Adams Rite MS-1892-4025-628, MS-1892-4016-628, MS-1892-4016-335, MS-1892-4016-313, MS-1892-4015-628 Specsheet

...
0 (0)
Adams Rite MS-1892-4025-628, MS-1892-4016-628, MS-1892-4016-335, MS-1892-4016-313, MS-1892-4015-628 Specsheet

 

DEADLOCKS

MS+1890 SERIES MS® DEADLOCK/DEADLATCH

DL-21

 

 

 

 

MS+1890 Series MS®

Deadlock/Deadlatch

ALUMINUM

GRADE 1

 

E82101

The MS+1890 Deadlock/Latch provides a maximum security deadlock for after hour and traffic control convenience during business hours.

Function

Maximum Security deadlock after hours, plus traffic control convenience for management during the business day. Typical installation is a bank or store requiring three modes of door control: 1. Both lock and latch bolts retracted for unrestricted entry and exit during business hours, 2. Handle-operated latch for exit-only traffic just after closing and 3. Maximum Security hookbolt for overnight lockup. NOTE: Handle or paddle operates latchbolt only.

Operation

360° turn of key or thumbturn throws or retracts the hook-shaped deadlock. 120° further turn retracts latch bolt as well. Cylinder may be any make standard 1-5/32" diameter mortise type with MS® dimensioned cam (see CYLINDERS). Handle retracts spring-loaded latchbolt only.

4505 ARMORED STRIKE

Specifications

CYLINDER BACKSET

31/32", 1-1/8", or 1-1/2".

CASE

Steel with corrosion-resistant plating, measures 1" x 7-3/8" x depth. Depth varies by backset (see table on back of page).

LATCHBOLT

Zinc alloy with Delrin face for smooth, quiet action, measures 5/8" x 5/8" with 7/16" throw. Handing easily reversible. Bolt can be held fully retracted to allow door to be free swinging (see illustration on back of page).

LOCKBOLT

5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type “super” hacksaws, while hook shape repels pry bar attempts to “spread” the door from its jamb or lift it off its track.

ARMORED STRIKE

Satin stainless steel trimplate with steel mounting plate and dust box. Flat strike furnished. Also available for pairs of doors in radius shape, or flat with square corners for ANSI hollow metal jambs. Flat strikes also available with longer lip. MS+1890 Deadlock/Latch cannot be used with electric strikes.

CYLINDER CAM

MS+1890 Series locks are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring information.

“Dim A” .800" ± .005"

20.3mm ± .127mm

.120"3.0mm R

 

 

 

 

 

 

 

 

.182"

 

 

 

 

 

 

 

4.6mm

 

 

 

 

 

 

 

OPTIONS

Order handle/paddle for one side only or both sides. Handles/paddles on both sides solve, with minimum traffic impediment, the problem of doors that stand ajar due to wind or air-conditioning pressures.

STANDARD PACKAGE

Individually boxed with strike and machine screws for mounting. Cylinders available separately. Shipping weight: 2 lbs.

800.872.3267 • Fax 800.232.7329

10027 S. 51st Street, Ste 102

Phoenix, Arizona 85044

ARM-014-9/14

www.adamsrite.com

 

Loading...
+ 1 hidden pages