Acer P5271I, P5271N, P5290, P5390W User Manual

0 (0)

Acer Projector

P5271/P5271i/P5271n/P5390W/

P5290 Series

User's Guide

Copyright © 2009. Acer Incorporated.

All Rights Reserved.

Acer Projector P5271/P5271i/P5271n/P5390W/P5290 Series User's Guide

Original Issue: 06/2009

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.

Acer Projector P5271/P5271i/P5271n/P5390W/P5290 Series

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

"HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

iii

Information for your safety and comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to the external power supply unit:

Install the power supply unit before connecting the power cord to the AC power outlet.

Unplug the power cord before removing the power supply unit from the projector.

If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

Warnings!

Do not use this product near water.

Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.

Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

iv

To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

v

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

the power cord or plug is damaged, cut or frayed

liquid was spilled into the product

the product was exposed to rain or water

the product has been dropped or the case has been damaged

the product exhibits a distinct change in performance, indicating a need for service

the product does not operate normally after following the operating instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Additional safety information

Do not look into the projector's lens when the lamp is on. The bright may hurt your eyes.

Turn on the projector first and then signal sources

Do not place the product in following environments:

Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary.

Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.

Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the life span and darkening the image.

Locations near fire alarms.

Locations with an ambient temperature above 40 ºC/104 ºF.

Locations where the altitudes are higher than 10000 feet.

Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It

vi

might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Do not keep using this product to break or drop it. In this case contact your dealer for inspection.

Do not face the projector lens to the sun. It can lead to fire.

When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power.

Do not turn off the main power abruptly or unplug the projector during operation. It can lead to lamp breakage, fire, electric shock or other trouble. The best way is to wait for the fan to turn off before turning main power off.

Do not touch air outlet grille and bottom plate which becomes hot.

Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust.

Do not look into the air outlet grille when projector is operating. It may hurt your eyes.

Always open the lens shutter or remove the lens cap when the projector is on.

Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the projector or remote controller.

The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement.

Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions.

Never replace the lamp assembly or any electronic components unless the projector is unplugged.

The product will detect the life of the lamp itself. Please be sure to change the lamp when is showing warning message.

When changing the lamp, please allow unit to cool down, and follow all changing instructions.

Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module.

Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.

Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage.

This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

vii

Operating environment for using wireless function (Optional)

Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your machine under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G.

Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used normally, and it and its antenna are positioned at least 1.5 centimeters (5/8 inches) away from your body. It should not contain metal and you should position the device the abovestated distance from your body.

To successfully transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available.

Ensure that the above separation distance instructions are followed until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with hearing aids should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF transmissions.

Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following:

Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker.

Not carry the device near your pacemaker when the device is switched on. If you suspect interference, switch off your device, and move it.

viii

Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.

Caution for Listening

To protect your hearing, follow these instructions.

Increase the volume gradually until you can hear clearly and comfortably.

Do not increase the volume level after your ears have adjusted.

Do not listen to music at high volumes for extended periods.

Do not increase the volume to block out noisy surroundings.

Decrease the volume if you can't hear people speaking near you.

ix

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

“Lamp(s) contain Mercury, Dispose Properly.”

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

x

First things first

Usage Notes

Do:

Turn off the product before cleaning.

Use a soft cloth moistened with mild detergent to clean the display housing.

Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

Don't:

Block the slots and openings on the unit provided for ventilation.

Use abrasive cleaners, waxes or solvents to clean the unit.

Use under the following conditions:

In extremely hot, cold or humid environments.

In areas susceptible to excessive dust and dirt.

Near any appliance that generates a strong magnetic field.

Place In direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

Please do not open or disassemble the product as this may cause electric shock.

When changing the lamp, please allow unit to cool down, and follow all changing instructions.

This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages.

Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module.

When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.

Turn on the projector first and then the signal sources.

Do not use lens cap when projector is in operation.

When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

Information for your safety and comfort First things first

Usage Notes

Precautions

Introduction

Product Features

Package Overview

Projector Overview Projector Outlook Control Panel

Remote Control Layout

Getting Started

Connecting the Projector

Connecting the Projector for Wireless Function Turning the Projector On/Off

Turning on the Projector Turning the projector off Adjusting the Projected Image

Adjusting the Height of Projected Image How to optimize image size and distance

How to get a preferred image size by adjusting distance and zoom

How to get a preferred image position by adjusting lens shift

User Controls

Installation menu

Acer Empowering Technology

Onscreen Display (OSD) Menus Color

Image Management Setting Audio

iii

Contents

x

 

x x

1

1

2

3

3

5

6

9

9

10

11

11

12

13

13

14

18

22

27

27

28

29

30

31

33

33

36

Timer

36

Language

37

Appendices

38

Troubleshooting

38

LED & Alarm Definition Listing

42

Replacing the Lamp

43

Ceiling Mount Installation

44

Specifications

47

Compatibility modes

49

Regulations and safety notices

53

1

Introduction

Product Features

This product is a single-chip DLP® projector. Outstanding features include:

DLP® technology

P5271/P5271i/P5271n/P5290: Native 1024 x 768 XGA resolution P5390W: Native 1280 x 800 WXGA resolution

4:3 / 16:9 aspect ratio supported (P5271/P5271i/P5271n/P5290) Full/4:3/16:9/L.Box aspect ratio supported (P5390W)

Manual lens shift adjustment

Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images

High brightness and contrast ratio

Versatile display modes (Bright, Presentation, Standard, Video, User) enable optimum performance in any situation

NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported

Top-loading lamp design allows easy lamp replacement

Lower power consumption and economy (ECO) mode extends lamp life

Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement

Empowering Key reveals Acer Empowering Technology utilities (Acer eView, eTimer, eOpening, ePower Management) for easy adjustment of settings

Equipped with HDMITM connection supporting HDCP

Advanced digital keystone correction optimizes presentations

Multi-language onscreen display (OSD) menus

Full-function remote control

Manual focus projection lens zooms up to 1.6x (P5271/P5271i/P5271n/ P5290/P5390W)

2x digital zoom and pan move function

Microsoft® Windows® 2000, XP, Vista® OS compliant

Manual lens shift adjustment

English

English

2

Package Overview

This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing.

Projector with lens cap

Power cord

VGA cable

Composite video cable

DVI-D Cable

Security card

c o p y r i g h t

2 0 0 9

A c e r

I n c .

A ll R i g

h t s

R e s erve

d. http

://w ww.acer.com

#A #B

Acer Projector

Quick Start Guide

2 x User's Guide (Wireless CD

Remote control

2 x Quick start guide

for P5271i)

(#B for P5271i)

(Wireless Quick Start Guide

 

 

for P5271i)

2 x Battery

2 x Wireless antenna

Carrying case

 

(P5271i)

 

Battery Pack with USB PnS handy drive (P5271i)

3

Projector Overview

Projector Outlook

Front / upper side

4

 

7

8

9

5

6 7

 

 

 

10 11

 

 

 

 

Lens

ShiftControl

 

LENS SHIFT

 

 

 

 

 

PROJECTOR

 

 

 

 

 

 

1

2

3

 

 

 

 

 

 

#

Description

 

#

 

Description

1

Lens cap

 

7

Remote control receivers

2

Elevator button

 

8

Control panel

3

Elevator foot

 

9

Power button

4

Zoom Lens

 

10

Lens shift control rings

5

Zoom ring

 

11

Tilt adjusting wheel

6

Focus ring

 

 

 

 

English

English

4

Rear side

 

 

21

20

1

2

 

 

3

4

5

6

7

8

9 10

 

 

 

 

HDMI

 

 

DVI

 

 

HDMI

 

 

 

 

AUDIO IN 1

AUDIO OUT

 

 

USB

DVI

VGA OUT

USB

 

 

 

VGA OUT

VGA IN 1

S-VIDEO

VIDEO

 

 

 

 

 

 

 

RS232

 

 

 

 

 

ANTENNA

 

POWER

RESET

AUDIO

 

 

 

 

AUDIO IN 2

WIRED REMOTE

ANTENNA

 

 

DC OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WIRELESS

OUT

 

 

 

 

 

 

 

 

 

 

 

LAN

 

LAN

 

VGA IN 2

 

 

 

 

 

 

 

 

 

16

17

11

18 19 20

 

12

 

 

13

14

15

16

 

 

 

 

 

 

 

 

 

 

 

 

#

 

Description

 

#

 

 

 

 

Description

 

 

1

USB connector

 

 

13

 

 

Audio input connector (VGA IN 2/ DVI)

 

 

 

 

 

 

 

2

DVI input connector (for digital signal

14

 

 

Wired IR remote input connector

 

 

with HDCP function)

 

 

 

 

 

 

 

 

 

 

 

 

 

3

HDMI connector

 

 

15

 

 

Kensington™ lock port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Monitor loop-through output

 

Below items are for P5271i only:

 

 

connector (VGA-Out)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PC analog signal/HDTV/SCART/

 

 

 

 

 

 

 

 

 

 

 

 

 

5

component video input connector

 

16

 

 

Antenna

 

 

 

 

 

 

 

 

(VGA IN 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

S-Video input connector

 

17

 

 

Power LED for wireless

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

Composite video input connector

 

18

 

 

Reset button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

Audio input connector (VGA IN 1/

 

19

 

 

Audio output connector for wireless

Component/Composite/S-Video/HDMI)

 

 

 

 

 

 

 

 

9

RS232 connector

 

 

Below

item is for P5271i and P5271n only:

 

 

 

 

 

 

 

10

Audio output connector

 

20

 

 

LAN (RJ45 Port for 10/100M Ethernet)

 

 

 

 

 

 

 

 

 

11

Power socket

 

 

Below

item is for P5271n only:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PC analog signal/HDTV/SCART/

 

 

 

 

 

 

 

 

 

 

 

 

 

12

component video input connector

 

21

 

 

DC Output

 

 

 

 

 

 

 

 

(VGA IN 2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Control Panel

 

1

 

6

 

 

LAMP

TEMP

 

2

RESYNC

SOURCE

 

 

7

 

3

 

8

 

 

 

MENU

 

4

 

3

 

5

 

9

 

 

 

#

Function

Description

1

LAMP

 

Lamp Indicator LED

2

RESYNC

 

Automatically synchronizes the projector to the

 

input source.

 

 

 

3

KEYSTONE

 

Adjusts the image to compensate for distortion

 

caused by tilting the projector.

 

 

 

Press "MENU" to launch the Onscreen display

4

MENU

(OSD) menu, back to the previous step for the

OSD menu operation or exit the OSD menu.

 

 

 

 

• Confirm your selection of items.

 

 

 

5

POWER

See the contents in "Turning the Projector On/

Off" section.

 

 

 

 

 

 

 

 

6

TEMP

Temp Indicator LED

 

 

 

 

 

 

Press "SOURCE" to choose RGB, Component, S-

7

SOURCE

Video, Composite, SCART, HDTV and HDMI™

 

 

sources.

 

 

 

 

 

8

Four directional select keys

Use to

select items or make

adjustments to your selection.

 

 

 

 

 

9

Empowering key

Unique Acer functions: eOpening, eView, eTimer,

ePower Management.

 

 

English

Acer P5271I, P5271N, P5290, P5390W User Manual

English

6

Remote Control Layout

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PO W ER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FR EEZE

 

HIDE

5

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A SPECT

 

 

 

 

R ESY N C

SO U R CE

 

 

 

 

 

R AT IO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11

10

 

 

 

ZO O M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

28

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R G B

BRIGHTNESS

 

CO LO R

CO N TR A ST

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PgUp

17

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PgDn

21

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

 

 

 

V G A COMPONENT

 

V ID EO

 

S-V ID EO

22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

24

 

 

 

DV I

 

H D M I

W IR ELESS

 

M U TE

26

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

27

9

10

2 1

7 10

5 6

3 4

8 32

12

13

 

28

9 31

29

30

 

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16

11

18

15

17

20

22

19

21

23

25

24

 

 

 

 

 

 

 

 

 

26

 

 

 

 

 

 

 

 

 

27

 

 

 

 

 

 

 

 

 

 

(P5271i)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VZ.J8700.002

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VZ.J8700.001

 

 

 

 

 

 

 

 

 

 

 

 

 

7

#

 

Icon

Function

 

Description

1

 

 

 

 

 

 

 

 

 

 

Infrared

Sends signals to the projector.

 

 

 

 

 

 

 

 

 

 

 

transmitter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2(#)

 

 

 

 

 

 

 

 

 

 

Laser pointer

Aim the remote at the viewing screen.

3

 

 

 

 

 

 

 

 

 

 

FREEZE

To pause the screen image.

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

HIDE

Momentarily turns off the video. Press "HIDE" to hide the

 

 

 

 

 

 

 

 

 

 

 

 

image, press again to display the image.

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

RESYNC

Automatically synchronizes the projector to the input source.

6

 

 

 

 

 

 

 

 

 

 

SOURCE

Press "SOURCE" to choose from RGB, Component, S-Video,

 

 

 

 

 

 

 

 

 

 

 

 

Composite, SCART, HDTV and HDMI™ sources.

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

POWER

Refer to the "Turning the Projector On/Off" section.

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

ASPECT RATIO

To choose the desired aspect ratio (Auto/4:3/16:9)

9

 

 

 

 

 

 

 

 

 

 

ZOOM

Zooms the projector display in or out.

10(#)

 

 

 

 

 

 

 

 

 

 

Laser button

Aim the remote at the viewing screen, press and hold this

 

 

 

 

 

 

 

 

 

 

 

 

button to activate the laser pointer.

 

 

 

 

 

 

 

 

 

 

 

 

This function is not supported in Japanese market.

 

 

 

 

 

 

 

 

 

 

 

 

 

11

 

 

 

 

 

 

 

 

 

 

Empowering key

Unique Acer functions: eOpening, eView, eTimer, ePower

 

 

 

 

 

 

 

 

 

 

 

 

Management.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

 

 

 

 

 

 

KEYSTONE

Adjusts the image to compensate for distortion caused by

 

 

 

 

 

 

 

 

 

 

 

 

tilting the projector (± 40 degrees).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13

 

 

 

 

 

 

 

 

 

 

MENU

Press "MENU" to launch the Onscreen display (OSD)

 

 

 

 

 

 

 

 

 

 

 

 

 

menu, back to the previous step for the OSD menu

 

 

 

 

 

 

 

 

 

 

 

 

 

operation or exit the OSD menu.

 

 

 

 

 

 

 

 

 

 

 

 

Confirm your selection of items.

 

 

 

 

 

 

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

PAGE

For computer mode only. Use this button to select the next or

 

 

 

 

 

 

 

 

 

 

 

 

previous page. This function is only available when connected

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to a computer via a USB cable.

 

 

 

 

 

 

 

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

RGB

Press "RGB" for true-color optimization.

16

 

 

 

 

 

 

 

 

 

 

BRIGHTNESS

Press "BRIGHTNESS" to adjust the brightness of the image.

 

 

 

 

 

 

 

 

 

 

 

 

 

17

 

 

 

 

 

 

 

 

 

 

CONTRAST

Use the "CONTRAST" option to control the difference

 

 

 

 

 

 

 

 

 

 

 

 

between the lightest and darkest parts of the picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

18

 

 

 

 

 

 

 

 

 

 

COLOR

Press "COLOR" to adjust the color temperature of image.

 

 

 

 

 

 

 

 

 

 

 

 

 

19

 

 

 

 

 

 

 

 

 

 

VGA

Press "VGA" to change source to the VGA connector. This

 

 

 

 

 

 

 

 

 

 

 

 

connector supports analog RGB, YPbPr (480p/576p/720p/

 

 

 

 

 

 

 

 

 

 

 

 

1080i), YCbCr (480i/576i) and RGBsync.

20

 

 

 

 

 

 

 

 

 

 

COMPONENT

Press "COMPONENT" to change source to Component video.

 

 

 

 

 

 

 

 

 

 

 

 

This connection supports YPbPr (480p/576p/720p/1080i) and

 

 

 

 

 

 

 

 

 

 

 

 

YCbCr (480i/576i).

 

 

 

 

 

 

 

 

 

 

 

 

 

21

 

 

 

 

 

 

 

 

 

 

S-VIDEO

To change source to S-Video.

22

 

 

 

 

 

 

 

 

 

 

VIDEO

To change source to COMPOSITE VIDEO.

23

 

 

 

 

 

 

 

 

 

 

DVI

To change source to DVI-D.

24

 

 

 

 

 

 

 

 

 

 

HDMI™

To change source to HDMI™. (for the model if with HDMI™

 

 

 

 

 

 

 

 

 

 

 

 

connector)

25

 

 

 

 

 

 

 

 

 

 

MUTE

To turn on/off the volume.

26(*)

 

 

 

 

 

 

 

 

 

 

WIRELESS

Press "WIRELESS" to display the image which is wirelessly

 

 

 

 

 

 

 

 

 

 

 

 

transmitted from the PC to the projector via the "Acer

 

 

 

 

 

 

 

 

 

 

 

 

eProjection Management" utility. (for wireless model)

 

 

 

 

 

 

 

 

 

 

 

 

 

27

 

 

 

 

 

 

 

 

 

 

KeyPad 0~9

Press "0~9" to input a password in the "Security".

28

 

 

 

 

 

 

 

 

 

 

Four directional

Use up, down, left, right buttons to select items or make

 

 

 

 

 

 

 

 

 

 

 

select keys

adjustments to your selection.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

English

8

#

Icon

Function

Description

29(*)

 

MOUSE Left/

Left-/right-click buttons are on the left and right, respectively;

 

 

Right Click

the center button works as a multidirectional pointer stick. To

 

 

 

enable this function, an USB cable must be connected to

 

 

 

projector from your PC.

 

 

 

 

30(*)

 

VOLUME

Increases/decreases the volume.

31(*)

 

LOCATION

Choose the menu location on the display screen.

32

 

PIP

No function

 

 

 

 

Note: "#" Japan area is not supported. "*" Only for P5271i.

Note:

1

2

9

Getting Started

Connecting the Projector

DVD player,

Set-top Box,

HDTV receiver

 

DVI

DVD player

 

 

 

 

 

 

 

 

 

 

 

 

R B G

S-Video Output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVI-D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video Output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D-Sub

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Y

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R B G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

RS232

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RS232

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDTV adapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVI-D

 

 

 

 

D-Sub

 

 

 

 

Y

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB

 

 

DVI

 

 

 

 

VGA OUT

 

 

 

 

VGA IN 1

 

 

 

 

AUDIO IN 1

 

 

AUDIO OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-VIDEO VIDEO

RS232

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO IN 2

 

WIRED REMOTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DC OUT

 

LAN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VGA IN 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D-Sub

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VGA

 

 

 

 

 

 

 

 

 

 

2

 

 

 

7

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

 

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sub-D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Intrnet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

#

Description

#

Description

1

Power cord

8

DVI cable

 

 

 

 

2

VGA cable

9

HDMI cable

 

 

 

 

3

Composite video cable

10

3 RCA component cable

 

 

 

 

4

USB cable

11

RS232 cable

 

 

 

 

5

VGA to component/HDTV adapter

12

Audio cable Jack/RCA

 

 

 

 

6

S-Video cable

13

LAN Cable

 

 

 

 

7

Audio cable jack/jack

14

Audio cable jack for wired remote

 

 

 

 

English

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.

Loading...
+ 49 hidden pages