Page 1
POWER
4612 POWER TRANSFER DEVICE
Specifications
P-9
4612 Power
Transfer Device
ALUMINUM
HOLLOW
METAL
The 4612 Power Transfer Device channels electrical
wiring from the door frame into the door itself. This powers
electric strikes, locks, exit bars, and more on doors hung
with butt-type hinges.
Function
Provides a secure and unobtrusive means of channeling electrical wiring from the
door frame into the door itself, for powering electric strikes, locks, exit bars, etc.
Suitable for any door hung with butt-type hinges, including continuous or pivots
offset 3/4" or less. (Not compatible with center-pivot doors.)
WOOD FIRE RATED
UL634
CONDUIT
• Spring steel helix has internal diameter of approximate
5/16”. This provides ample room for multiple wires of
the low voltage type used with most electrical hardware.
HOUSING
• Stamped steel, approximately 1/16” thick. Short (105°
swing) version shown is 11-1/12” long. 180° version is
20-5/21” long. Chrome finish.
CASE-KNIFE GUARD
• Particularly for out-swinging doors, a steel barrier
fence offers extra protection against attack on the
conduit by knives, shims, or other tools. Completely
hidden when door is closed.
OPTIONS
• Available for application in aluminum, hollow steel,
or wood door and frames. Standard (short) version
suits doors that swing up to 105°. A longer version is
available for doors that open 180°. Swing Clear option
is also available.
STA N DARD PAC K AGE
• Individually boxed with fasteners as required for each
application type: wood, steel, or aluminum. Shipping
weight approximately 1 lb.
ARM-014-9/14
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
Page 2
P-10
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
4612 POWER TRANSFER DEVICE
POWER
Dimensions
12-23/32"
321.5mm
21/32"
17mm
10-5/32"
258mm
15/32"
11.9mm
11-25/32"
299.2mm
3/4"
19.1
mm
mm
1/4"
15-7/16"
392.1
6-3/4"
171.5mm
mm
11/16"
17.5mm
15/32"
11.9mm
15/16"
23.8
6.4mm
CASE-KNIFE GUARD
7/16"
11.1mm
TYP.
Installation
105˚ Swing
FRAME
FROM
POWER
SOURCE
10-9/32"
261.18mm
1"
25.4mm
1/8"
DIA.
3.2mm
(2PLCS)
M4 SCREW
(2PLCS)
DOOR
#6 X 1"
SELF-TAPPING
SCREW (4)
SPRING
DOOR
9/64"
3.6
(3 PLCS)
3-1/2"
88.9mm
#8 X 3/8"
PAN HEAD
SCREW (2)
DIA.
mm
35/64"
13.9mm
TO ELECTRIC
HARDWARE
DIA.
Door and Frame Prep - 105˚ Swing
1. For wood frame, the rectangular cutout is 2” deep minimum.
2. 4612 Power Transfer Device is designed to protect the wire. Care
should also be taken when inserting wires through this device.
3. Only stranded wires to be employed.
4. Size and number of wires must comply with the National Electric Code,
NFPA, and local authorizes having jurisdiction. Wire size shall be at
least 22 gauge.
5. This device is intended for low voltage use only (30 VAC, 42.5 VDC,
10 W max.).
6. Wire should be labeled, appliance wiring material with minimum
1/32” thick insulation.
HOW TO ORDER 4612 POWER TRANSFER DEVICE
Specify quantity and the following information. Order related products separately.
DOOR SWING
4612 -1
1 105° swing
1SC Swing clear, 90°
2 180° swing
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlatches Electric Strikes Exit Devices Trim
4300 Electrified Deadlatch. 7100, 7200, 7400 Series Electric Strikes. All electrified exit devices. 3080 Entry Trim, 3090P/3090C Keyless Entry
©2014, Hanchett Entr y Systems, Inc., an ASSA ABLOY Group company.
Loading...