Fridge-Freezer
Instruction Book
P/N 241631700 |
(0105) |
Welcome & Congratulations
Welcome |
2 |
Safety Instructions |
3 - 4 |
Installation -- Includes Connecting |
|
Ice Maker To Water Supply |
5 - 6 |
Congratulations on your purchase of a new fridge-freezer! We here at Electrolux Home Products are very proud of our product and we are completely committed to providing you with the best service possible.
Please read this Instruction Book very carefully. It contains valuable information on how to properly maintain and use your new fridge-freezer.
We know you’ll enjoy your new fridge-freezer and Thank You for choosing our product. We hope you consider us for future purchases.
Door Removal |
|
7 |
Instructions |
|
|
Features at a Glance |
|
8 |
Temperature Controls |
9 |
- 10 |
Looking Inside |
11 |
- 13 |
Automatic Ice and Water |
|
|
Dispenser |
14 |
- 18 |
Food Storage |
|
19 |
& Energy Saving Tips |
|
|
Normal Operating Sounds |
20 |
|
Care & Cleaning |
21 |
- 22 |
Warranty |
|
23 |
Something Not |
|
|
Working |
24 |
- 27 |
PLEASE READ AND SAVE THESE INSTRUCTIONS
This Use & Care Manual provides specific operating instructions for your model. Use your fridge-freezer only as instructed in this manual. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.
Please record your model and serial numbers below for future reference.This information is found on the serial plate located inside the refrigerator compartment.
NOTE: Use only water to clean serial plate.
Model Number:
Serial Number:
Purchase Date:
Please complete and mail in the Product Registration Card included with your fridge-freezer.
2
Important Safety Instructions
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of safety. You MUST read it carefully before installing or using the appliance.
If you are unsure about any of this information please contact our customer services department on 08705 950 950.
Installation
•This appliance is heavy. Care should be taken when moving it.
•It is dangerous to alter the specifications or attempt
to modify this product in any way.
•Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Important: if the supply cable is damaged, it must be replaced by a special cable available from your local Service Force Centre.
•Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
•Parts which heat up should not be exposed. Whenever possible, the back of the appliance should be close to a wall but leaving the required distance for ventilation as stated in the installation instructions.
•The appliance should be left for 2 hours after installation before it is turned on, in order to allow the refrigerant to settle.
Child Safety
•Do not allow children to tamper with the controls or play with the product.
•Keep all packaging well away from children.
During Use
•This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs only.
•Frozen food must NOT be re-frozen once it has thawed out.
•Do not place carbonated or fizzy drinks in the freezer.
•Do not remove items from the freezer if your hands are damp/wet, as this could cause skin abrasions or frost/ freezer burns.
3
•Ice lollies can cause frost/freezer burns if consumed straight from the freezer.
•Manufacturers storage recommendations should be strictly adhered to. Refer to relevant instructions.
Maintenance and Cleaning
•Switch off and unplug the appliance before carrying out any cleaning or maintenance work.
Servicing
•This product should be serviced by an authorised engineer and only genuine spare parts should be used.
•Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Electrolux Service Force Centre and always insist on genuine spare parts.
At the end of the Appliance Life
•When disposing of your appliance, use an authorised disposal site.
•Remove the plug and doors to prevent young children being trapped inside.
Important Safety Instructions
Electrical connections
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this safety measure not be observed.
If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.
Remove the fuse from the cut off plug. The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13amp socket in another part of your home.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow |
- Earth |
Blue |
- Neutral |
Brown |
- Live |
For replacement, use a 13amp BSI362 fuse. Only ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.
A replacement cover/carrier must be obtained from your local Service Force Centre.
This appliance complies with the E.E.C. Directive No. 87/308 of 2.6.87 relative to radio interference suppression.
This appliance complies with the following E.E.C. Directives:
-73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
-89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug, proceed as follows:
+ ( ,
-. /
-. |
,
,
./01
Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the letter <<E>> or the earth symbol
or coloured green and yellow.
Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter ÇNÈ or coloured black.
Connect the brown (live) wire to the terminal in the plug which is marked with the letter ÇLÈ or coloured red.
The plug moulded onto the lead incorporates a fuse.
4
Installation
This Owner’s Guide provides specific operating instructions for your model. Use the fridge-freezer only as instructed in this Use & Care Manual. Before starting the fridge-freezer follow these important first steps.
LOCATION
•Choose a place that is near an earthed 13A socket. Do Not use an extension cord or an adapter plug.
•If possible, place the fridge-freezer out of direct sunlight and away from the cooker, dishwasher or other heat sources.
•The fridge-freezer must be installed on a floor that is level and strong enough to support a fully loaded fridge-freezer.
•Consider water supply availability for models equipped with an automatic ice maker.
INSTALLATION
Do Not install the fridge-freezer where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the fridge-freezer.
Do Not block the toe grille on the lower front of your fridge-freezer. Sufficient air circulation is essential for the proper operation of your fridge-freezer.
Installation Clearances
To Install Toe Grille:
1.Open freezer and fresh food compartment doors.
2.Line up toe grille at base of fridge-freezer,
making sure the four bottom tabs are resting through holes at base of cabinet.
3.Starting from left side of toe grille, press in on
first top tab using your thumb and push toe grille forward until it snaps in place. Continue this process until all tabs are snapped in place and toe grille is secured to fridge-freezer.
•Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:
Sides & Top --------------- |
3/8” (1 cm) |
Back ------------------------ |
1” (2.5 cm) |
DOOR OPENING
NOTE: If your fridge-freezer is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.
Your fridge-freezer should be positioned to allow easy access to a counter when removing food. For best use of drawers and freezer baskets, the fridge-freezer should be in a position where both the refrigerator and freezer doors can be fully opened.
TOE GRILLE INSTALLATION / REMOVAL
To Remove Toe Grille:
1.Open freezer and fresh food compartment doors.
2.Working from left side of toe grille, slip your fingers between top of toe grille and cabinet. Gently pull forward until first set of tabs are free. Slide your hand down past the free tabs and pull forward again until the second set of tabs are free. Continue this process until all tabs are free and the toe grille can be removed. (See graphic at top of page in right column.)
5
LEVELING
All four corners of your fridge-freezer must rest firmly on a solid floor.Your fridge-freezer is equipped with adjustable front rollers to help level your unit. To ensure proper door seal and assist door closing, the fridge-freezer should be tilted 1/4” (6 mm), front to back.
To LevelYour Fridge-Freezer:
1.Remove toe grille.(See “To RemoveToe Grille”.)
2.Use flat-blade screwdriver or 3/8” socket wrench to adjust
front rollers.
NOTE: The fridge-freezer doors are designed to shut by themselves within a 20 degree opening.
3.Check both doors to be sure seals touch cabinet on all four sides.
Installation - Connecting Ice Maker To Water Supply
To avoid electric shock, which can cause death or severe personal injury, disconnect the fridgefreezer from electrical power before connecting a water supply line to the fridge-freezer.
To Avoid Property Damage:
•Copper tubing is recommended for the water supply line.Water supply tubing made of ¼” plastic is not recommended since it greatly increases the potential for water leaks. Manufacturer will not be responsible for any damage if plastic tubing is used for supply line.
•DO NOT install water supply tubing in areas where temperatures fall below freezing.
•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.
IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.
Before InstallingThe Water Supply Line,You Will Need
•BasicTools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver
•Access to a household cold water line with water pressure between 20 and 100 psi.
•A water supply line made of ¼ inch (6.4 mm) OD, copper tubing.To determine the length of copper tubing needed, you will need to measure the distance from the ice maker inlet valve at the back of the fridge-freezer to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the fridge-freezer can be moved out for cleaning (as shown).
•A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.
•A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.
To Connect Water Supply Line To Ice Maker Inlet Valve
1. Disconnect fridge-freezer from electric power source.
2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shut off valve.
3. Unscrew plastic cap from water valve inlet and discard cap.
4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, as shown.
5. Push water supply line into water valve inlet as far as it will go (¼ inch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water supply line to rear panel of fridge-freezer as shown.
7.Coil excess water supply line (about 2½ turns) behind fridge-freezer as shown and arrange coils so they do not vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any connections that leak.
9. Reconnect fridge-freezer to electrical power source.
10. Make sure ice maker power switch is turned On (See page 14 for location of power switch).
IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may cause ice maker to cycle two or three times before making a full tray of ice. New plumbing may cause ice to be discolored or have poor flavor. Discard ice made during the first 24 hours.
6
Door Removal Instructions
DOOR REMOVAL INSTRUCTIONS:
If it is necessary to move the fridge-freezer through narrow doorways, follow these steps to remove the doors.
IMPORTANT: Before you begin, remove electrical power cord from wall outlet. Remove any food from door shelves.
1. Disconnect electrical supply.
2.Open both doors, then remove toe grille (see page 4 to learn how).
3.Close doors.
To Remove Refrigerator Door:
1.Remove top hinge cover screw on refrigerator door and remove cover.
2.Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced.
3.Remove top hinge and lift refrigerator door off bottom hinge pin. Set door aside.
4.Remove bottom hinge, if necessary.
5.Reverse this procedure to reinstall refrigerator door.
To Remove Freezer Door:
1. Disconnect water line coming from lower hinge of freezer door at connection located under front of freezer: Press outer ring against face of fitting, then pull to remove tube.
2. Remove top hinge cover screw on freezer door and remove cover.
3.Disconnect wiring harness connector plug at top hinge: place your thumbs on flat sides of each connector and bend both parts back and forth, then with
firm grasp, pull both pieces apart.
4. Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced.
5. Remove top hinge, allowing wiring harness to pull through hinge and lift freezer door off of bottom hinge pin. Lay door down flat to avoid kinking water line.
6. Remove bottom hinge, if necessary.
7. Reverse this procedure to reinstall freezer door.
When both doors have been reinstalled, connect water line by inserting tube and pushing until mark touches face of fitting, replace toe grille and plug in electrical power cord.
7
Features At A Glance
Features may vary according to model
8
Temperature Controls
COOL DOWN PERIOD
To ensure safe food storage, allow the fridge-freezer to operate with the doors closed for at least 6 hours before loading it with food.
REFRIGERATOR & FREEZER CONTROLS
NOTE: When changing control settings, wait 24 hours before making additional adjustments.
After 24 hours, adjust the controls as needed. Make your adjustments small and gradual; allowing time for temperatures to change and stabilize. Refer to the adjacent guidelines for temperature settings.
The range of possible settings is 1 through 9, with 9 being the coldest.
Both the Freezer and Fresh Food compartments are preset at the factory to 5, the midpoint temperature setting.
To adjust the temperature to a higher or lower setting, press the Warmer or Colder button closest to the display.The first time you press the button, the display shows the last setting you entered. Each press of the button after that increments the setting by one.
The display shows your new setting momentarily, then changes back to the current temperature.
IF THE TEMPERATURE DISPLAYS FLASH...
If ever you see both temperature displays continously flashing, it may indicate that the control system has detetcted a performance problem. Call your local Service Force Centre who can interpret the flashing message.
To maintain temperatures, a fan circulates air in the refrigerator and freezer compartments. For good circulation, do not block cold air vents with food items.
Temperature Adjustment Guide
If Fresh Food compartment is too warm
If Fresh Food compartment is too cold
If Freezer compartment is too warm
If Freezer compartment is too cold
Adjust Fresh Food control one number higher by pressing the Colder button.
Adjust Fresh Food control one number lower by pressing the Warmer button.
Adjust Freezer control one number higher by pressing the Colder button.
Adjust Freezer control one number lower by pressing the Warmer button.
9
Loading...