Electric built-in oven
INSTRUCTION BOOKLET
Model EOB 6730
35690-4401 |
AU |
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
•This oven is heavy and care must be taken when moving it.
•Ensure that all packaging, both inside and outside the oven, has been removed before the oven is used.
•The oven must be installed according to the instructions supplied. Any electrical work must be undertaken by a qualified electrician.
•It is dangerous to alter the specifications in any way.
•After installation, please dispose of the packaging with due regard to safety and the environment.
Child Safety
•The appliance is not intended for use by young children or infirm persons without supervision. Young children must not be allowed to tamper with the controls or play near or with the oven.
•Ovens become very hot, and retain their heat for a long period of time after use. Children should be kept well away from the oven until it has cooled.
•CAUTION - accessible parts will become hot when in use. To avoid burns and scalds children should be kept away.
During Operation
•This oven has been designed for cooking edible foodstuffs only and must not be used any other purposes.
•Do not use this oven if it is in contact with water and never operate it with wet hands.
•Ensure that the oven shelves are installed in the correct way.
•Appliances become very hot with use, and retain their heat for long periods after use. Care should be taken to avoid touching heating elements inside the oven.
•Take great care when heating fats and oils as they will ignite if they become too hot.
•Never place plastic or any other material which may melt in or on the oven.
•Only clean this oven in accordance with the instructions.
•Take care to follow the recommendations given for tending the food when grilling. Use the handles provided in the recommended way.
•Always grill with the oven door closed.
•Always use oven gloves to remove and replace food in the oven.
•Ensure that you support the grill pan when removing it from the oven.
•Never line any part of the oven with aluminium foil.
•Do not allow heatproof cooking material, e.g. roasting bags, to come into contact with oven elements.
2
•Always stand back from the oven when opening the oven door, to allow any build-up of steam or heat to release.
•Stand clear when opening the drop down oven door.
•Do not allow it to fall open - support it using the door handle, until it is fully open.
•Do not place sealed cans or aerosols inside the oven. They may explode if they are heated.
•Do not hang towels or clothes from the oven or its handle. They are a safety hazard.
After Use
•Ensure that all control knobs are in the OFF position when not in use.
•For hygiene and safety reasons, this oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan.
•Only clean this oven in accordance with the instructions.
•Never use steam or high pressure steam cleaners to clean the appliance.
•Always allow the oven to cool down before switching off at the wall prior to carrying out any cleaning or maintenance work.
•Do not leave utensils containing foodstuffs, e.g. fat or oil in or on the oven in case it is inadvertently switched ON.
•Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
Environmental Information
•After installation, please dispose of the packaging with due regard to safety and the environment.
•Whendisposingofanoldappliance,makeitunusable, by cutting off the cable. Remove any door catches, to prevent small children being trapped inside.
The symbol 
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Contents
For the User |
|
For the Installer |
|
Important Safety Information |
2 |
Installation |
19 |
Description of the Oven |
4 |
Technical data |
19 |
Controls |
5 |
Electrical Connection |
20 |
Before the First Use |
6 |
Building In |
21 |
Electronic programmer |
7 |
|
|
Using the Oven |
9 |
|
|
Hints and Tips |
9 |
|
|
Using the Conventional Oven |
10 |
|
|
Using the Fan Oven |
11 |
|
|
Cooking chart-Conventional and Fan Oven |
12 |
|
|
Grilling |
13 |
|
|
Defrosting |
14 |
|
|
Cleaning the Oven |
15 |
|
|
Something not Working |
19 |
|
|
Guide to use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
Safety Instructions
!Step by step instructions for an operation 
Hints and Tips
Environmental information
This appliance complies with the following E.E.C.
Directives:
*73/23 - 90/683(Low VoltageDirective); *93/68(General Directives);
*89/336(ElectromagneticalCompatibilityDirective) and subsequent modifications.
Your safety is of paramount importance. Therefore, if you are unsure about any of the meanings of these WARNINGS, contact the Customer Care Department.
3
Description of the Oven
6 |
5 |
4 |
3 |
2 |
1
7
8
9
10
11
1. |
Control panel |
7. |
Air Vents for Cooling Fan |
2. |
Oven Control Function Knob |
8. |
Grill |
3. |
Electronic Programmer |
9. |
Oven Light |
4. |
Thermostat Control Knob |
10.Oven Fan |
|
5. |
Mains on Light |
11.Rating Plate |
|
6. |
Thermostat Control Light |
|
|
Oven accessories
Grill/roasting pan |
Grill trivet |
Anti-tip shelf (x 2) |
4
Controls
Oven Function Control Knob
0The oven is off.
Oven light - The oven light will be on without any cooking function.
Conventional cooking - The heat comes
from both the top and bottom element, ensuring even heating inside the oven.
Top heating element - The heat comes from the top element only (outer section).
Bottom heating element - The heat comes from the bottom of the oven only.
Inner grill element only - Can be used for
grilling |
small quantities. |
Full Grill - The full grill element will be on.
Thermal Grilling - This function offers an al-
ternative method of cooking food items, normally associated with conventional grilling. The grill element and the oven fan operate together, circulating hot air around the food.
When using the thermal grill cooking function, select a maximum temperature of 200°C.
Fan cooking - This allows you to roast or roast
and bake simoultaneously using any shelf, without flavour transference.
Defrost Setting - This setting is intended to assist in thawing of frozen food.
Mains on Light
The mains on light will come on when the oven function control knob is set.
Thermostat Control Knob
Turn the thermostat control knob clockwise to select temperatures between 50°C and 230°C (MAX).
Thermostat Control Light
The thermostat control light will come on when the thermostat control knob is turned. The light will remain on until the correct temperature is reached. It will then cycle on and off to show the temperature is being maintained.
5
The Safety Thermostat
This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Service Force Centre. Under no circumstances should you attempt to repair the appliance yourself.
The cooling fan
The cooling fan operates during cooking. Air is expelled through vents between the oven door and the control panel, as shown in the diagram.
The cooling fan may run on after the oven is switched off to keep the controls cool. This is quite normal.
Before the First Use
Before using the appliance, remove all packaging, both inside and outside the appliance, including the advertising labels and any protective film.
Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal.
Ensure the room is well ventilated.
The oven will work only if the time of day has been set (see the relevant instructions).
!1. Set the time of day with the electronic programmer (see chapter "Electronic Programmer").
2.Switch the oven function control knob to fan cooking 
.
3.Set the thermostat control knob to MAX.
4.Open a window for ventilation.
5.Allow the oven to run empty for approximately 45 minutes.
This procedure should be repeated with the full grill 
function for approximately 5-10 minutes.
To open the oven door, always catch the handle in its central part.
6
Electronic programmer
|
|
|
4 |
|
|
|
|
|
|||
5 |
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
||||
6 |
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
2 1 3
1.Push button for selecting a function 
2.Decreasing control button “ ”
3.Increasing control button “
”
4.Display
5.“Cooking Duration” pilot lamp
6.“End of cooking” pilot lamp 
7.“Minute minder” pilot lamp 
8.“Time of day” pilot lamp 
The oven will work only if the time of day has been set.
However, the oven can also be operated without any programme.
Setting the time of day 
When the power supply is switched on, or after a power failure, the “Time of day” pilot lamp 
will flash on the display.
To set the correct time of day:
1.Press button “
” or “ ”.
2.After the setting is carried out, wait for 5 seconds: the “Time of day” pilot
lamp 
will go out and the display will show the set time. The appliance is ready for use.
To reset the correct time of day:
1.Press button 
repeatedly to select the “Time of day” function. The relevant pilot lamp will start flashing. Then proceed as described above. The time of day can only be reset if no automatic function (cook duration 
or end of cooking 
) has been set.
“Cooking Duration” function 
This function allows the oven to automatically switch off at the end of a programmed cooking duration time. Place food in the oven, select a cooking function and adjust the cooking temperature. Press button
repeatedly to select the “Cooking Duration” function. The relevant pilot lamp
will start flashing. Then, proceed as follows:
To set the duration time:
1.Press button “
” or “ ”.
2.After the setting is carried out, wait for 5 seconds: the "Cooking Duration" pilot lamp
will come on and the display will revert to the time of day.
3.When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, while the pilot lamp will start flashing. Turn the oven function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE: turning the acoustic alarm off will reset the oven to manual, and if the oven function and the thermostat knobs are not set to zero the oven will start to heat again.
To cancel the duration time:
1.Press button 
repeatedly to select the “Cooking Duration” function. The relevant pilot lamp
will flash and the display will show the remaining cooking time.
2.Press button “ ” until the display shows “0:00”. After 5 seconds the pilot lamp will go out and the display will revert to the time of day.
7
“End of cooking” function 
With this function, you can set the oven to switch off automatically when a programmed end of cooking time is over. Placefood in the oven, select a cooking function and adjust the cooking temperature. Press button
repeatedly to select the “End of cooking” function. The relevant pilot lamp
will start flashing. Then, proceed as follows:
To set the End of cooking time:
1.Press button “
” or “ ”.
2.After the setting is carried out, wait for 5 seconds: the “End of cooking” pilot lamp 
will come on and the display will revert to the time of day.
3.When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, while the pilot lamp will start flashing. Turn the oven function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button. NOTE: turning the acoustic alarm off will reset the oven to manual, and if the oven function and the thermostat knobs are not set to zero the oven will start to heat again.
To cancel the End of cooking time:
1.Press button 
repeatedly to select the “End of cooking” function. The relevant pilot lamp 
will flash and the display will show the programmed End of cooking time.
2.Press button “ ” until the display shows the current time of day. The programmer will beep and the pilot lamp will go out.
“Cooking duration” 
and “End of cooking time” 
combined
The functions “Cooking duration” and “End of cooking time” can be used simultaneously to set the oven to switch on and off automatically at a later time.
1.With the “Cooking duration” function
(carry out the cooking duration setting as described in the relevant chapter) set the duration time. Then, press button 
: the display will show the programmed setting.
2.With the “End of cooking time” function 
(carry out the End of cooking setting as described in the relevant chapter) set the end of cooking time. The relevant pilot lamps will come on and the display will show the time of day. The oven will switch on and off according to the set programmes.
“Minute minder” function 
The minute minder alarm will sound at the end of a timed period, but THE OVEN WILL REMAIN ON, if it is in use.
To set the minute minder:
1.Press button
repeatedly to select the “Minute minder” function. The relevant pilot lamp 
will start flashing.
2.Then, press button “
” or “ ” (maximum: 2 hours, 30 minutes).
3.After the setting is carried out, wait for 5 seconds: the “Minute minder” pilot lamp 
will come on.
4.At the end of the timed period, the pilot lamp will start flashing and an acoustic alarm will be heard. To switch off the acoustic alarm, press any button.
To cancel the minute minder:
1.Press button
repeatedly to select the “Minute minder” function. The relevant pilot lamp 
will flash and the display will show the remaining time.
2.Press button “ ” until the display shows “0:00”. After 5 seconds the pilot lamp will go out and the display will revert to the time of day.
How to switch off the display
1.Press two or three programmer push buttons simoultaneously and keep them pressed for about 5 seconds. The display will switch off.
2.To switch on the display, press any button.
The display can be switched off only if no other functions have been set.
8
Loading...