Size:
5.95 Mb
Download

®

User Guide

SoundPoint® IP 430 SIP 1.6

SIP 430 IP ®SoundPoint

GUIDE USER

Contents

Introduction ......................................................

1

Parts List ..........................................................

1

Installing SoundPoint® IP 430 SIP.........................

2

Connecting Network and Power Source......................................

2

Connecting the Handset and Optional Headset............................

3

Attaching the Base ...................................................................

3

Features ...........................................................

5

Key Descriptions ................................................

6

Using SoundPoint® IP 430 SIP..............................

7

Placing a Call..........................................................................

7

Answering a Call .....................................................................

8

Call Hold and Resume ..............................................................

8

Multiple Calls on Hold ..............................................................

8

Microphone Mute.....................................................................

8

General Key Use......................................................................

9

Local Conferencing...................................................................

9

Splitting a Conference ..............................................................

9

Transferring a Call..................................................................

10

Call Timer..............................................................................

10

Ending a Call ........................................................................

10

Redial...................................................................................

10

Call Forwarding.....................................................................

11

Volume Adjustment .................................................................

11

Do Not Disturb.......................................................................

11

Time and Date .......................................................................

12

Headset Memory Mode ..........................................................

12

Display Contrast.....................................................................

12

Ring Type ..............................................................................

13

Call Lists................................................................................

13

Contact Directory ...................................................................

13

Speed Dial ............................................................................

14

Multiple Lines.........................................................................

15

Multiple Keys per Line.............................................................

15

Multiple Call Appearances ......................................................

16

Shared Lines..........................................................................

17

Voice Mail ............................................................................

17

Distinctive Ringing / Call Treatment..........................................

18

Multilingual Support (Localization)............................................

18

Phone Reboot ........................................................................

19

Optional Features ............................................

19

Text Messaging ......................................................................

19

Presence / Status / Buddy Lists ................................................

20

Troubleshooting ...............................................

22

Safety and Compliance......................................

23

Part 15 Rules .........................................................................

23

Class B Digital Device or Peripheral..........................................

23

Modifications.........................................................................

24

Installation Instructions ............................................................

24

Plug Acts as Disconnect Device ................................................

24

Industry Canada (IC) ..............................................................

24

CE & VCCI Mark....................................................................

24

Polycom Limited Warranty

 

and Limitation Liability.....................................

24

Exclusions .....................................................

25

Warranty Exclusive...........................................

25

Service Agreements........................................

25

Limitations of Liability......................................

26

Disclaimer.......................................................

26

Governing Law ................................................

26

Copyright Notice ..............................................

26

Introduction

Thank you for choosing SoundPoint® IP 430 SIP, a full-duplex, hands-free phone running the industry standard Session Initiation Protocol (SIP). This unit provides business telephony features and functions such as Multiple Call Appearances, Call Hold, Transfer, and Conference over an IP network. In this User Guide, you will find everything you need to quickly use your new phone.

Be sure to verify with your system administrator that your network is prepared for configuring your SoundPoint® IP 430 SIP phone or consult the Administrator Guide SoundPoint® /SoundStation® IP SIP for more information. As well, be sure to read the Parts List, and the Safety Notices section in this guide before you set up the SoundPoint® IP 430 SIP phone.

Parts List

The following items are included in your SoundPoint® IP 430 SIP package. Check this list before installation to ensure that

Polycom SoundPoint® IP 430 SIP

Handset & Handset Cord

you have received each item. If you are missing any items, please contact your system administrator.

Power Adapter

(Not shown: Country-specific AC cord provided)

Phone Base

Network Cable

Quick Start Guide

Windowed Keycaps and

Blank Label Sheet

1

Installing SoundPoint® IP 430 SIP

This section provides basic installation instructions and information for obtaining the best performance with the SoundPoint® IP 430 SIP phone. If you require additional information or assistance with your new phone, please contact your system administrator.

The SoundPoint® IP 430 SIP User Guide includes regulatory compliance information that your system administrator should review and can also be found at www. polycom.com.

Connecting Network and Power Source

AC Power Option

Connect the supplied Network cable between the LAN jack on the phone and the LAN port on the wall or hub/switch device port. Connect the DC plug on the power adapter to the DC 24V jack marked on the phone. Connect the country-specifi c AC cord to the power adapter.

Network Port

Power Adapter

(24V DC)

Optional PC

Connection

In-Line Power Option

If the phone is connected to a compatible Ethernet switch that can provide in-line power, the phone will use that power option. Simply plug the supplied Network cable between the LAN jack on the phone and an available Power and Data port on the In-Line Power switch.

IEEE 802.3af compliant Power over Ethernet Hub/Switch (Terminal or Midspan)

Optional PC

Connection

2

Connecting the Handset and Optional Headset

1.Connect the short, straight end of the phone cord to the handset and the corresponding longer

straight end of the cord to the

(Optional)

handset jack on the back of the

 

phone.

 

2. Connect the headset (optional

 

accessory) to the headset jack

 

on the back of the phone.

 

For information on headsets, please visit www.polycom.com and choose the Support link.

Attaching the Base

The base unit can be attached to the SoundPoint® IP 430 in one of two ways:

Deskmount Method

1.Place all cords in the recessed area above the modular jacks as shown.

2.Align the two protrusions on the bracket with their corresponding holes in the phone and snap them together to lock the base to the phone.

3

Wallmount Method

1.Place all cords in the recessed area above the modular jacks as shown in previous example.

2.On the back of the phone, remove the key located behind the hookswitch. (See below.)

3.Reposition it so that the end tab (at 45º angle) is facing up. (See below.) This will ensure that the handset remains in place within the cradle in this position.

4.With mounting tab of the base unit facing up, fasten the base unit

to wall using wall anchors (not included). Snap the SoundPoint® IP 430 into place.

4

Features

Soft Keys

The screen will display labels for these keys, to identify their contextsensitive functions.

Speakerphone

Microphone Mute

Dial Pad

These 12 keys provide the 10 digits, alphabetic, and special

characters available in context sensitive applications.

Volume Adjustment Keys

Use these to adjust the volume of the handset, headset, speaker, and ringer.

Hookswitch

Speaker

For ringer and hands-free audio output.

Line Indicators Individual multi-color LEDs display a dynamic call state.

Line/Speed Dial Keys

Display Control Keys

Use the arrow keys to scroll through the displayed information.

Feature Keys

Access important features using these keys.

Hold

Headset

Indicator

This will alert you to new messages, and other events.

Graphic Display

Shows information about calls, messages, soft keys, time, date, and other relevant data.

Hands-free Microphone

This works best when the phone is placed on a hard, flat surface.

5

Key Descriptions

Feature Key

Description

 

Allows for hands-free communication during calls.

 

Mutes audio transmission locally during calls.

 

Allows users to place and receive calls through an optionally con-

 

nected headset.

 

Line or Speed Dial keys with LED indicators.

 

Dials last connected party from the phone.

Hold

Places current active call in Hold state.

 

Access Message Center and Instant Messages.

 

Access local and server features.

 

Select control for options and text within local menus.

 

Scrolling of lists and control of text/number entry on display.

 

Soft keys to select from various context-sensitive options.

 

Volume keys to adjusts audio and ringer volume.

Dial Pad

General dialing and alphanumeric entry (incl. special characters).

6

Using SoundPoint® IP 430 SIP

Placing a Call

Using the Handset:

1.To obtain dial tone, pick up the handset.

2.Dial the desired number. OR

Dial by SIP URL/IP address:

After obtaining dial tone, press Name

Enter URL or IP (press * for “.” and # or “@”)

Press Send to complete the call.

Using Hands-Free Speakerphone Mode:

1. With the handset on-hook, press any assigned line key, , or NewCall to obtain dial tone.

2.Dial the desired number. OR

Dial by SIP URL or IP addressas above.

Using the Headset:

1. With the optional headset connected, press any assigned line key, , or NewCall to obtain dial tone.

2.Dial the desired number. OR

Dial by SIP URL or IP addressas above.

Users also have the option to dial directly from the dial pad without first getting dial tone. Simply enter the number then lift the handset, press the Dial soft key, or press theorkeys.

In all cases, the active call will appear on the display showing call duration and destination.

During a call, users can alternate between handset, headset, or hands-free modes by pressing the or keys, or picking up the handset.

See also Headset Memory Mode.

†Examples: 10.3.0.42

To obtain the IP address of your phone, press

joe@205.173.1.24

Menu followed by Status, Platform and

sip: jane@polycom.com

Phone. The IP address is listed together with

 

other phone information.

7

Answering a Call

Using the Handset:

Pick up the handset.

Using Hands-Free Speakerphone Mode:

 

 

Press

, or with the handset on hook press the

Incoming calls may

be ignored

line key with the active indicator, or the Answr

by pressing the Reject soft key or

soft key.

 

invoking Do Not Disturb during

 

ringing. Note that Do Not Dis-

 

 

Using the Headset:

turb stays active when the call is

dropped and will remain so until

Press

to answer the call through an

toggled off.

optionally connected headset.

 

 

 

 

In all cases, the active call will appear on the

 

 

display showing call duration and destination.

 

 

Call Hold and Resume

During a call, press Hold or the Hold soft key. The call will be placed on hold and this will be indicated on the display. Press the Resume soft key, or the line key to retrieve the call.

Multiple Calls on Hold

If multiple calls are on hold on a single line key, use the arrow keys to switch between the calls then press the Resume soft key to retrieve the desired call. If more than two calls are on hold on a single key, an indication will appear on the display, for example “2/3” shows that this is the

Microphone Mute

During a call, press . The LED on the phone lights up and a flashing microphone on the display indicates that the other party (parties) cannot hear you.

To turn off Microphone Mute, press again.

second call out of three calls.

If calls are on hold on more than one line key, the details of the calls on any line key can be viewed by pressing that line key and holding it down for a few seconds. If a line key is pressed briefly, the first call on hold on that line key will be retrieved.

Microphone Mute applies to all modes: handset, headset, and hands-free. You can still hear all other parties while Mute is enabled.

8

General Key Use

To navigate through menus and to enter data, these are useful tips:

1. Use and to scroll through lists. In some lists the and keys can be used as “Page Up” and “Page Down”.

2.When menus have submenus, use and to move one level down or one level back up.

3. The Menu key can be pressed to quickly exit from any menu.

4.To enter text using the dial pad, press the number keys one or more times For example, for ‘A’ press ‘2’ and

for ‘C’ press ‘222’. When in text entry mode the display title will show whether keys will generate numbers (1), upper-case (A) or lower-case (a) characters and the 1/A/a soft key can change this.

Local Conferencing

A conference may be created with two other parties using the phone’s local conferencing feature.

1.Place a call to the first party.

2.Press the Cnfrnc soft key to create a new call (the active call is placed on hold).

3.Dial the phone number of the second party or use the arrow keys to access speed dial numbers, missed, placed and received call lists. From one of these lists press the Dial soft key.

Ending the call on the conference originator’s phone will terminate the conference.

4.When the second party answers, press the Cnfrnc soft key again to join all parties in the conference, or press the Split soft key to put the first call on hold and keep the second call as the active call.

A conference may be created at any time between an active call and a call which is on hold (on the same line or another line) by pressing the Join soft key.

Splitting a Conference

When a conference has been established, a Split soft key is available. Pressing this key will split the conference into two calls on hold.

9

Transferring a Call

1.During a call, press the Trnsfr soft key (the active call is placed on hold).

2.Dial the number to which you want to transfer the call.

OR

Transfer may be cancelled during establishment by pressing the Cancel soft key. The original call is resumed.

Use the arrow keys to access speed dial numbers, missed, placed, and received call lists. From one of these lists, press the Dial soft key.

3.Press the Trnsfr soft key again to complete the transfer. This can be done as soon as the ringback sound is heard or you can wait until the third party answers and talk to them before completing the transfer.

A blind transfer (without consultation) can also be supported by pressing the Blind soft key.

Call Timer

Call duration on an active call is monitored through a local call timer. This is visible within the active call window on the display.

Ending a Call

Press the EndCall soft key. OR

Replace the handset, or press if in Hands-free Mode, or if in Headset Mode.

Redial

Press Redial to dial the last call placed

from your phone.

To redial another previously dialed number, press from the phone’s idle display, and pressagain to place the call.

OR

 

Press

Menu and select Features, Call

Lists, Placed Calls to access the list.

10

Call Forwarding

Calls may be Forwarded (Diverted) to

To turn call forwarding off:

another extension as follows:

1. Press the Fwd soft key from the

 

 

 

1.

Press the Fwd soft key from the

phone’s idle display or press

 

phone’s idle display or press

Menu and select Features and

 

Menu and select Features and

Forward.

 

Forward at any time.

2. (Optional) If multiple lines are in

2.

(Optional) If multiple lines are in

use, select which line to disable.

 

use, select which line to forward.

3. Press the Disabl soft key.

3.

Enter a number or URL to forward

The line indicator now displays the regular

 

all future calls to.

 

icon.

4.

Press the Enable soft key to confirm

 

 

Call Forwarding.

Call forwarding is not available on shared

A moving arrow replaces the usual indica-

lines.

 

tor for that line to confirm Call Forwarding

 

enabled.

 

 

 

 

 

Volume Adjustment

 

To conform to regulatory requirements, hand-

Press the volume keys to adjust handset,

set and headset volume will return to a preset

headset, and hands-free speaker volume

level after each call. Hands-free volume

during a call. Pressing these keys in idle

settings will be maintained across calls.

state adjusts the ringer volume.

 

Do Not Disturb

To prevent the phone from ringing on incoming calls, press Menu and select

Features, Do Not Disturb. A flashing icon and text on the display indicates that Do Not Disturb is on.

Calls received while Do Not Disturb is enabled are logged in the Missed Calls list.

To turn off Do Not Disturb, press

Menu and select Features, and then

deselect Do Not Disturb.

(Optional) If multiple lines are in use, Do Not Disturb can be set on a line-by-line basis. Contact your system administrator for further details. When Do Not Disturb is enabled for a particular line, this is indicated by a flashing “ X ” beside the line

indicator on the display.

11

Time and Date

Time and Date is clearly displayed on the SoundPoint® IP 430 SIP phone. If the phone cannot obtain a time and date from the server, the display will flash. Contact your system administrator if either time or date is incorrect. Users have control over the format of the display and can turn it off. Select options which are right for you as follows:

Headset Memory Mode

As an option, the headset can be permanently enabled. This is especially useful for regular headset users. To do this:

1. Press

Menu .

2.Select Settings followed by Basic, Preferences, Headset Memory.

3.Use the up or down arrows and Select soft key to enable Headset Memory Mode.

4. Press Menu to return to the main menu.

Display Contrast

To adjust the contrast on the display to a comfortable level:

1. Press Menu . Select Settings followed by Basic, Contrast.

2.Pressing the Up or Down soft keys or volume keys will increase or decrease the display contrast.

1. Press Menu .

2.Select Settings followed by Basic, Preferences, Time & Date.

3.Select from Clock Date, Clock Time, Clock Order or Enable / Disable.

4.Scroll through the options via the up

and down arrow keys.

5. Press Select to confirm and Menu to return directly to the idle display.

Subsequent calls to or from this phone using the headset will cause the headset key to flash. Pressing the line keys or the Answr soft key to receive a call will now connect to the user’s headset automatically.

Repeat steps 1-3 and select Disabled to turn Headset Memory Mode off.

3.Press the Ok or Cancel soft keys to accept or reject changes.

4. Press Menu or the Exit soft key to return to the idle display.

12

Ring Type

Many ring types are available including a “Silent Ring”. Users can select different rings to distinguish between lines or to have a different ring from their neighbor’s phone.

To change the incoming ring:

1. Press

Menu .

Select Settings fol-

lowed by Basic,

Ring Type.

2.(Optional) If multiple lines are used, first select which line to change.

3.Using the arrow keys, highlight the desired ring type. Press the Play soft key to hear the selected ring type.

If “Silent Ring” is selected, incoming calls can only be answered by pressing the Answer soft key.

4.Press Select to change to the selected ring type.

5. Press Menu or the Exit soft key to return to the idle display.

See also Distinctive Ringing / Call Treatment.

Call Lists

A local list of calls missed, received, and placed is maintained by the phone (up to

100 for each).

Press Menu followed by Features, Call Lists and Missed, Received, or Placed Calls as desired. Call information will be displayed. From this screen:

1.Choose Edit to amend the dial string before dialing.

2.Choose Dial to return the call.

3.Choose Exit to return to the previous menu.

For additional choices, press More followed by:

4.Info to view information about the call.

5.Save to store the contact to the Contact Directory.

6.Clear to delete the call from the list.

Press More and Exit soft keys to return to the idle display.

To quickly view respective call lists from the idle display:

Pressfor Placed Calls. Pressfor Received Calls. Pressfor Missed Calls.

Contact Directory

In addition to a directory of missed, placed, or received calls, the phone can store a local directory of 500 or more contacts*.

Users can add, delete, edit, dial, or search for any contact in this list through just a few key strokes.

*Limit depends on server configuration. Contact your system administrator for full details.

13

To add or edit a contact:

1. Press Menu and select Features, Contact Directory.

2.Press More and then Add to enter another contact into the phone’s database or highlight an existing entry then press Edit.

3.Enter first and/or last name from the keypad. Press the 1/A/a soft key to select between numeric and upper/lower case alphanumeric modes. Press More and then Encode to access special characters in other languages if necessary.

4.Enter the Contact number. This is a required field and it must be unique

(not already in the directory).

The Speed Dial Index will automatically be assigned the next available index value.

To search for a particular contact:

1.Press More and then Search from the

Contact Directory menu.

2.Using the dial pad, enter the first few characters for First or Last names.

5.Ring Type and Divert Contact may be left blank.

6.Use and to switch between Enabled and Disabled settings for the last four fields.

7.Press Save to confirm or Cancel to abandon the changes then press

Menu or the Exit soft keys to return to the idle display.

Contacts can be easily added from Call Lists. See Call Lists for more

information.

3.Press Search to search for contacts.

4.Successful matches can be dialed from the resulting screen.

Speed Dial

Pre-assigned numbers can be associated with speed dial entries for rapid automated dialing. If a line key is unassigned to a line, it can act as a speed dial key for the first speed dial entry. When a new entry is

added to the Contact List, it is automatically assigned the next available speed dial index.

Example: To change a Speed Dial key assignment:

1. Press Menu and select Features, Contact Directory. Highlight an existing directory entry and press

Edit,

OR press and hold the line key which already has a speed dial number assigned to it. That contact in the directory will automatically be displayed.

2.If a speed dial index already exists,

delete it by pressing the key and then the << softkey.

3.If desired, enter a new speed dial index.

4.Press Save to confirm or Cancel to abandon the change then press Exit to return to the idle display.

14

Idle display could now be as shown:

To dial a number assigned to a Line Key, simply press the line key directly opposite the number on the display.

To quickly view a complete list of assigned speed dial entries, press from the idle display. Dial directly from a selected number.

Multiple Lines

SoundPoint® IP 430 SIP can support up to two lines. Lines can be configured for private or shared lines.

Typically, the top-most line key is reserved for the principle directory number of the phone. Depending on how your phone is configured, the display could resemble one of the displays shown:

Multiple Keys Per Line

A line on the phone can be configured to have both line keys associated with it. If this is the case, the display could look like this:

Incoming calls to this line will be distributed evenly among the two available keys. Similarly, outgoing calls will be distributed.

15

Multiple Call Appearances

Each line on the phone can be configured to have one or more call appearances. More than one call appearance is useful if there is an active call and an incoming call arrives on the same line. In the example shown, extension 2020 is in an outbound call with 2024. The second diagram shows an incoming call from John Brown. To answer this incoming call, put the original call on Hold or press the key to access the new call. Soft key labels will be updated on the display with these options:

1.Answr the incoming call.

2.Reject the incoming call.

3.Forward the incoming call to another extension.

Answering the incoming call places the original call on Hold and refreshes the soft key labels as indicated (third illustration). If more than one call appearance is in use, one will appear on the display and the total number will be indicated by a counter at the top right corner of the display.

For example “2/3” indicates that the highlighted call is the second one out of a total of three.

In the example case illustrated, another outbound call can be placed on the same first line. Press Hold during the first call and press NewCall to obtain dial tone and a new call appearance for a second call.

16

Shared Lines

The phone supports shared lines**. A shared line is indicated by a different line icon. In the diagram, the first line is private and the second line is shared. If two phones share a line, an incoming call to that number will cause both phones to ring. The call can be answered on either phone but not both.

If a shared line is in use on one of the phones, it cannot be used on the other one. The shared line icon changes to a moving icon and the line LED turns red when the line is in use remotely.

Calls on shared lines can be transferred, put on hold, or added to a conference.

**Shared lines are an optional feature configured on the server and may not be supported on your particular system. Contact your system administrator to find out.

Voice Mail

Received messages will be indicated by a flashing Message Waiting Indicator LED on the front of the phone and optionally a visual notification on the display.

Individual line indicators reflect voice or text messages left on that line (useful if multiple lines are in use).

To listen to voice messages:

1.Press and select Message Center*†.

2.(Optional) If multiple lines are in use, select from which line messages are to be retrieved.

3.Display indicates number of messages and their importance. Press

A stutter dial tone in place of normal dial tone is used to indicate that one or more voice messages are waiting at the message center.

Connct to initiate Voice Mail retrieval from the Message Center,

OR

Press Clear to turn off the flashing LED without listening to messages.

4.Follow voice prompts to listen to messages.

*Voice Mail is an optional feature configured on the server and may not be supported on your particular system. Contact your system administrator to find out.

Screen options may vary with servedbased application.

17

Distinctive Ringing / Call Treatment

Users can set distinctive incoming ringing tones for contacts in their local directory. This allows identification of a contact by a specific ring tone.

To set a distinctive ring for a local contact:

1. Press Menu then Features, and select Contact Directory.

2.Using the arrow keys, scroll through the directory to choose a contact.

3.Press Edit and scroll down to Ring Type.

4.Enter a number corresponding to one of the ring types available (press key and then << to remove an

existing value). See Ring Type in this guide for further details.

5. Press the Save soft key or Cancel to abandon the change then Menu press to return to the idle display.

Incoming calls from this contact will now have a distinctive ringing pattern.

This feature is local to the phone, and may be over-ridden by server settings. Contact your system administrator for more details.

Multilingual Support (Localization)

Many languages are supported by the phone.

To change language:

 

 

 

1.

Press

Menu

and select Settings,

3.

The display will change to the lan-

 

Basic, Preferences, Language.

 

guage of your choice.

2.

Scroll through the list of available

4.

Exit to the idle display by pressing

 

languages and press the Select soft

 

Menu .

 

key when the desired language is

 

 

 

highlighted.

 

 

 

18

Phone Reboot

Periodically, the phone may require a user reboot. Reasons for this include accepting a new configuration or new software.

There are two ways to reboot the phone:

Simultaneously press and hold the Messages, Hold, and Volume keys (see illustration) for more than 3 seconds or until a beep is heard.

Press Menu and select Settings, Advanced, Restart Phone (the user password is required to access this menu).

The reboot process will begin and is complete when the idle display is shown.

In the case of problems, it may be possible to restore normal operation of your phone without rebooting. Contact your system administrator before attempting to reboot the phone.

Optional Features

Text Messaging

Users can send and receive Text messages on the phone. SIP Instant (Text) Messaging is supported in real-time. Received messages will be indicated by a flashing

To read text messages:

1. Press

and select Instant

Messages,

 

OR

 

Press the IM soft key to read a message just received.

2.(Optional) If multiple lines are in use, select from which line messages

Message Waiting Indicator LED on the front of the phone and optionally a visual notification on the display.

are to be retrieved.

3.Messages appear first to last in sent order.

4.Press the Next or Prev soft keys to cycle through messages in order.

5.Press the More soft key to access the

Delete, Reply and New options.

19

To send a text message:

1.Press .

2.Select Instant Messages.

3.(Optional) If multiple lines are in use, first select from which line to send a message.

4.Press the New soft key.

5.Enter the desired extension or SIP URL. Press the 1/A/a soft key to alternate between numeric and upper/lower case alphanumeric modes.

6.Press the Select soft key to choose from various pre-scripted short messages,

OR

Press Edit to compose a custom message. Use dial pad keys to cycle through the character set. Use keys 1,*,0, and # to select special characters.

7.Press Send when finished.

Presence / Status / Buddy Lists

The phone combines interactive message services and status monitoring to complement a traditional messaging application such as email.

Live interaction within a pool of phones is possible by monitoring the “presence” of the parties involved.

Each phone can “watch” the status of up to eight other phones. These other phones form the “Buddy List”. The status of buddies is displayed and updated in real time. Each phone can also be “watched” by up to eight other phones.

To add or delete a contact from your buddy list, or block a contact:

1. Press Menu and select Features, Contact Directory.

2.Using the arrow keys, scroll through the directory to choose a contact.

3.Press Edit and scroll down to the

Watch Buddy or Block Buddy fields.

4.Press to switch between Enabled or Disabled status.

5.Press the Save soft key or Cancel to abandon the change then press

Menu to return to the idle display.

The diagrams show a typical Buddy Status screen display of monitored phones and a My Status display.

20

To view and change Presence settings:

1. Press

Menu

and select Features

and Presence.

 

2.Choose My Status to change your own status (online, busy, etc.). This affects information sent to watching phones. Presence information will also be sent to watching phones when the user goes off-hook or invokes Do Not Disturb. The My Status display can also be accessed by pressing the Stats soft key from the idle display.

3.Choose Buddy Status to monitor

the status of the contacts within your buddy list. This can also be accessed by pressing the Buddies soft key on the idle display.

4.Choose Watcher List to see which phones are currently monitoring your status. Press the Block soft key to block a watcher.

5.Choose Blocked List to see which phones you have blocked from monitoring your status. Press the Unblk soft key to unblock a contact.

The software running on the phone is compatible with Windows™ and MSN Messenger™ for peer-to-peer presence and instant messaging.

21

Troubleshooting

No Dial-Tone

Verify power is correctly applied to the SoundPoint® IP 430 SIP phone:

Check that the display is illuminated.

Make sure the LAN cable is inserted properly at the rear of the phone (try unplugging and re-inserting the cable).

If using inline powering, check that the switch is supplying power to the phone (contact your System Administrator).

Verify if dial tone is present on any other audio paths:

Switch between handset, headset (if present) or hands-free to see if dial tone is present on these other paths.

If dial tone exists on one of these, connect a different handset or headset to isolate the problem.

No Display, Incorrect Display, or Bad Contrast

Verify power is correctly applied to the SoundPoint® IP 430 SIP phone:

As “No Dial-Tone” above. Verify contrast adjustment:

Follow the instructions in this User Guide to readjust the contrast to a darker level.

Reboot the phone to obtain a default level of contrast (follow the instructions in this User Guide).

No Ringing

Verify successful outbound or inbound calling:

Place a call to the phone under investigation - check that the display indicates incoming call information.

Lift the handset. Ensure dial tone is present and place a call to another extension or number, check that the display changes in response.

Verify incoming ring setting and volume levels:

Adjust the ringing level from the front panel using the volume up/ down keys.

Check that ring type selection is not Silent Ring.

No Audio on Headset

Verify correct connections:

Ensure the headset is plugged into the jack marked Headset at the rear of the phone.

Ensure the headset amplifier (if pres-

Verify successful outbound or inbound calling:

As “No Display” above.

Check same status of handset, headset (if connected) and through the hands-free speakerphone.

ent) is turned on and/or the volume is correctly adjusted.

Ensure that headset is compatible with the phone.

22

No Response from Feature Key Presses

Verify phone is in active state:

Make a call to the phone to check for inbound call display and ringing as normal. If successful, try to press feature keys within the call to access Directory or Buddy Status for example.

Display shows “Network Link is Down”

Verify LAN cable is properly connected:

Check termination at the switch or hub (furthest end of the cable from the phone).

Check that the switch or hub is operational (flashing link/status lights) or contact your System Administrator.

• Press Menu followed by Status, Network and Ethernet. Scroll down to verify LAN port is Active.

Reboot the phone to attempt reconnection to the network.

Safety and Compliance

Part 15 Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interferences received, including interference that may cause undesired operation.

Class B Digital Device or Peripheral

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2.Increase the separation between the equipment and receiver.

3.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4.Consult the dealer or an experience radio/TV technician for help.

23

Modifications

In accordance with Part 15 of the FCC Rules, the user is cautioned that any changes or modi

by Polycom, Inc. could void the user’s authority to operate the equipment.

Installation Instructions

Installation must be performed in accordance with all relevant national wiring rules.

L’Installation doit être exécutée conformément à tous les règlements nationaux applicable au lage électrique.

Plugs Acts as Disconnect Device

The socket outlet to which this apparatus is connected must be installed near the equipment and must always be readily accessible.

La prise électrique à laquelle l’appareil est branché doit être installée près de l’équipement et doit toujours être facilement accessible.

Industry Canada (IC)

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CE and VCCI Mark

This SoundPoint® IP 430 SIP has been marked with the CE mark. This mark indicates compliance with EEC directories 89/336/EEC and 73/23/EEC.

A full copy of the Declaration of Conformity can be obtained from Polycom Ltd., 270 Bath Road, Slough, Berkshire, SL1 4DX, UK.

.

24

ADTRAN Limited Warranty and Limitation

Liability

LIMITED WARRANTY. ADTRAN, Inc. warrants this product against defects and malfunctions during a one (1) year period from the date of original purchase. If there is a defect or malfunction, ADTRAN, Inc. shall, at its option, and as the exclusive remedy, either repair or replace the telephone set at no charge, if returned within the warranty period. If replacement parts are used in making repairs, these parts may be refurbished, or may contain refurbished materials. If it is necessary to replace the telephone set, it may be replaced with a refurbished telephone of

the same design and color. If it should become necessary to repair or replace a defective or malfunctioning telephone set under this warranty, the provisions of this warranty shall apply to the repaired or replaced telephone set until the expiration of ninety (90) days from the date of pick up, or the date of shipment to you, of the repaired or replacement set, or until the end of the original warranty period, whichever is later. Proof of the original purchase date is to be provided with all telephone sets returned for warranty repairs.

Exclusions

ADTRAN, Inc. does not warrant its telephone sets to be compatible with the equipment of any particular telephone company or PBX manufacturer. This warranty does not extend to damage to products resulting from improper installation or operation, alteration, accident, neglect, abuse, misuse, fire, or natural causes such as storms or floods, after the telephone is in your possession.

ADTRAN, Inc. shall not be liable for any incidental or consequential damages, including, but not limited to, loss, damage, or expense directly or indirectly arising from the customers use of or inability to

use this telephone, either separately or in combination with other equipment. This paragraph, however, shall not apply to consequential damages for injury to the person in the case of telephones used or bought for use primarily for personal, family, or household purposes.

This warranty sets forth the entire liability and obligations of ADTRAN, Inc. with respect to breach of warranty, and the warranties set forth or limited herein are the sole warranties and are in lieu of all other warranties, expressed or implied, including warranties or fitness for particular purpose and merchantability.

Warranty Repair Services

Your ADTRAN certified representative is responsible for handling Warranty and Repair issues. ADTRAN will repair and return this product within the warranty period if it does not meet its published specifications or fails while in service. Additional warranty and repair information should be acquired from your ADTRAN certified representative or

authorized dealer. Should the set fail during the warranty period, repairs to this product may be made only by the manufacturer and its authorized agents, or by others who are legally authorized. This restriction applies during and after the warranty period. Unauthorized repair will void the warranty.

25

Repair and Return

If you determine that a repair is needed, please contact your ADTRAN certified

Service Agreements

Please contact your ADTRAN authorized dealer for information about service

Limitation Of Liability

LIMITATION OF LIABILITY. TO THE FULL EXTENT ALLOWED BY LAW, ADTRAN EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE,

Disclaimer

Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their

Governing Law

This Limited Warranty and Limitation of Liability shall be governed by the laws of the State of Alabama, U.S.A., and by the laws of the United States, excluding their conflicts of laws principles. The United Nations Convention on Contracts for the

representative. They will assist you in the repair and return process.

agreements applicable to your product.

USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF ADTRAN OR ITS AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT ADTRAN'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

application to you. When the implied warranties are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights which may vary depending on local law.

International Sale of Goods is hereby excluded in its entirety from application to this Limited Warranty and Limitation of Liability. All rights reserved under International and Pan-American Copyright Conventions. No part of the

26

contents of this manual may be copied, reproduced, or transmitted in any form or by any means, or translated into another language or format, in whole or part, without written consent from ADTRAN, Inc. Do not remove (or allow anybody else to remove) any product identification,

copyright or other notices. ADTRAN and the ADTRAN logo are registered trademarks of ADTRAN, Inc. All other trademarks and registered trademarks mentioned in this publication are the property of their respective owners.

27

®

ADTRAN, Inc.

901 Explorer Blvd.

Huntsville, AL 35806

©2005 Polycom, Inc. All Rights Reserved. Polycom®, SoundPoint®, and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S. and various countries. All other trademarks are the property of their respective companies.

61200777L1-31A