AEG KB7100000 User Manual

0 (0)

KB7100000

EN OVEN

USER MANUAL

2

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…

Visit the webshop at:

www.aeg-electrolux.com/shop

Contents 3

CONTENTS

4 Safety information

7 Product description

8 Before first use

9 Control panel

10 Daily use

11 Clock functions

12 Automatic programmes

13 Using the accessories

14 Additional functions

15 Helpful hints and tips

30 Care and cleaning

33 What to do if…

34 Installation

38 Environment concerns

The following symbols are used in this user manual:

Important information concerning your personal safety and information on how to avoid damaging the appliance.

General information and tips

Environmental information

Subject to change without notice

4 Safety information

SAFETY INFORMATION

Before the installation and use, read this manual carefully:

For your personal safety and the safety of your property

For the respect of the environment

For the correct operation of the appliance.

Always keep these instructions with the appliance also if you move or sell it.

The manufacturer is not responsible if incorrect installation or use results in damage.

Children and vulnerable people safety

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved. Children shall not play with the appliance.

Keep all packaging away from children. There is the risk of suffocation or physical injury.

Keep children and animals away from the appliance when the door is open or the appliance is in operation. There is the risk of injury or other permanent disability.

If the appliance has Child Lock or Key Lock (Control Lock) function, use it. It prevents children and animals from accidental operation of the appliance.

General safety

Do not change the specifications of this appliance. There is the risk of injury and damage to the appliance.

Do not let the appliance stay unattended during operation.

Switch off the appliance after each use.

Installation

Only an approved electrician can install and connect the appliance. Contact an approved service centre. This is to prevent the risks of structural damage or physical injury.

Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier.

Remove all packaging, stickers and layers from the appliance before first use. Do not remove the rating plate. It can invalidate the guarantee.

Make sure that the appliance is disconnected from the power supply during the installation.

Be careful when you move the appliance. The appliance is heavy. Always use safety gloves. Do not lift the appliance by the handle.

The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.

Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable.

Safety information

5

 

 

Make sure that the appliance is installed below and adjacent safe structures.

Keep the minimum distances to the other appliances and units.

The appliance cannot be positioned on a base.

Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer.

Electrical connection

The appliance must be earthed.

Make sure that the electrical data on the rating plate agree with your domestic power supply.

Information on the voltage is on the rating plate.

Always use a correctly installed shockproof socket.

Do not use multi-way plugs, connectors and extension cables. There is the risk of fire.

Do not replace or change the mains cable. Contact the service centre.

Make sure not to squash or cause damage to the mains plug (if applicable) and cable behind the appliance.

Do not pull the mains cable to disconnect the appliance. Always pull the mains plug – if applicable.

Use

The appliance is only for domestic use. Do not use the appliance for commercial and industrial use.

Only use the appliance for domestic cooking tasks. This is to prevent physical injury to persons or prevent damage to property.

Do not use the appliance as a work surface or storage surface.

The interior of the appliance and the accessories become hot during use. There is the risk of burns. Use safety gloves when you insert or remove the accessories or pots.

Be careful when you remove or install the accessories to prevent damage to the oven enamel.

Always stay away from the appliance when you open the door while the appliance is in operation. Hot steam can release. There is the risk of skin burns.

To prevent damage or discoloration to the enamel:

do not put any objects directly on the appliance floor and do not cover it with aluminium foil;

do not put hot water directly into the appliance;

do not keep moist dishes and food in the appliance after you finish the cooking.

Discoloration of the enamel has no effect on the performance of the appliance so it is not a defect in the sense of the warranty law.

Do not apply pressure on the open door.

Always close the appliance door when you cook, even while grilling.

6 Safety information

Care and cleaning

Before maintenance, switch off the appliance and disconnect the appliance from the power supply.

Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break.

Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.

Regular cleaning prevents the surface material from deteriorating

Use a deep baking tray for very moist cakes to prevent that fruit juices cause stains that can be permanent.

For your personal safety and the safety of your property, only clean the appliance with water and a soap. Do not use flammable products or products that can cause corrosion.

Do not clean the appliance with steam cleaners, high-pressure cleaners, sharp objects, abrasive cleaning agents, abrasive sponges and stain removers

If you use an oven spray, follow the instructions from the manufacturer.

Do not clean the glass door with abrasive cleaning agents or metal scraper. Heat resistant surface of the inner glass can break and shatter.

When the door glass panels are damaged they become weak and can break. You must replace them. Contact the service centre.

Be careful when you remove the door from the appliance. The door is heavy!

Do not clean catalytic enamel (if applicable).

Risk of fire

Open the door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air. There is the risk of fire.

Do not let sparks or open flames come near the appliance when you open the door.

Do not put flammable products or items that are wet with flammable products, and/or fusible objects (made of plastic or aluminium) in, near or on the appliance.

Oven lamp

Bulb lamps used in this appliance are special lamps selected for household appliances use only. They cannot be used for the full or partial illumination of a household room.

If it becomes necessary to replace the lamp use one of the same power and specifically designed for household appliances only.

Disconnect the appliance from the power supply before the replacement of the oven lamp. There is the risk of electrical shock.

Service centre

Only an approved engineer can repair or work on the appliance. Contact an approved service centre.

Use only original spare parts.

Disposal of the appliance

• To prevent the risk of physical injury or damage

AEG KB7100000 User Manual

Product description

7

 

 

Disconnect the appliance from the power supply.

Cut off the mains cable and discard it.

Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.

PRODUCT DESCRIPTION

General overview

1

 

2

 

 

3

 

3

4

 

 

7

2

5

 

1

6

1Control panel

2Electronic programmer

3Grill and heating element

4Oven lamp

5Fan and heating element

6Shelf support, removable

7Shelf positions

8 Before first use

Oven accessories

• Wire shelf

For cookware, cake tins, roasts.

• Baking tray

For cakes and biscuits.

BEFORE FIRST USE

WARNING!

Refer to "Safety information" chapter.

Initial Cleaning

Remove all parts from the appliance.

Clean the appliance before first use.

Refer to chapter "Care and Cleaning".

Setting and changing the time of day

The appliance only operates after you set the time.

When you connect the appliance to the electrical supply or after a power cut, the symbol

for the time of day

flashes. Touch the control

 

or

to set the time.

 

Changing the time:

 

 

 

 

1. Touch the controlagain and again until the symbolflashes.

2. Touch the control or to set the time.

The display shows the time and the flashing stops after approximately 5 seconds .

You can only change the time if:

the Child safety is off.

the Minute minderis off.

the Durationis off.

the End is off.

all the oven functions are off.

Control panel

9

 

 

CONTROL PANEL

Electronic programmer

1

2

 

 

 

4

 

5

 

6

 

7

 

8

 

9

Touch the sensor fields to operate the appliance.

 

 

Sensor Field

 

Function

 

Description

 

 

 

 

 

 

 

 

 

1

 

-

 

 

DISPLAY

 

It shows the settings of the appliance.

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

ON/OFF

 

Touch to activate or deactivate the appliance.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

DOWN

 

Touch to set an oven function.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

UP

 

Touch to set an oven function.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

PROGRAMME SELEC-

 

Touch to set an automatic programme.

 

 

 

 

 

 

TOR

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

FAST HEAT UP

 

Touch to decrease the heat up time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

MINUS

 

Touch to set the temperature or time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

PLUS

 

Touch to set the temperature or time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

CLOCK

 

Touch to set a clock function.

 

 

 

 

 

 

 

 

 

10 Daily use

Display

1

 

2

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

5

 

4

1Memory: P

2Temperature/Time of day display

3Clock functions/Clock display

4Heat up indicator

5Automatic Programmes

6Oven functions

General instructions

When you set the function, it comes on in the display and the temperature starts to increase or the time starts to count down.

When you get the set temperature, a sound operates.

When you set a function or open the oven door, the lamp comes on.

The oven lamp goes out after 10 minutes when the door is open and the oven does not operate.

Heat up indicator

If you set an oven function, the bars in the symbol slowly come on one by one. The bars show that the temperature in the appliance increases or decreases.

When the appliance is at the set temperature, the Heat up indicator goes off the display.

Residual heat indicator

When the cooking is completed, the display shows the residual heat temperature that is higher than 40°C.

DAILY USE

WARNING!

Refer to "Safety information" chapter.

To operate the appliance you can use:

manual mode -to set an oven function, the temperature and the cooking time manually.

automatic programmes -to prepare a dish when you do not have a knowledge or experience in cooking.

Clock functions 11

Setting the oven function

1.Activate the appliance.

2.Touch or to set an oven function.

The display shows an automatic temperature. If you do not change the temperature in approximately 5 seconds, the appliance starts to operate.

Oven Functions

 

 

Functions

 

Use

 

 

 

 

 

Ventitherm ® Fan Op-

 

To roast and bake on two levels at the same time.

 

 

erated Cooking

 

 

 

 

 

 

 

 

 

Rotitherm Roasting

 

To roast larger pieces of meat or poultry on one level. To

 

 

 

 

brown food, for example gratin.

 

 

 

 

 

 

 

Single Economy Grill

 

To grill flat foodstuffs and to toast.

 

 

 

 

 

 

 

Defrost/Drying

 

To defrost and dry herbs, fruits and vegetables.

 

 

 

 

 

 

 

Low Temperature

 

To prepare very tender and juicy roasts.

 

 

Cooking

 

 

 

 

 

 

 

Changing the oven temperature

Touch

 

or

to increase or decrease the temperature in 5 °C steps.

 

Fast heat up function

The Fast heat up function decreases the heat up time.

CAUTION!

Do not put the food in the appliance when the Fast heat up function operates.

1. Set the oven function and if it is necessary, change the automatic temperature.

2. Touch . The symbol comes on in the display. When the Fast heat up function operates, the bars of the heat up indicator flash one after the other.

When the appliance operates at the set temperature, the bars of the heat up indicator come on. An acoustic signal sounds. The symbol goes out from the display.

At this time, the oven function operates automatically and you can put the food in the appliance.

CLOCK FUNCTIONS

Clock functions

SYMBOL

FUNCTION

 

DESCRIPTION

 

 

 

 

 

MINUTE MINDER

 

Use to set a countdown. When the time ends, an acoustic

 

 

 

signal sounds. This function has no effect on the operation

 

 

 

of the oven.

 

 

 

 

 

DURATION

 

Use to set how long the oven operates.

 

 

 

 

 

END

 

Use to set when the oven stops.

 

 

 

 

12

Automatic programmes

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMBOL

FUNCTION

 

DESCRIPTION

 

 

 

 

 

 

 

TIME OF DAY

 

Shows the time. To set, change or check the time. Refer to

 

 

 

 

"Setting and changing the time of day".

 

 

 

 

 

Setting the clock

1.Activate the appliance and set an oven function and temperature (not necessary for Minute minder and Time of day).

2.Touch again and again until the display shows the necessary clock function and the related symbol, for example Minute minder.

3. Touch or to set the necessary time.

When the set time ends, an acoustic signal sounds for 2 minutes. “00.00” goes on in the display and the related function indicator flashes. The appliance deactivates automatically. Touch a sensor field to stop the acoustic signal.

General instruction:

• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5 seconds, touch orto set the time.

If you set the time, the symbol continues to flash for approximately 5 seconds. After these 5 seconds, the symbol comes on. The time starts to count down for Minute minder. For Duration and End the time starts to count down after the function starts.

If you want to delay the start of the cooking time use End function .

If you want to end cooking earlier (before end of clock functions) use.

AUTOMATIC PROGRAMMES

WARNING!

Refer to "Safety information" chapter.

Automatic Programmes

For an automatic programme, use the recipes from section "Automatic programmes".

Setting a programme

 

 

 

 

1.

Activate the appliance.

 

 

 

 

2.

Use

to access the automatic programmes menu.

 

3.

Use

or

to set an automatic programme (P1 to P12).

 

 

The symbol for the function comes on in the display.

 

 

The cooking time and

come on in the display.

 

 

Touch the clock control

. Then, touch the

 

or control to set the cooking time.

 

 

 

The oven activates automatically after approximately 5 seconds.

When set time ends, an acoustic signal sounds for 2 minutes.

flashes. The oven stops

automatically. Touch a control to stop the acoustic signal.

 

Loading...
+ 28 hidden pages