Select the TIME SAVING option (Button 6)

 

11

Select the START/PAUSE (Button 8)

12

Select the DELAY START (Button 9)

12

Select an additional rinse (EXTRA RINSE)

12

 

Altering an option or a running programme

 

13

Interrupting a programme

13

Cancelling a programme

13

Opening the door after the programme has

started

13

 

At the end of the programme

13

 

Helpful hints and tips

14

 

Sorting out the laundry

14

 

Before loading the laundry

14

 

Removing stains

14

 

Detergents and additives

14

 

Quantity of detergent to be used

15

 

Degrees of water hardness

15

 

Washing programmes

15

 

Care and cleaning

18

 

Descaling

18

 

After each wash

18

 

Maintenance wash

18

 

External cleaning

19

 

Detergent dispenser drawer

19

 

Washing drum

19

 

Door seal

20

 

Drain pump

20

 

Cleaning the water inlet filters

21

Emergency emptying out

22

 

Frost precautions

23

 

What to do if…

23

 

Technical data

26

 

Consumption values

27

 

Installation instructions

27

 

Installation

27

 

Unpacking

27

 

Positioning and levelling

30

 

Water inlet

30

 

Water-stop device

31

 

Water drainage

31

 

Electrical connection

32

 

Environment concerns

33

 

 

 

Safety information

3

 

 

 

 

Packaging materials

33

Ecological hints

33

 

 

Subject to change without notice

Operating instructions

Safety information

132957770-172009

Read carefully & keep for future reference.

The safety of Your appliance complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.

You MUST read them carefully before installing or using the appliance.

Before first starting up, check the appliance for any damage incurred during transport. Never connect up a damaged appliance . If parts are damaged, contact your supplier.

If the appliance is delivered in the winter months when there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.

General safety

It is dangerous to alter the specifications or attempt to modify this product in any way.

During high temperature wash programmes the door glass may get hot. Do not touch it!

Make sure that small pets do not climb into the drum. To avoid this, please check into the drum before using.

Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.

Only use the advised quantities of fabric softener and detergent. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.

Do not use your washing machine to wash articles with whalebones, material without hems or torn material.

Always unplug the appliance and turn off the water supply after use, cleaning and maintenance.

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.

Installation

• This appliance is heavy. Care should be taken when moving it.

4Safety information

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.

All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.

After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall.

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance.

Always be sure, that there is no water leakage from hoses and their connections after the installation.

If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter.

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Use

This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.

Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label.

Do not overload the appliance. See the Washing Programme Table.

Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.

Never use the appliance if the power supply cable, the control panel, the working surface or the base are damaged so that the inside of the washing machine is accessible.

Child Safety

This appliance is not intended for use by person (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children's reach.

Keep all detergents in a safe place out of children’s reach.

Aeg-electrolux L62850 L Manual

Product description

5

 

 

Make sure that children or pets do not climb into the drum. To prevent children or pets becoming trapped inside the drum the machine incorporates a special feature. To ac-

tivate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anticlockwise until the groove is vertical.

Product description

Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

The ECO VALVE system allows total use of detergent and reduces water consumption so saving energy.

2

1

3

4

5

6

1Detergent dispenser drawer

2Control panel

3Door opening handle

4Rating plate

6 Control panel

5Drain pump

6Adjustable feet

Detergent dispenser drawer

Compartment for detergent used for prewash . The prewash detergent is added at the beginning of the wash programme.

Compartment for powder or liquid detergent used for main wash .

Compartment for liquid additives (fabric softener, starch).

Compartment for stain remover used for main wash with STAIN-option .

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and the pilot lights. These are presented by relevant numbers on the following pages.

1

 

2

 

3

 

4

 

5

 

6

 

7

 

8

 

9

 

10

1Programme selector dial

2TEMPERATURE button

3SPIN button

4STAIN button

5SENSITIVE button

6TIME SAVING button

Display 7

7DISPLAY

8START/PAUSE button

9DELAY START button

10 Indicator pilot lights Symbols : Rinse Hold, Cold

Display

7.2

7.3

Duration of selected programme (7.1) :

Duration of selected programme : After selecting a programme, the duration is displayed in hours and minutes (for example 2.05 ). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.

Alarm codes

In the event of operating problems, some alarm codes can be displayed, for example (see chapter «What to do if...»).

End of programme

When the programme has finished a blinking zero is displayed, the DOOR pilot light ( 10.2 ), the FUNCTIONING pilot light ( 10.1 ) and the pilot light of button 8 go out and the door can be opened.

Incorrect option selection

If an option which is not compatible with the set wash programme is selected, the message Err is displayed for about 2 seconds and the yellow pilot light of button 8 light starts blinking.

Delay Start (7.2)

The selected delay (20 hours max) set by means of the relevant button appears on the display for about 3 seconds, then the duration of the previously selected programme is displayed. The symbol 7.2 will appear on the display. The delay time value decreases by one unit every hour. When only 1 hour remains, the time decreases every minute.

Child safety lock (7.3)

8

Stand by mode

If your laundry is not removed during 10 minutes after the programme is finished, the backlight of the display switches off and the energy saving system will be enabled.

Only the button 8 pilot light is blinking to indicate that the appliance has to be switched off.

By pressing any buttons the appliance will come out from the energy saving status and you could set another washing programme or switch off the appliance.

Indicator pilot lights (10)

After having pressed the button 8 , the FUNCTIONING pilot light ( 10.1 ) comes on.

When the pilot light 10.1 comes on this means that the machine is operating.

The DOOR pilot light ( 10.2 ) indicates if the door can be opened:

light on: the door cannot be opened

light blinking: the door is opening

light off: the door can be opened

When the appliance is performing additional rinses the EXTRA RINSE pilot light ( 10.3 ) comes on. To add an additional rinse, please see chapter «Select an additional rinse».

Personalization

Acoustic signals

The machine is provided with an acoustic device, which sounds in the following cases:

at the end of the cycle

in the event of operating problems.

By pressing the 3 and 4 buttons simultaneously for about 6 seconds, the acoustic signal is deactivated (except for the events of operating problems). By pressing these 2 buttons again, the acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appliance unsupervised and not to worry that children might be injured by or cause damage to the appliance.

This function remains able also when the washing machine is not working. There are two different ways to set this option:

Before pressing button 8 : it will be impossible to start the machine.

after pressing button 8 : it will be impossible to change any other programme or option. To enable or disable this option press simultaneously for about 6 seconds buttons 4 and 5 until the symbol 7.3 appears or disappears on or from the display.

Daily use

9

 

 

Daily use

Load the laundry

1.Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible.

2.Close firmly the door. You must hear a click during closing.

WARNING!

Do not embed the laundry between the door and the rubber joint.

Measure out the detergent and the fabric softener

Your new appliance was designed to reduce water, energy and detergent consumption. 1. Pull out the dispenser drawer until it

stops. Measure out the amount of deter-

gent required, pour it into the main wash compartment and, if you wish to carry

out the prewash phase, pour the deter-

gent into the compartment marked .

If you wish to perform the stain function, pour the stain remover into the compartment marked with blue arrow .

10Daily use

2.If required, pour fabric softener into the compartment marked (the amount

used must not exceed the MAX mark in the drawer).

Close the drawer gently.

Select the required programme by means of programme selector dial (1)

You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses) and the washing temperature according to the type of laundry.

The pilot light of button 8 starts blinking.

The selector dial can be turned either clockwise or anticlockwise. Position to Reset programme/ Switching OFF of the machine.

At the end of the programme the selector dial must be turned to position , to switch the machine off.

If you turn the programme selector dial to another programme when the machine is working, the yellow pilot light of button 8 will blink 3 times and the message Err is displayed on the display to indicate a wrong selection. The machine will not perform the new selected programme.

Select the desired TEMPERATURE (Button 2)

When selecting a programme, the appliance automatically proposes the default temperature provided for that programme.

Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine.

By selecting position (Cold) the machine will wash with cold water. To be used for extremely delicate items, such as curtains.

For the maximum and the minimum available wash water temperature, see «Washing programmes».

Daily use 11

Select the SPIN speed or the RINSE HOLD option (Button 3)

When the required programme has been selected, your appliance automatically proposes the maximum spin speed provided for that programme.

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine.

The relevant light will light up.

RINSE HOLD : by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows a blinking , the pilot light 10.2 goes on, the pilot light of button 8 is off and the door is blocked to indicate that the water must be emptied out.

To empty the water out please read chapter «At the end of the programme».

Programme option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing the button 8 .

When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

If an incorrect option is selected, the in yellow pilot light of the button 8 blinks for 3 times and the Err message appears on the display for some seconds.

For the compatibility among the washing programmes and the options see chapter «Washing Programmes».

Select the STAIN option (Button 4)

Select this option to treat heavily soiled or stained laundry with stain remover (extended main wash with time optimized stain action phase). The relevant light will light up.

This option is not available with a temperature lower than 40°C.

If you wish to perform a programme with the stain option, pour stain remover into stain compartment marked with a blue arrow.

SENSITIVE option (Button 5)

By selecting this option the washing intensity will be reduced. The machine adds one rinse in the programmes for COTTONS, 40-60 MIX, SYNTHETICS and ECONOMY. The relevant symbol will appear on the display.

This option cannot be selected together with EXTRA RINSE option.

This option is recommended for non fast coloured items and for frequently washed items.

Select the TIME SAVING option (Button 6)

This option allows you to modify the washing time, automatically proposed by the appliance.

DAILY: by pressing button 6 once, the relative pilot light comes on and the washing duration will be reduced to wash daily soiled laundry.

SUPER QUICK: by pressing button 6 twice, the relative pilot light remains lit, the washing duration will be reduced to wash lightly soiled laundry or items that have been used or worn for a short time. On the display will be visualized the decreased washing time.

Loading...
+ 25 hidden pages