AEG-Electrolux 88101K-MN User Manual

0 (0)

88101K-MN

User manual

Ceramic glass induction

 

hob

2 Contents

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating Instructions

2

Safety information

2

Description of the appliance

4

Operating the appliance

6

Tips on cooking and frying

12

Cleaning and care

14

What to do if ...

14

Disposal

16

Installation Instructions

17

Safety information

17

Service

19

Warranty

19

Subject to change without notice

Operating Instructions

Safety information

WARNING!

Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.

Correct use

This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.

Do not leave the appliance unattended during operation.

This appliance should be used only for normal domestic cooking and frying of food.

The appliance must not be used as a work surface or as a storage surface.

Additions or modifications to the appliance are not permitted.

Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

Small children must be kept away from the appliance.

Only let bigger children work on the appliance under supervision.

Safety information

3

 

 

To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.

General safety

The appliance may only be installed and connected by trained, registered service engineers.

Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.

In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply, to prevent the possibility of an electric shock.

Repairs to the appliance must only be carried out by trained registered service engineers.

Safety during use

Remove stickers and film from the glass ceramic.

There is the risk of burns from the appliance if used carelessly.

Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware.

Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

Switch the cooking zones off after each use.

Users with implanted pacemakers should keep their upper body at least 30 cm from induction cooking zones that are switched on.

Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and saucepan lids on the cooking surface, as they can get hot.

Safety when cleaning

For cleaning, the appliance must be switched off and cooled down.

For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning equipment is not permitted.

How to avoid damage to the appliance

The glass ceramic can be damaged by objects falling onto it.

The edge of the glass ceramic can be damaged by being knocked by the cookware.

Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface.

Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway.

Do not use the cooking zones with empty cookware or without cookware.

To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.

The ventilation gap of 5mm between the worktop and front of the unit underneath it must not be covered.

AEG-Electrolux 88101K-MN User Manual

4 Description of the appliance

Description of the appliance

Cooking surface layout

 

180

180/280

 

 

180

 

145

5 4

1Induction cooking zone 1850 W, with power function 2500 W

2Induction cooking zone 2400 W, with power function 3700 W

3Control panel

4Induction cooking zone 1400 W, with power function 1800 W

5Induction cooking zone 1850 W, with power function 2500 W

Control panel layout

 

 

 

 

1

 

2

 

 

 

3

 

 

 

 

 

4

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Lock

2Power function

3Heat setting selection

4Cooking zone indicators. Timer function

5Timer display

6Display

7Timer

8Stop+Go

9On/Off with indicator

Description of the appliance

5

 

 

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor fields which activate a desired function. Do not cover other sensor fields.

If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance switches itself off.

 

 

 

 

Sensor field

 

 

Function

 

 

 

 

On / Off

Switches appliance on and off

 

 

 

 

 

 

 

 

 

 

 

 

Increase settings

To increase Timer setting

 

 

 

 

 

 

 

 

 

 

 

 

Reduce settings

To reduce Timer setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Timer

Timer selection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lock

Locking/unlocking the control panel

 

 

 

 

 

 

 

 

 

 

 

 

Power

Switch the power function on and off

 

 

 

 

 

 

 

 

 

 

 

 

STOP+GO

To switch the Keep Warm setting on and off

 

 

 

 

 

 

 

 

 

 

 

 

Increase settings

To increase heat setting

 

 

 

 

 

 

 

 

 

 

 

 

Reduce settings

To reduce heat setting

Displays

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display

 

 

Description

 

 

 

 

 

 

 

 

The cooking zone is switched off

 

 

 

 

 

 

 

 

 

 

 

 

 

Keep Warm settings

 

Keep Warm / STOP+GO function is switched on

 

 

 

 

 

 

 

 

-

 

Heat settings

 

 

To set heat settings

 

 

 

 

 

 

-

 

Heating setting plus

 

Intermediate heat setting is set

 

 

 

 

 

decimal point

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Warm-up

 

 

The Auto Warm-up function is switched on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fault

 

 

Malfunction has occurred

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pan detection

 

 

Cookware is unsuitable or too small or no cookware

 

 

 

 

 

 

 

 

has been placed on the cooking zone

 

 

 

 

 

Residual heat

 

 

Cooking zone is still hot

 

 

 

 

 

 

 

 

 

 

 

 

 

Child safety device

 

Lock/Child safety device is set

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power

 

 

Power function is switched on

 

 

 

 

 

 

 

 

 

 

 

 

 

Automatic Switch off

 

Switch off is active

 

 

 

 

 

 

 

 

 

Residual heat indicator

WARNING!

Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indicator .

6 Operating the appliance

Residual heat can be used for melting and keeping food warm.

The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated by the residual heat of the cookware.

Operating the appliance

Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

 

 

Control panel

Display

Pilot light

Switch on

Touch

for 2 seconds

/

lights up

 

 

 

 

 

Switch off

Touch

for 1 second

/ none

goes out

 

 

 

 

 

After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.

Setting the heat setting

 

 

Control panel

 

Display

Increase

Touch

 

 

to

/

Decrease

Touch

 

 

to

 

Switch off

Touch

and

at the same time

 

 

 

 

 

 

 

 

The keep warm setting lies between and . It is used to keep food warm.

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. The automatic warmup function sets the cooking zone to the highest setting for a certain period of time and then automatically switches back to the cooking setting that was originally set.

Step

Control panel

 

Display

 

1.

Setting the maximum setting

/

 

 

2.

Place to one side for a moment

/

 

 

3.

Touch

 

 

 

 

 

 

 

 

4.

Touch in order to set the desired cooking setting

Until

/

after 3

 

 

seconds

 

 

 

 

 

 

 

If during the automatic warm up a higher heat setting is selected, e.g. from to , the automatic warm up is adjusted.

The length of time that the automatic warm up function operates depends on the heat setting selected.

 

 

 

Operating the appliance

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Length of the auto-

Intermediate heat set-

 

 

 

Heat setting

matic warm up

 

 

 

ting

 

 

 

 

[min:sec]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0:10

 

 

 

 

 

0:10

 

 

 

 

 

0:10

 

1:20

 

 

 

3:10

 

4:20

 

 

 

5:50

 

8:10

 

 

 

 

 

 

 

 

10:10

 

10:30

 

 

 

2:00

 

2

 

 

 

 

 

 

 

2:30

2:50

---

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.

 

Control panel

Display

 

 

 

Switch on

Touch

(for 5 seconds)

Switch off

Touch

previously set heat setting

 

 

 

When you switch the appliance off, the locking function is automatically switched off.

Turning the STOP+GO function on and off

The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode then back to the heat setting they were at before

 

Control panel

Display

 

 

 

To switch on

Touch

 

To switch off

Touch

Previous heat setting (not automatic warm-up or power

 

 

function)

 

 

 

STOP+GO does not stop timer functions.

STOP+GO controls the entire control panel apart from the sensor field .

Using the child safety device

The child safety device prevents unintentional use of the appliance.

8

Operating the appliance

 

 

 

 

 

 

 

Setting the child safety device

 

 

 

 

 

 

 

 

 

Step

 

Control panel

 

Display/Signal

 

1.

Switch on the appliance. Do not set a heat setting.

 

 

 

 

 

 

 

 

 

2.

Touch

until the signal sounds

 

Acoustic signal

 

 

 

 

 

 

 

3.

Touch

 

 

 

 

 

 

 

 

 

Appliance switches off. The child safety device is engaged.

Overriding the child safety device

The child safety device can be released in this way for a single cooking session; it remains activated afterwards.

Step

 

 

Control panel

Display/Signal

 

 

 

1.

Switch on the appliance

 

2.

Touch

and

at the same time

/ acoustic signal

 

 

 

 

 

Until the appliance is next switched off, it can used as normal.

Releasing the child safety device

Step

 

Control panel

Display/Signal

1.

Switch on the appliance

 

2.

Touch

until the signal sounds

Acoustic signal

3.

Touch

 

 

 

 

 

 

Appliance switches off. The child safety device is released.

Switching the power function on and off

The power function makes additional power available to the front induction cooking zones, e.g. to bring a large volume of water to the boil. The power function is activated for 8 minutes for the front left cooking zone and for 5 minutes for the front right cooking zone. After these times, the induction cooking zones automatically return to cooking level

.

 

Control panel

 

Display

 

 

 

 

Switch on

Touch

 

 

 

 

 

 

Switch off

Touch

 

 

 

Touch

 

 

 

 

 

 

If the power function has ended, the cooking zones automatically switch back to the heat setting set previously.

Loading...
+ 16 hidden pages