Acer ASPIRE 4251, ASPIRE 4551, ASPIRE 4551G, TRAVELMATE 4740, TRAVELMATE 4740G User Manual
...
MATERIAL SAFETY DATA SHEET
Issued/Revised date: Jan-12-2011 Document No:WI-01112011001
1. Product and Company Identification
Product Identification :
Lithium-Ion Rechargeable Battery Pack Detail in Appendix
Manufacturer :
Simplo Technology Co., Ltd.
No.471, Sec.2, Pa Teh Rd,. Hu Kou 303, Hsin Chu Hsien, Taiwan
Tel : +886-3-5695920 Fax : +886-3-5695931
Simplo Electronics (CHANGSHU) INC.
No.2 DongNan Avenue,ChangShu,JiangSu Province , China
TEL :+86-0512-52302255 FAX :+86- 0512-52302277
2.Hazards Identification
Primary routes of entry : Skin contact, Skin absorption; Eye contact, Inhalation and ingestion: No Symptoms of exposure : Skin contact, No effect under routine handling and use.
Skin absorption : No effect under routine handling and use. Eye contact : No effect under routine handling and use. Inhalation : No effect under routine handling and use. Reported as carcinogen : Not applicable
3.Composition / Identification on Ingredients
Substance : Lithium Ion Battery CAS number : Not specified
UN Class : Even classified as lithium batteries, they are exempted from dangerous goods. UN-Recommendations on the Transport of Dangerous Goods Model Regulations.
*Lithium ion cells and batteries may be offered for transport if they meet the following :
*For cells, the Watt-hour rating should not be more than 20 Wh;
*For batteries, the Watt-hour rating should not be more than 100 Wh. The Watt-hour rating must be marked on the outside of the battery case .
*Each cell or battery of the type proved to meet the requirements of each test in the UN manual of tests and criteria, Part III, subsection 38.3.
*General requirements and additional requirements, Please see Section of Packing Instruction
965, 966, 967 accordingly or UN 3480 , UN3481.
Composition : |
|
|
3-1. |
Cases: Plastic |
Not dangerous |
3-2. |
Printed Circuit Board Assembly |
Not dangerous |
3-3. |
Lithium Ion Cell : |
|
|
Aluminum |
2-10 % |
|
Metal Oxide (proprietary) |
20-50 % |
|
|
1 |
Polyvinylidene Fluoride (PVDF) |
<5 % |
Copper |
2-10 % |
Carbon (proprietary) |
10-30 % |
Electrolyte (proprietary) |
10-20 % |
4.First Aid Measures
Inhalation : Make the victim blow his/her nose, gargle. Seek medical attention if necessary.
Skin contact : Remove contaminated clothes and shoes immediately. Wash extraneous matter or contact region with soap and plenty of water immediately.
Eye contact : Do not rub one’s eyes. Immediately flush eyes with water continuously for at least 15 minutes. Seek medical attention immediately.
Ingestion : Make the victim vomit. When it is impossible or the feeling is not well after vomiting, seek medical attention.
5.Fire Fighting Measures
Extinguishing Media : Use suitable extinguishing media.
Firefighting Equipment : Use NIOSH/MSHA approved full-face self-contained breathing apparatus (SCBA) with full protective gear.
6.Accidental Release Measures
On Land : Place material into suitable containers and call local fire/police department. In Water : If possible, Remove from water and call local fire/police department.
7.Handling and Storage
Handling :
Do not expose the battery to excessive physical shock or vibration. Short-circuiting should be avoided. However, accidental short-circuiting for a few seconds will not seriously affect the battery. Prolonged short circuits will cause the battery to rapidly lose energy, could generate enough heat to burn skin. Sources of short circuits include jumbled batteries in bulk containers, coins, metal jewelry, metal covered tables, or metal belts used for assembly of batteries in devices. To minimize risk of short-circuiting, the protective case supplied with the battery should be used to cover the terminals when transporting or storing the battery. Do not disassemble or deform the battery. Should an individual cell within a battery become ruptured, do not allow contact with water.
Storage :
The lithium ion battery should be between 25% and 75% of full charge when stored for a long period of time. Store in a cool, dry, well ventilated area. And temperature above 100 degree can result in loss of battery performance, leakage, or rust. Do not expose the battery to open flames.
8.Exposure Controls / Personal Protection
Engineering Controls : Keep away from heat and open flame. Store in a cool dry place Personal Protection :
Respirator : Not required during normal operations. SCBA required in the event of a fire. Eye/Face Protection : Not required beyond safety practices of employer.
Gloves : Not required for handling of battery.
Foot Protection : Steel toed shoes recommended for large container handling.
9.Physical and Chemical Properties
2
Loading...