Page 1
STILE OR RAIL
E82102
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS+1890
4300
4510
4530
4900
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
FLUSHBOLTS
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
DIMENSIONS OF CAM TO OPERATE:
INCHES
Nominal, subject to tolerance ext remes.
Jamb
Preparation
2206 Strike
Stile Preparation
For Clutched Exterior
Trim Set
CUTOUT
TOLERANCE:
+ 0.015 +0.38
- 0.000 - 0.0
MAXIMUM GAP
DOOR TO JAMB:
1/8"
Cylinder Cam
2290 Series locks are operab le by any
standard 1-5/32" diameter mortise cylinder
with special MS
®
cam dimensioned as show n.
Cylinders with MS
®
cams can be readily
obtained from most cylinder manufa cturers.
See page SW-3 7 for cylinder make and trim
information.
CAM TOLERANCE:
CYLINDER
C
L
25/32
3/161/8R
1-1/4
4-3/16
2-1/8
1-1/4
BACKSET
8
ARMO RED
FACE PL ATE
1-1/4 X 8"
FLAT (INCLUDED) FPK-0066-0X-XXX
HOW BACKSET
IS MEAS URED
CYLINDER
FLAT
BEVEL
C
L
C
L
C
L
4 7/8
3 3/8
4 1/8
1 1/4
1/8
1/8
5/8
C
L
OF
LOCK
OF LOCK AND STRIKE
C
L
C
L
OF
STRIKE PLATE
5-25/32
"A"
"B"
8
3/4
1-11/32
11/16
2-5/32
2-27/32
7-11/16
1
5/8
3-3/16
1-23/32
1/2
1
BACKSE T"A" "B"
1-1/8" 1-1/8
1-3/4
1-1/2"
1-1/22-1 /8
DEADLOCKS
DUAL FORCE® 2290 INTERCONNECTED
DEADBOLT/DEADLATCH
DL-29
DUAL FORCE® 2290 INTERCONNECTED
DEADBOLT/DEADLATCH
Dual Force® 2290
Interconnected
Deadbolt/Deadlatch
HOLLOW
METAL
WOOD
The Dual Force 2290 Interconnected Deadbolt/Deadlatch
provides access control and security for wood or hollow
metal doors. Latch and deadbolt capabilities are combined
for fast, easy, and panic-proof exiting.
Function
The Dual Force 2290 combines the access control capabilities of a latch with
the security of a deadbolt. The key retracts and extends the deadbolt (and
deadlatch) from either side. The exterior lever retracts the latch only while the
inside lever retracts the deadbolt and latch simultaneously for fast, easy, panicproof exiting. Intended for out-swinging doors.
ELECTRIFIED
OPTION
GRADE 1
Operation
Key or thumbturn retracts or extends deadbolt or deadlatch.
Inside lever retracts both when configured with interconnect
feature. Outside lever retracts latch only. Latch holdback
feature activated or deactivated by turning key to retract latch
and sliding holdback button on faceplate down to hold and up
to release.
Specifications
INTER-CONNECTION
• Field selectable inter-connection feature allows interior trim
to retract deadbolt and deadlatch. Consult the local building
official for guidance in code compliance. 1-3/4" minimum door
thickness required.
CYLINDER BASKET
• 1-1/8" or 1-1/2" only.
LATCHBOLT/DEADBOLT
• Latchbolt: 5/8" throw of solid brass. Easily reversible using
only a screwdriver. Deadbolt: 1" throw of stainless steel.
AUXILIARY DEADLATCH PIN
• Stainless steel. Deadlocks latchbolt to prevent “loiding”
or case-knife entry.
FACEPL ATE S
• Measures 1-1/4" x 8". Includes FaceStyle faceplate system
that adapts to flat or beveled door edge.
STRIKES
• Standard strike furnished is the 2206 (ASA) strike for flat
jamb where door closes flush or nearly flush.
CYLINDER CAM
• The Dual Force 2290 is operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained from
most cylinder manufacturers. See CYLINDERS section for
cylinder make, thumbturn and trim ring information.
OPTIONS
• Specify trim option, lever style, finish, and strike. Also adapts
to paddle operator 4591. See 2190 for aluminum door version
for narrow stile door construction. Thick Door Kit 2190-TDKXX available separately. Specify door thickness. Request to
Exit RXK-4600 switch available for small format levers. Note
that the low profile trim (trim option 3) is recommended for inswing door applications.
ELECTRIFIED TRIM OPTIONS
• Order 2190 Electrification Kit EK-2190 for adding to the
clutched exterior lever. Dual voltage 12/24 VDC rated for
continuous duty operation. Energizing the lever allows exterior
“Dim A”
.800" ± .005"
20.3mm ± .127mm
lever to be turned to retract latch only. The electrified option is
not available for low profile trim (trim option 3).
STA N DAR D PACK AG E
.120"
R
3.0mm
HOW TO ORDER DUAL FORCE
.182"
4.6mm
®
2290 INTERCONNECTED DEADBOLT/DEADLATCH
Specify quantity and the following information. Order related products separately.
PRODUCT
NO.
BACKSET STRIKE FACEPL ATE FI NI SH TRIM
• Individually boxed with trim as specified, strike and machine
screws for mounting. Cylinders available separately.
Shipping weight: 2 lbs.
HANDLE
DESIGNATION
TRIM AND HAND LE
FINISH
CLUTCHED EXTERIOR
TRIM SET
ARM-014-9/14
STANDARD SERIES:
DESIGNER SERIES:
SMALL FORMAT
LEVER SET
01-CURVE
MD MI
ME MJ
MG MN
02-ROUND
03-SQUARE
MV
MW
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
2290 -3 1 1 1 01 -32D
3 1-1/8" 0 None 0 US to match trim finish 0 None 00 No Handle 03 Bright Brass (US3)
4 1-1/2" 1 Standard Flat 1 Clear Anodized 628 1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)
2 Dark Bronze Anodized 313 2 With Electrified Trim Set 01 Cur ve 10B Dark Bronze (US10B)
3 Black Anodized 335 3 Low Profile Trim 02 Round 32 Bright Stainless (US32)
03 Square 32D Satin Stainless (US32D)
DESIGNER SERIES:
MD MJ
ME MN (Handed)
MG MV (Handed)
MI MW
Trim options 1 and 2 are for outswing doors only.
RELATED PRODUCTS
Electrification Accessories Cylinders
2290 Interconnected Deadbolt/Deadlatch
can be electrified in the field using the 2190
Electrification Kit (EK-2190) or it can be
ordered with electrified trim (trim option 2).
Extended lip strikes.
2290 thick door kits.
2290 Interconnected Deadbolt/Deadlatch is
operable by any standard 1-5/32" diameter
®
mortise cylinder with MS
cam.
Page 2
DL-30
DUAL FORCE® 2290 INTERCONNECTED
DEADBOLT/DEADLATCH
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
DEADLOCKS
Dimensions DimensionsStile Preparation
FOR CLUTCHED EXTERIOR
63/64"
25mm
12.7
1/2"
mm
TRIM SET
BACKSET
“B”
“A”
8"
203.2mm
7-11/16"
195.3mm
5-51/64"
147.2mm
HOW BACKSET
IS MEASURED:
CYLINDER
C
L
FLAT
BEVEL
1"
25.4
BACKSET “A” “B”
1-1/8"
mm
28.6
C
L
C
L
1-1/2"
mm
38 .1
ARMORED FACEPLATE
FLAT (incl uded) FPK-0 066-OX-XXX
mm
15.9mm
2-5/32"
54.8mm
1-23/64"
34.5mm
45/64"
17.9mm
11/16"
17.5mm
5/8"
1-1/8"
28.6
1-1/2"
38 .1
1-1/4" X 8 "
mm
mm
2-55/64"
72.6mm
45.2
1-3/4"
2-1/8"
mm
54
8"
203.2
mm
MAXIMUM GAP
DOOR TO JAMB:
1/8"
mm
3.8
1-1/4"
31.8
mm
mm
Latch/Lock, Cylinder &
Lever Installation
1-1/4"
31.8mm
4-13/64"
106.8
2-5/32"
mm
54.8mm
INT.
OUTSIDE
3-1/4"
82.6
mm
2-11/16"
68.3mm
8-59/64"
226.6mm
1-55/64"
47.2
mm
2-7/8"
INT.
73mm
3"
EXT.
76.2mm
2290 WITH 01 LEVER*
1-9/64"
5"
127mm
63/64"
2-11/16"
25mm
29
mm
68.3mm
8-59/64"
226.6mm
63/64"
25mm
2-15/32"
62.7
6-21/32"
169
mm
mm
1-23/64"
34.5
mm
INSIDE
LOW PROFILE TRIM
4-3/8"
111.1mm
3-1/4"
INT.
82.6mm
INT.
3-7/32"
81.8mm
3-3/16"
81mm
INT.
3-5/16"
EXT.
84.1
mm
2290 WITH 02 LEVER*
4-1/2"
114.3mm
INT.
1-23/64"
34.5
mm
3-1/8"
79.4mm
INT.
EXT.
2-45/64"
68.7mm
2-51/64"
71.1mm
2290 WITH 03 LEVER*
Jamb Preparation
2206 STRIKE
LOCK &
C
OF STRIKE
L
PLATE
1/8"
3.2
mm
3-3/8"
85.7mm
4-1/8"
104.8mm
4-7/8"
123.8mm
1-1/4"
31.8mm
1/8"
3.2mm
5/8"
15.9mm
C
OF LOCK
L
C
OF STRIKE
L
PLATE
BEVELED OR FLAT EDGE
EXT.
3-3/8"
85.7mm
4-29/32"
124.6mm
EXT.
3-11/32"
84.9mm
4-5/16"
109.5mm
EXT.
83.3mm
5-1/8"
130.2mm
EXT.
3-13/32"
86.5mm
3-9/32"
2290 WITH MD LEVER 2290 WITH ME LEVER 2190 WITH MG LEVER 2290 WITH MI LEVER
INT.
EXT.
3-5/32"
80.2mm
3-5/16"
84.1mm
4-3/8"
111.1mm
INT.
EXT.
2-25/32"
70.6mm
2-15/16"
74.6mm
4-3/16"
106.4mm
INT.
EXT.
3-17/32"
89.7mm
3-11/16"
93.7mm
4-11/16"
119mm
INT.
EXT.
3-11/32"
2290 WITH MJ LEVER 2290 WITH MN LEVER** 2290 WITH MV LEVER** 2290 WITH MW LEVER
* THE 2290-01, -02, AND -03 LEVER HANDLES ARE DESIGNED TO RETURN WITHIN 1/2" OF THE DOOR FACE.
HANDLES IN THE DESIGNER SERIES DO NOT HAVE THIS SAME FEATURE. PLEASE VERIFY WITH LOCAL CODE REQUIREMENTS TO ENSURE COMPLIANCE.
** HANDED
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
3-3/16"
81mm
84.9mm
5"
127mm
114.3mm
4-1/2"
Loading...