AEG-Electrolux F86080IM, F86080IA User Manual

0 (0)

FAVORIT 86080 i

User manual

Dishwasher

2

Dear Customer

Thank you for choosing one of our high quality products.

With this appliance you will experience the perfect combination of functional design and cutting edge technology.

Convince yourself that our appliances are engineered to deliver the best per formance and control indeed we are setting the highest standards of excel lence.

In addition to this you find environmental and energy saving aspects as an inte gral part of our products.

To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfect ly and most efficiently.

To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

The following symbols are used in this user manual:

1Important information concerning your personal safety and information on how to avoid damaging the appliance.

3General information and tips

2Environmental information

Contents

3

 

 

Contents

Operating Instructions

4

Safety

4

 

 

Diagram of appliance

5

 

 

Control panel

6

 

 

Prior to using for the first time

8

 

 

Setting the water softener

8

Adding special salt

10

Filling up with rinse aid

11

Activating/deactivating the acoustic signal

13

In daily use

14

 

 

Loading cutlery and dishes

14

Adjusting the height of the upper basket

19

Adding detergent

20

Using 3in1 detergents

21

Selecting the dishwashing cycle (Cycle Table)

22

Starting a dishwashing cycle

24

Setting the Delay Timer

25

Switching off the dishwasher

26

Care and cleaning

26

 

 

What to do if…

28

 

 

Remedying small malfunctions

28

If the dishwashing results are not satisfactory

30

Disposal

31

 

 

Technical data

32

 

 

Notes for Test Institutes

32

 

 

Installation and connection instructions

34

 

 

Safety information for the installation

34

 

 

Installing the dishwasher

34

 

 

Connecting the dishwasher

35

 

 

Guarantee/Customer Service

38

 

 

Service

44

 

 

4 Operating Instructions

Operating Instructions

1 Safety

Prior to using for the first time

• Follow the ”Instructions for installation and connection”.

Correct use

The dishwasher is only intended for washing domestic dishes.

Additions or modifications to the dishwasher are not permitted.

Use only special salt, detergent and rinse aid suitable for domestic dishwash ers.

Do not put any solvents in the dishwasher. This could cause an explosion.

Child safety

Keep packaging away from children. There is a risk of suffocation.

Children often do not recognise the hazards associated with electrical appli ances. Don’t allow children to use the dishwasher unsupervised.

Make sure that children and pets don’t climb into the dishwasher. Could en danger life!

Dishwasher detergents can cause chemical burns to the eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dish washer detergent manufacturer.

The water in the dishwasher is not for drinking. Risk of chemical burns.

General safety

Repairs to the dishwasher are only to be carried out by qualified service engi neers.

When the dishwasher is not being used, switch it off and shut off the water tap.

Never unplug the appliance by pulling on the cable. Always pull the plug.

Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.

Never sit or stand on the open door.

If the dishwasher is located in a room where there may be a frost, remove the connection hose from the tap after each use of the dishwasher.

Diagram of appliance

5

 

 

Diagram of appliance

Upper basket spray arm and floor spray arm

Dispenser

for special salt

Water hardness dial

Dispenser for detergent

Dispenser for rinse aid

Rating plate

Filters

Interior lighting

1This dishwasher has an internal light that turns on and off when the opening and closing of the dishwasher’s door occurs.

Internal light equipped with led lamp CLASS 1 in accordance with EN 60825 1: 1994 + A1:2002 + A2:2001

In case that this light has to be replaced, please contact your local Service Force Centre.

6 Control panel

Control panel

ON/OFF button

 

 

 

 

 

 

Programme buttons

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 2 3

Function buttons

The ON/OFF button is used to turn the dishwasher on and off.

The Programme buttons are used to select the desired dishwashing cycle.

Control panel

7

 

 

Function buttons: In addition to the pre set dishwashing cycle, the following functions can also be set using these buttons:

Function button 1

Sets the water softener

Function button 2

Activates/deactivates rinse aid inflow when 3in1 on

Function button 3

Activates/deactivates the acoustic signal

 

 

The rinse aid inflow is only affected, if the 3in1 function is selected.

Multi display

 

Programme progress display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set delay

Select

Control

timer

3 in1 function

indicators

The multi display can indicate:

the level of hardness to which the water softener is set.

whether the rinse aid inflow has been activated/deactivated.

whether the acoustic signal has been activated/deactivated.

the start delay that has been set.

the estimated time remaining for the current dishwashing cycle.

what type of error has occurred with the dishwasher.

Programme progress display: The current stage of the programme is always shown in the programme progress display.

The control indicators have the following meanings:

8 Control panel

1)

Refill with special salt

 

)

Refill with rinse aid

 

 

Turn on the tap

 

The upper basket spray arm is jammed

 

The door of the dishwasher is open

 

 

1) These control indicators are never illuminated while a dishwashing cycle is running.

Prior to using for the first time

9

 

 

Prior to using for the first time

3If you wish to use 3 in 1 detergent:

First read the section “Using 3in1 detergents”.

Do not fill up with special salt or rinse aid.

If you do not use 3in1 detergent, before using for the first time

1.Set the water softener

2.Fill up with special salt for water softeners

3.Fill up with rinse aid

Setting the water softener

The water softener must be set manually and electronically:

3To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a low lime content. The water softener must be set according to the table to the water hardness in the area where you live. Your local water company will be able to give you information about the water hardness in your area.

The dishwasher must be switched off.

Setting manually:

1. Open the dishwasher door.

2. Remove the lower basket from the dishwasher.

3.Turn water hardness dial on the left wall of the dishwasher interior to 1 or 2 (see table).

Setting electronically: 1. Press the ON/OFF button.

3If the only LED indicator illuminated is one that belongs to a programme button, this means that this dishwashing cycle has been activated. The dishwashing cy cle must be deselected:

Press function buttons 1 and 2 simultaneously for approx. 2 seconds.

The LED indicators of all the programme buttons that can be selected light up.

10Prior to using for the first time

2.Press function buttons 1 and 2 simultaneously and keep them pressed. The LED indicators for function buttons 1 to 3 will flash.

3.Press function button 1.

The LED indicator for function button 1 will flash. The multi display will indicate the hardness setting.

4.Pressing function button 1 increases the hardness setting by 1. (Exception: hardness setting 1 follows hardness setting 10).

5.When the hardness setting is correct, press the ON/OFF button. The hardness setting is now saved.

If the water softener is set electronically to “1”, this switches off the control in dicator for special salt.

 

 

Water hardness

 

Setting for

 

Number

 

 

 

water hardness

Indicator

 

 

 

 

 

 

of

 

 

 

 

 

 

 

 

on the multi

 

 

 

 

 

 

 

 

acoustic

in

 

in

 

 

 

 

display

 

 

Range

Manual

Electronic

signals1)

°d

2)

 

mmol/l

3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

51 70

 

9,0 12,5

 

 

10 4)

10L

10

43 50

 

7,6 8,9

 

 

9

9L

9

37 42

 

6,5 7,5

IV

 

8

8L

8

29 36

 

5,1 6,4

 

2*

7

7L

7

23 28

 

4,0 5,0

 

 

6

6L

6

19 22

 

3,3 3,9

III

 

5*

5L

5

15 18

 

2,6 3,2

 

4

4L

4

 

 

 

 

 

 

 

 

 

 

 

11 14

 

1,9 2,5

II

 

3

3L

3

4 10

 

0,7 1,8

I/II

1

2

2L

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

below 4

 

below 0.7

I

 

no salt

1L

1

 

 

 

 

 

 

 

required

 

 

 

 

 

 

 

 

 

 

 

 

1)The water hardness will only be indicated acoustically if the acoustic signal has been activated.

2)(°d) German degree, measure of the hardness of water

3)[mmol/l] millimol per litre, international unit for water hardness

4)On this setting the length of the dishwashing cycle may be slightly longer.

*) factory setting

Prior to using for the first time

11

 

 

Adding special salt

To decalcify the water softener, it must be filled up with special salt. Use only special salt suitable for domestic dishwashers.

If you do not use 3 in1 detergent, fill up with special salt:

Before using the dishwasher for the first time.

When the control indicator for special salt is illuminated on the control panel.

1. Open the door and remove the lower basket.

2. Screw open the lid on the salt dispenser by turning it anti clockwise.

3. Only when using the dishwasher for the first time:

Fill the salt dispenser with water.

4. Place the funnel (supplied) over the dis penser opening.

Fill the dispenser with special salt; the ca pacity of the dispenser is approx. 1.0 1.5 kg, depending on the size of the grains. Do not overfill the dispenser.

3If water overflows when filling up with special salt, this is completely harmless.

5.Clean away any salt remnants from the dispenser opening.

6.Screw the lid back on in a clockwise direction.

7.Run a dishwashing cycle after filling the salt dispenser with special salt.

This will wash away salt water and salt crystals that have been spilt.

3Depending on the size of the salt grains, it can take several hours for the salt to dissolve in the water and for the control indicator for special salt to go out.

12 Prior to using for the first time

Filling up with rinse aid

With rinse aid the rinsing water drains away better and so you get smear free, gleaming dishes and clear glasses.

If you do not use 3in1 detergent, fill up with rinse aid:

Before using the dishwasher for the first time.

When the control indicator for rinse aid is illuminated on the control panel.

Use only special rinse aid for dishwashers and no other liquid detergents.

1.Open the door.

The rinse aid compartment is located on the inside of the dishwasher door.

2. Press the release button on the rinse aid compartment.

3.Open the cover.

4.Pour rinse aid in slowly right up to the bro ken “max” line;

this corresponds to a volume of approx. 140 ml when full.

5. Press the lid shut until it clicks into place. 6. Wipe up any spilt rinse aid with a cloth.

Otherwise there will be too much foam when rinsing.

Prior to using for the first time

13

 

 

Setting the amount of rinse aid required

3Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfactory”.) The dosage can be set from 1 6. The dosage is pre set to “4” in the factory.

1.Open the dishwasher door.

2.Press the release button on the rinse aid

compartment.

3.Open the cover.

4.Set the dosage level.

5. Press the lid shut until it clicks into place. 6. If rinse aid has leaked out, wipe it away

with a cloth.

Activating rinse aid inflow when 3in1 function is selected

3If the 3in1 function is not selected, the rinse aid inflow is always activated.

If the 3in1 function is selected due to the use of 3in1 detergent, the rinse aid in flow is deactivated. If the dishes then do not dry sufficiently, you should re acti vate the rinse aid inflow (see also section “Using 3in1 detergents”).

1.Press the ON/OFF button.

3If the only LED indicator illuminated is one that belongs to a programme button, this means that this dishwashing cycle has been activated. The dishwashing cy cle must be deselected:

Press function buttons 1 and 2 simultaneously for approx. 2 seconds.

The LED indicators of all the programme buttons that can be selected light up.

2.Press function buttons 1 and 2 simultaneously and keep them pressed. The LED indicators for function buttons 1 to 3 will flash.

3.Press function button 2.

The LED indicator for function button 2 will flash. The multi display will indicate the current setting:

0d

Rinse aid inflow deactivated when 3in1 on (factory setting)

1d

Rinse aid inflow activated when 3in1 on

 

 

14Prior to using for the first time

4.Pressing function button 2 activates and deactivates the rinse aid dispensing function.

5.Once the multi display is indicating the required setting, press the ON/OFF but ton. The setting is now saved.

Activating/deactivating the acoustic signal

In addition to the optical display (e.g. indicating the end of the cycle, errors) you can also choose to set an acoustic signal.

1. Press the ON/OFF button.

3If the only LED indicator illuminated is one that belongs to a programme button, this means that this dishwashing cycle has been activated. The dishwashing cy cle must be deselected:

Press function buttons 1 and 2 simultaneously for approx. 2 seconds.

The LED indicators of all the programme buttons that can be selected light up.

2.Press function buttons 1 and 2 simultaneously and keep them pressed. The LED indicators for function buttons 1 to 3 will flash.

3.Press function button 3.

The LED indicator for function button 3 will flash.

The multi display will indicate the current setting:

0b

Acoustic signal deactivated

1b

Acoustic signal activated (factory setting)

 

 

4.Pressing function button 3 will change the setting.

5.Once the multi display is indicating the required setting, press the ON/OFF but ton. The setting is now saved.

In daily use 15

In daily use

Loading cutlery and dishes

1Sponges, cleaning cloths and any other objects that can absorb water must not be washed in the dishwasher. Plastic and Teflon coated dishes and pans tend to retain water droplets. These dishes and pans therefore do not dry as well as those made of china and stainless steel.

For washing in the dishwasher, the following cutlery/dishes/pots and pans

 

are not suitable:

are of limited suitability:

• Cutlery with wooden, horn, china or

• Only wash stoneware in the dishwasher if it is spe

 

mother of pearl handles

cifically marked by the manufacturer as being dish

washer safe.

Plastic items that are not heat re

• Glazed patterns may fade if washed very frequently

 

sistant

in the dishwasher.

Older cutlery with cement

• Silver and aluminium parts have a tendency to dis

 

that is sensitive to temperature

colour during washing. Food remains, e.g. egg white,

Dishes or cutlery with glued parts

egg yolk and mustard often cause discoloration and

Pewter or copper items

staining on silver. Therefore always clean food resi

Lead crystal glass

dues from silver immediately, if it is not to be

Steel items that rust

washed straight after use.

Wooden boards/platters

• Glass can become dull after a large number of wash

• Items made from synthetic materials

 

 

es.

 

 

 

Before loading the dishes, you should:

Remove the worst of the food residues.

Soak pans with burnt on food residues.

When loading the dishes and cutlery, please note:

Dishes and cutlery must not impede the rotation of the spray arms.

Load bowls, cups, glasses, pans, etc. with the opening downwards so that water cannot collect in them

Dishes and items of cutlery must not lie inside one another or cover one an other

To avoid damage to glasses, they must not touch one another

Don’t put small items (e.g. lids) in the baskets for the dishes, but in the cut lery basket, so that they can’t fall through the holes.

AEG-Electrolux F86080IM, F86080IA User Manual

16 In daily use

Loading cutlery

1Warning: Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery rack or in the upper basket to avoid the risk of injury.

To ensure that all items of cutlery in the cutlery basket can be reached by the water, you should:

1.Place the grid insert on the cutlery basket

2.Place forks and spoons in the cutlery basket's grid insert with their han dles pointing downwards.

For larger utensils, such as whisks, leave off one half of the cutlery grid.

The cutlery basket can be opened out. Always make sure that you put your hand around both parts of the two part handle when removing it from the dishwasher.

1. Place the cutlery basket on a table or work surface.

2. Open out the two part handle.

3. Remove cutlery.

Loading...
+ 36 hidden pages