User’s Manual
B3007H-L-B 30” Built-in Oven -
User’s Manual
Congratulations on the purchase of your AEG appliance.
We are sure it will provide many years of great cooking experience.
You may find that it has different features and characteristics to your last appliance.
It is essential you read this operation manual thoroughly to fully understand all of the various functions and operations. Experiment with your cooking and take advantage of the features your new appliance offers.
This manual should be retained for future reference. Should ownership of the appliance be transferred, please ensure that the manual is also passed onto the new owner.
Contents
A - |
Installation check and warnings |
Page 3-4 |
B - |
Using the appliance for the first time |
Page 5 |
C - |
Electronic Programmer Operation |
Page 6-11 |
D- |
Cooking modes and instructions |
Page 12-18 |
E- |
Cleaning and maintenance |
Page 19-23 |
F- |
Trouble shooting guide |
Page 24 |
G- |
Installation instructions |
Page 24-30 |
H- |
Electrical wiring diagrams and instructions |
Page 31-32 |
I- |
Warranty |
Page 33 |
2
A - Installation check and warnings
IMPORTANT:
Please ensure that the oven cavity, venting and wiring is as specified in the relevant section G/H of this manual.
A licensed electrician with relevant qualifications must perform electrical work when installing or servicing the appliance. The supply cable and fuse rating must be suitable for the appliance. You must never repair or replace any part of the appliance unless specifically recommended in the operation manual.
Ventilation opening must not be covered or obstructed in any way.
DO NOT use aluminum foil on the base of ovens
The use of foil on the base of the oven to avoid spillage and improve cleaning is not recommended. The bottom element is concealed under the base of the oven liner (not exposed). Foil or dishes with reflective qualities must never be placed on the base of the oven during cooking as the concentration of direct and reflected heat will damage the enamel surface.
Damage resulting from such use is not covered under the provisions of the warranty.
Initial heat up
Some smoke and smell may be noticed during the initial heat up cycle. This should quickly dissipate.
If abnormal levels of smoke are observed (i.e.: it is not food that is burning), have the appliance thoroughly checked.
Don’t use the appliance as a space heater
The appliance must never be used for warming or heating the surrounding room. Combustible materials must never be placed on or near the appliance.
Do not leave children alone
Children must not be left unsupervised in the area where the appliance is in use. Children must never be allowed to sit or stand on any part of the appliance.
Wear proper apparel when using the appliance
Loose fitting, hanging or highly flammable garments (such as synthetics) should never be worn while using the appliance.
Use only dry pot holders
Moist or damp pot holders on hot surfaces may result in burns from steam. Do not allow pot holder to touch hot heating elements. Do not use a towel or bulky cloth when handling hot cooking utensils in the appliance.
Oven compartments must never be used for storage
Items, particularly flammable materials, must never be stored in an oven or near surface units.
Do not use water on grease fires
Fires or flame should be smothered using flameproof material or extinguished using a dry chemical or other suitable fire retardant.
3
Accessories
Your appliance should come equipped with the following items.
Single Oven – SEO 60, SEO 76, SEO 90
1 x pair of Retractable Slide Runners fitted to upper position and capable of being moved to any selected position as required
1 x Deep Enameled Roasting Pan with dual height reversible Grill Rack insert – ready for sliding into side rack positions or fitting onto Retractable Slide Runners
2 x Wire Oven Shelves that can be fitted into Retractable Slide Runners or for sliding into side rack positions
Note: Additional Retractable Slide Runners are available as an optional extra and can be fitted at any time
Note: Additional oven shelves and pans are available as optional extras.
Double Oven – DEO 60, DEO 76
Note Upper Oven as per Single Oven above
Lower Oven
1 x pair of Retractable Slide Runners to accommodate Enameled Grill Pan or Wire shelves
1 x Deep Enameled Roasting Pan with dual height reversible Grill Rack insert
2 x Wire Oven shelf that can be fitted onto Retractable Slide Runners or for sliding into side rack positions
4
B- Using the appliance for the first time
After installation remove all notification labels (not identification or warning labels) and packaging materials. After cleaning make sure cleaned surfaces are thoroughly rinsed and wiped dry using a clean, soft cloth.
NOTE: oven will not operate unless time clock is set
The clock will require setting when you first turn on the power (or following a power failure).
At the power on the timer shows the clock flashing and is increased by one unit every minute. The oven does not work and need to adjust the time.
Burning in
Before cooking in the appliance an initial pre-heating is required to burn off the fine oil film used to protect the elements for shipping. The first time you heat up the oven (or grill) the oil will be given off as smoke, which is perfectly normal.
Select a cooking mode and set the oven temperature to 180°C. With the oven door closed, leave for approximately 5 minutes.
Repeat the above step for each cooking mode.
After completing the above make sure all controls are turned off. The oven is now ready for cooking and grilling.
NOTE:
On oven start up or possibly at other times, due to electricity supply deviations – the programmer may freeze on a function – if this occurs we recommend that, after checking other solutions without success, it is recommended that power supply be disconnected to the appliance and allow it to be in this position for some minutes before reconnecting. This may have a result of clearing the frozen position allowing you to reset the programmer for normal operation.
Cooling Fan
The Ovens are provided with a cooling fan motor to reduce the heat around the oven. The fan motor is activated, independently from oven temperature, at the start of cooking program.
When you end the cooking program, a period of observation starts, during which the cooling fan is kept on if the temperature is over 50°C
This safeguards both the oven and the adjoining cupboards from the possibility of temperature damage.
Safety Thermostat
Your oven is fitted with an over temperature sensor that will automatically shut down your oven for a period if it is deemed to be overheatingthis sensor is fitted to the rear wall of the oven, inside the outer case – it will only activate in extreme circumstances and is provided as protection to the appliance and the adjoining furnishings. If activated it will shut down the appliance for a short time and will automatically reset allowing normal operations – you should consult your service technician if the problem re-occurs.
5
TOUCH-CONTROL KEYS
The “touch-control” keys shell be operated by the fingers ( just touching the key ). When using touch controls it is best to use the ball of your finger rather than the tip.
C - Electronic Programmer Operation
Temperature |
Timer functions |
Oven functions |
display |
display |
display |
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
|||||
1-2 temperature |
3 Oven |
|
4-5Time |
6 programmer |
7-8 oven function |
|||||||
|
setting |
On-off |
|
setting |
functions selection |
|
selection |
|||||
6
7
1 - DISPLAY
Clock display
With 4 digits, generally represents durations, hours, and info messages. It comprise 3 symbols representing operative conditions of times.
Pot symbol
If switched on, indicates a working cooking function, even if in manual mode. If flashing, it indicates the end of a temporized cooking. During delayed start period, it stays switched off, and then it switched on during effective cooking
Auto symbol
Normally it is switched off. If on indicates a temporized cooking is selected ( the oven is not in manual mode), and the pot symbol is on. If flashing together with the pot symbol, it indicates the end of a temporized cooking. During duration setting step, it flashes to distinguish from minute minder.
Bell symbol
Normally switched off. If is on indicates the minute minder active. If flashing indicates that the cooking operation is completed.
Cooking program display
It visually shows the selected heating elements in the cooking program.
The oven light is always on during cooking operations. During delayed cooking, it stay switched off to indicate that visually represented cooking is not working.
With the “Fan symbol”, in the case that cooking is of ventilated type, an animation is showed, composed of spades in fast succession rotating.
During delayed cooking animation is suspended
and 4 spades switched on are showed ( ventilation selected not working at the moment)
Temperature display
It shows the selected temperature and is equipped with both graphic symbol and progress bar to display a visual thermometer.
2.1The clock
will require setting when you first turn on the power (or following a power failure).
At the power on the timer shows the clock flashing and is increased by one unit every minute. The oven does not work and need to adjust the time.
2.2Setting the time
The clock setting is only allowed with the oven on stand-by.
Touch and hold button 6 more then 4 sec to set the correct time. Initially set the hours using buttons 4 and 5, and after waiting 4 sec you can set the minutes. The 6 button allows you to pass each other between the two settings.
8
2.3 Switching the oven ON / OFF
Touch and release the button 3, the timer display shows “On”
After two sec the oven light and the program display are on. If after one minute a cooking program is not activated, the oven light switches OFF and the oven goes in off position and the display shows “OFF”
During cooking, to turn off the oven, touch and release the button 3
If ”Children Care” function is selected, the button release must take place at least after 2 sec., to protect accidental shutdowns. If “Children Care” is not active, the release may be instantaneous.
Turning off the oven is actually two sec. after the appearance of the message “OFF”: if the button is pressed accidentally , simply press it again to “undo” the effect.
WARNING - IMPORTANT NOTE
Do not turn the oven off if you have set it for automatic or semi-automatic cooking. This operation will cancel the programmed cooking. Only the timer ( minute minder) operates in the “stand-by” condition.
CHILDLOCK SAFETY ( ON SOME MODELS )
To activate the Childlock option touch the “
” key and hold until the clock/programmer display shows “n--0” and then “On”.
Then the time of the day appears again. The temperature display shows “
”.
When the Childlock option has been selected it is only possible to show programmes.
In this setting it is not possible to change the oven cooking programme (cooking function, temperature) and the time selected for a semi-automatic or automatic cooking: if touching the relative keys “n--0” appears on the central display. If the oven is turned off (stand-by mode) it is
only possible to operate the timer. To deactivate the “Childlock” option touch the “
” key and hold until the clock/programmer display shows “n--0” and then “OFF”.
Then the time of the day appears again. On the temperature display the “
” symbol goes out.
IMPORTANT: If the oven has been switched OFF (stand-by mode) with the Childlock option selected it is possible to turn ON the oven only after having deactivated the Childlock.
3.1 Minute minder
This function does not interact with the loads, and is always available regardless the status of the oven. Pressing the button 6 the bell symbol is lighted.
Set the time with the buttons 4 and 5, up to a maximum of 180 minutes, after 4 sec. the information is accepted and the bell remains lit.
Pressing the button 6 after changing the value brings back to a timer clock mode, accepting the value you just changed.
When the time elapsed, a tone sounds combined with the symbol bell flashes. To end both signals simply press any button.
During minute minder setting step, it is possible to cancel the current value by pressing the button 3.
9
3.2 Manual cooking
Switch on the oven as per the paragraph 2.3. Select the oven function, the oven temperature is suggested by default, can be changed by pressing buttons 1 and 2
3.3 Automatic cooking modes (Based on setting the duration “DUR”)
Use automatic cooking to automatically turn the oven on, cook, and then turn the oven off.
1.Check the clock shows the correct time.
2.Select the function and temperature. The oven will come on.
3.Decide how long the food will take to cook.
4.Select “dur” (duration) on the clock/programmer display by using the “
” key and
then, with “90’”flashing on the central display, touch “
” or “
” keys to set the time in minutes (maximum 180 minutes - 3 hours). To reset the cooking time touch the
“
” key.
5. Decide the time you would like the oven to turn off; select “End” on the
clock/programmer display by |
using the “ ” key and then, with the time flashing on |
the central display, touch the “
” or “
” keys to set the end of cooking time
(touch “
” key to change between hours and minutes).
If there is time to wait before cooking starts, “A” will show in the clock /programmer display and the oven will switch off but is now set for automatic cooking.
If you are already at home to turn the oven on and only want the oven to turn off automatically, start cooking as normal, then follow step 4 or step 5 to set a time to stop the oven.
When automatic cooking starts, “ ” will be displayed and the oven will turn on.
–To see the remaining cook time, follow step 4 up to display “dur” (duration).
–To see the set stop time, follow step 5 up to display “End”.
–To cancel automatic or semi-automatic cooking at any time see chapter “CANCELLING A SET PROGRAMME”.
When the stop time is reached the timer will beep, “A” and “ ” will flash:
–Touch any key to stop the beeping.
–The oven will turn off on the “OVEN LIGHT” function.
–Turn OFF the oven as indicated in the “TURNING THE OVEN ON AND OFF” chapter.
Attention: after a power failure any automatic or semi-automatic programme is cancelled. Turn off the oven manually.
During an automatic or semi-automatic cooking programme it is possible to change the cooking function and the temperature at any time.
3.4 Based on setting a cook stop time
Turn the oven as indicated in the paragraph 2.3. Press the button “
” three times,,
the display shows “End”. Set with buttons “
” or “
”, the end of cooking time, falling in the next 23h59m.
Apply for input time the same procedures of the clock setting: you set the hours and then the minutes. After 4 sec from the last push of a button, the oven will operate until the specified cooking duration time.
Select a cooking function, the oven suggests a default temperature, the temperature can
be changed by using the buttons “
” or “
”,.
After the elapsed time, the oven enters in “Cooking end” mode
10
3.5 Fully automatic – (Start Later – Stop Later)
Turn the oven as indicated in the paragraph 2.3.
Select a cooking function, the oven suggests a default temperature, the temperature can be changed by using the buttons “
” or “
”,.
The function is a combination of the two function of duration and end, to be set separately, without the constraints of precedence ( first the duration and then the end or viceversa).
After 4 sec from the last push of a button, the oven will be in mode of delayed start: it will later operate automatically for the specified cooking duration and will stop at the set end cooking time.
After the elapsed time, the oven enters in “Cooking end” mode.
During the delayed start both the temperature and oven function are shown, and both are adjustable.
The temperature bar remains off to remember that cooking is not currently running. All loads are turned off until the cooking will take action.
3.6 End cooking mode
At the end of cooking time, the oven turns off all loads, it activates a triple beep intermittently;
The temperature and programs display are switched off. The timer display shows the time of the day and the two symbols Pot and Auto flash.
To unlock the oven, just press any button below the timer display: the acoustic signal ends, the oven is ready to receive new commands, you can select a new cooking
function, or turn it off permanently with the button 
.
3.7 Cancelling a set program
To cancel a set programme (“A” symbol activated on the programmer display):
– Select “dur” on the programmer display by touching the key “
” and then touch
“
” key.
– A set programme is also cancelled when the oven is switched OFF in the “stand-by” mode. At the next power up the oven is not programmed.
IMPORTANT: If the oven is ON, remember to switch it off manually otherwise it does not stop operating in the set mode.
11
Loading...