AEG-Electrolux ENB3900M, ENB3400M, ENB3460, ENB3760X, ER3562BNS User Manual

...
0 (0)

Index

Safety Instructions

pág. 20

Installation

pág. 21 - 22

Changing the opening

 

directions of the doors

pág. 23

Regulation and Control

pág. 24 - 25

How to use your

 

Fridge-Freezer

pág. 26 - 27

Maintenance of your

 

Fridge-Freezer

pág. 28

Something not working

pág. 29 - 30

Normal noises when

 

functioning

pág. 31

Guarantee, Service

 

and Spare Parts

pág. 32

Technical Features

pág. 33

19

m Safety instructions

Warnings for your safety. Carefully read these instructions before installing and using the machine

m This appliance is designed to be operated by adults only. Children should not be allowed to tamper with the controls or play with the product.

m Make sure that the power plug is not squashed or damaged by the back of the fridge/freezer. Do not place heavy articles or the fridge/freezer itself on the power cord. Do not remove the power cord by pulling on its lead, particularly when the fridge/freezer is being pulled out of its niche. If the power plug socket is loose, do not insert the power plug. If the power cord is damaged, it must be replaced by a certified service agent or qualified service personnel. Damage to the cord may cause a shortcircuit, fire and/or electric shock.

m This appliance is heavy. Care should be taken when moving it.

m Repairs carried out by inexperienced persons may cause injuries or serious malfunctioning. Refer to the TECHNICAL OFICIAL SERVICE.

m The appliance should be left for at least 4 hours after installation before it is turned on in order to allow the refrigerant to settle.

m This product must only be serviced by an authorized Technical Oficial Service, and only genuine SPARE PARTS should be used.

m Before cleaning or reparing the appliance, make sure it is unplugged.

m It is dangerous to try and alter the specifications or modify this product in any way.

m These domestic appliances are designed to be used specifically for the storage and conservation of food.

m Frozen food must not be re-frozen once it has been thawed out.

m Manufacturer’s storage recommendations should be strictly complied with.

m Ice lollies can cause frost burns if consumed straight away from the freezer.

m Do not use electrical appliances inside the fridge/freezer.

m Do not place carbonate or fizzy drinks in the freezer as these may explode.

m Whenever you discard and old freezer make sure to:

m Take off the doors in order to prevent children being trapped inside.

Have the gas R600a from the cooling system removed by an authorised person before making it into scrap metal.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

20

Installation

Positioning

Place the refrigerator away from direct sunlight and heat sources.

Take off at least 50 mm. free over the appliance.

Never put something on the ventilator of the appliance.

Make sure the refrigerator is accurately levelled turning the adjustable feet on the front, in order to avoid vibrations and noises and to make sure that the doors shut properly.

In the documentation bag you will find two spacers that must be mounted as shown in the figure in the back of your appliance.

Please loosen the screw under its head and then unloosen again.

D594

The appliance should not be located in places with maximum temperatures more than:

+ 32°C for N/SN Class (classification on rating plate).

+ 43°C for T/ST Class (classification on rating plate).

If the temperatures are higher than those mentioned above, the functioning and the safety of the appliance could be affected.

Cleaning the interior

Do not use alcohol or any cleaning produts containing alcohol because they could damage the plastic parts of the appliance.

Before using the appliance for the first time, wash the interior with luke warm water and a neutral soap. This will help to remove the typical smell of a new fridge/freezer. Afterwards dry thoroughly.

Do not use detergents or abrasive powders as these will damage the finish.

Remove security elements used for transportation.

Electrical connection

mBefore plugging the appliance into a socket make sure that the voltage and frequency shown on the rating plate correspond to your home supply.

It is essential that the appliance should be properly earthed.

mFor this purpose the supply cable plug incorporates a special earth contact. If the sockets of your domestic wiring system are not earthed, have the appliance connected to a separate earth wire in accordance with existing safety regulations.

rating plate

Installation

Starting - up

Plug the appliance into the wall socket.

Within 20 seconds the electronics carry out a system test and switch the appliance on. The ON/OFF button lights up in green, the interior lighting comes on and the appliance starts working.

Starting up when the appliance is switched off: Press and hold down the ON/OFF button for three seconds. The ON/OFF button lights up in green, the interior lighting comes on and the appliance starts working.

The temperature alarm (a beeping noise) could go on during the start up phase. If this happens push the temperature alarm button. (See section on the temperature control for more details).

door alarm temperature alarm

fast freeze

 

 

 

 

 

 

 

 

 

on/off

 

 

 

temperature

 

 

temperature

 

 

 

 

 

 

 

 

 

 

 

 

control freezer

 

 

control fridge

 

Fig. 4

22

AEG-Electrolux ENB3900M, ENB3400M, ENB3460, ENB3760X, ER3562BNS User Manual

Changing the opening direction of the doors

If you wish to change the opening side of the doors proceed as follows:

1... Open the freezer door. All the appliances have a ventilation socle at the bottom. Remove it pushing strongly on the central and upper part. The upper supports will be loosed takes the piece out. Then, take the hinge cover off the opposite side of the ventilation cover and place it as required. (see fig. 5).

2... Removing the central hinge:

Open both doors.

Remove the external pin and then close the freezer door.

Remove the other pin and close the fridge door.

Taking care the doors do not fall, pull them off till bolts are loose.

Put the doors carefully on the floor.

3... Chage the bolts of the upper and lower hinges to the opposite side. Change also the plastic covers of the central partition.

4... Change the door self-closing system, putting the freezer door’s on the fridge door and viceversa.

5... Fit the freezer door into the lower hinge bolt and put the central hinge into the door.

6... Fit the fridge door into the upper hinge bolt. Pulling both doors outwards, fit the central hinge bolt too. Place the doors.

7... Open the fridge door and screw the central hinge pin. Then, open the freezer door and screw the other pin.

8... Assemble socle keep the door open, close it up to the metallic part.

Fit the two lower flaps of the plastic piece into the metallic one, press down wards the two upper hooks (without stopping pressing the socle).

Push it to wards the metallic one till they fit perfectly.

9...Dismantle the vertical handles and assemble them in the opposite side. Cover the holes with

the plastic lids that were situated where the handles are presently.

Once finished make sure that all joints close perfectly well all around the door and check that the internal light turns off when the fridge door closes. (see Fig. 6)

Fig. 5

Fig. 6

23

Loading...
+ 11 hidden pages