88031KF-N
User manual |
Ceramic glass induction |
|
hob |
2 Contents
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
Contents
Operating Instructions |
2 |
Safety information |
2 |
Description of the appliance |
4 |
Operating the appliance |
6 |
Tips on cooking and frying |
11 |
Cleaning and care |
13 |
What to do if ... |
14 |
Disposal |
16 |
Installation Instructions |
16 |
Safety information |
16 |
Service |
19 |
Subject to change without notice
Operating Instructions
Safety information
WARNING!
Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
Correct use
•This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
•Do not leave the appliance unattended during operation.
•This appliance should be used only for normal domestic cooking and frying of food.
•The appliance must not be used as a work surface or as a storage surface.
•Additions or modifications to the appliance are not permitted.
•Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
•Small children must be kept away from the appliance.
•Only let bigger children work on the appliance under supervision.
Safety information |
3 |
|
|
•To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.
General safety
•The appliance may only be installed and connected by trained, registered service engineers.
•Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
•In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply, to prevent the possibility of an electric shock.
•Repairs to the appliance must only be carried out by trained registered service engineers.
Safety during use
•Remove stickers and film from the glass ceramic.
•There is the risk of burns from the appliance if used carelessly.
•Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware.
•Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
•Switch the cooking zones off after each use.
•Users with implanted pacemakers should keep their upper body at least 30 cm from induction cooking zones that are switched on.
•Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and saucepan lids on the cooking surface, as they can get hot.
Safety when cleaning
•For cleaning, the appliance must be switched off and cooled down.
•For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
•The glass ceramic can be damaged by objects falling onto it.
•The edge of the glass ceramic can be damaged by being knocked by the cookware.
•Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface.
•Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway.
•Do not use the cooking zones with empty cookware or without cookware.
•To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.
•The ventilation gap of 5mm between the worktop and front of the unit underneath it must not be covered.
4 Description of the appliance
Description of the appliance
Cooking surface layout
1 |
|
2 |
mm 
180
mm
145
mm 210
mm 180
4 |
5 |
3 |
1Induction cooking zone 1850 W, with power function 2500 W
2Induction cooking zone 1400 W, with power function 1800 W
3Induction cooking zone 1850 W, with power function 2500 W
4Induction cooking zone 2300 W, with power function 3700 W
5Control Panel
Control panel layout
1 |
|
|
2 |
|
3 |
|
|
4 |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 |
8 |
7 |
1Child lock with display
2Cooking zone indicators - Timer function
3Timer display
4Power function
5Heat setting indicator
6Heat setting selection
7Timer
8STOP+GO with indicator
9On/Off with indicator
Description of the appliance |
5 |
|
|
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor fields which activate a desired function. Do not cover other sensor fields.
If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance switches itself off.
|
|
|
Sensor field |
|
|
Function |
|
|
|
|
On / Off |
Switches appliance on and off |
|||
|
|
|
|
|
|
|
|
|
|
|
Child lock |
Locking control panel for children |
|||
|
|
|
|
|
|
|
|
|
|
|
STOP+GO |
To switch the Keep Warm setting on/ off |
|||
|
|
|
|
|
|
|
|
|
|
|
Power |
Switching the power function on and off |
|||
|
|
|
|
|
|
|
|
|
|
|
Timer |
Timer selection |
|||
|
|
|
|
|
|
|
|
|
|
|
Increase settings |
To increase Timer time |
|||
|
|
|
|
|
|
|
|
|
|
|
Reduce settings |
To reduce Timer time |
|||
|
|
|
|||||
Displays |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
Display |
|
|
Description |
|
|
|
|
|
|
|
|
The cooking zone is switched off |
|
|
|
|
|
|
|
|
|
|
|
|
Keep Warm settings |
|
|
Keep Warm / STOP+GO function is switched on |
|
|
|
|
|
|
||
|
- |
|
Heat settings |
|
|
To set heat settings |
|
|
|
|
|
Auto Warm-up |
|
|
The Auto Warm-up function is switched on |
|
|
|
|
|
|
|
|
|
|
+ digit |
|
Fault |
|
|
Malfunction has occurred |
|
|
|
|
|
|
|
|
|
|
|
|
Pan detection |
|
|
Cookware is unsuitable or too small or no cookware |
|
|
|
|
|
|
|
has been placed on the cooking zone |
|
|
|
|
Residual heat |
|
|
Cooking zone is still hot |
|
|
|
|
|
|
|
|
|
|
|
|
Child safety device |
|
|
Lock/Child safety device is set |
|
|
|
|
|
|
|
|
|
|
|
|
Power |
|
|
Power function is switched on |
|
|
|
|
|
|
|
|
|
|
|
|
Automatic Switch off |
|
|
Switch off is active |
|
|
|
|
|
|
|
|
Residual heat indicator
WARNING!
Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indicator 
.
Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated by the residual heat of the cookware.
6 Operating the appliance
Operating the appliance
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
|
|
|
Control panel |
Display |
Pilot light |
Switch on |
|
Touch |
for 1 second |
/ |
lights up. |
Switch off |
|
Touch |
for 1 second |
/ none |
goes out. |
|
|
|
|
|
|
After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Setting the heat setting
|
Control Panel |
|
Display |
To set the heat setting |
Touch the desired heat setting, |
to |
/ |
|
if necessary, correct to the left |
|
|
|
or to the right |
|
|
|
|
|
|
Switch off |
Touch 0 |
|
|
|
|
|
|
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
|
Control panel |
Display |
To switch on |
Touch |
(for 4 seconds) |
|
|
|
To switch off |
Touch |
previously set heat setting |
|
|
|
When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode then back to the heat setting they were at before
|
Control panel |
Display |
|
|
|
To switch on |
Touch |
|
|
|
|
To switch off |
Touch |
Previous heat setting (not automatic warm-up or power |
|
|
function) |
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field 
.
Loading...