Acer Z650, HG-80ST, HE-815ST, H7550ST, H7550STZ User Manual

...
0 (0)

Acer Projector

H7550ST/E155S/HE-815ST/H1P1403/

H7550STz/H7550BD/E155D/HE-815J/

H1P1406/H7550BDz/Z650/EG40S/

HG-80ST/Q1P1504

Series User's Guide

Copyright © 2014. Acer Incorporated.

All Rights Reserved.

Acer Projector User's Guide

Original Issue: 11/2014

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.

Acer Projector

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

"HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

iii

Information for Your Safety and Comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to the external power supply unit:

Install the power supply unit before connecting the power cord to the AC power outlet.

Unplug the power cord before removing the power supply unit from the projector.

If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to

disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

Warnings!

Do not use this product near water.

Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.

Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

iv

To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp.

Using electrical power

This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (14.76 feet) maximum length.

v

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

the power cord or plug is damaged, cut or frayed

liquid was spilled into the product

the product was exposed to rain or water

the product has been dropped or the case has been damaged

the product exhibits a distinct change in performance, indicating a need for service

the product does not operate normally after following the operating instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Additional safety information

Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.

RG2 IEC 62471-5:2015

Turn on the projector first and then signal sources.

Do not place the product in the following environments:

Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary.

Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.

Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the life span and darken the image.

Locations near fire alarms.

Locations with an ambient temperature above 40 ºC/104 ºF.

vi

• Locations where the altitudes are higher than 10000 feet.

Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Do not keep using this product to break or drop it. In this case contact your dealer for inspection.

Do not face the projector lens to the sun. It can lead to fire.

When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.

Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to stop before turning main power off.

Do not touch the air outlet grille and bottom plate which become hot.

Do not look into the air outlet grille when projector is operating. It may hurt your eyes.

Always open the lens shutter or remove the lens cap when the projector is on.

Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control.

The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement.

Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions.

Never replace the lamp assembly or any electronic components unless the projector is unplugged.

The product will detect the life of the lamp itself. Please be sure to change the lamp when warning messages display.

When changing the lamp, please allow the projector to cool down, and follow all changing instructions.

Reset the "Lamp Hour Reset" function from the Onscreen Display "Management" menu after replacing the lamp module.

Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.

Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage.

This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

The radio module certified by Japanese Radio Law is integrated inside.

vii

Caution for Listening

To protect your hearing, follow these instructions.

Increase the volume gradually until you can hear clearly and comfortably.

Do not increase the volume level after your ears have adjusted.

Do not listen to music at high volumes for extended periods.

Do not increase the volume to block out noisy surroundings.

Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/index.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

"Lamp(s) contain Mercury, Dispose Properly."

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

viii

First Thing First

Usage Notes

Do:

Turn off the product before cleaning.

Use a soft cloth moistened with mild detergent to clean the display housing.

Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

Don't:

Block the slots and openings on the projector provided for ventilation.

Use abrasive cleaners, waxes or solvents to clean the unit.

Use under the following conditions:

In extremely hot, cold or humid environments.

In areas susceptible to excessive dust and dirt.

Near any appliance that generates a strong magnetic field.

Place in direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

Please do not open or disassemble the product as this may cause electric shock.

When changing the lamp, please allow the projector to cool down, and follow all changing instructions.

This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages.

Reset the "Lamp Hour Reset" function from the Onscreen Display "Management" menu after replacing the lamp module.

When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.

Turn on the projector first and then the signal sources.

Do not use lens cap when projector is in operation.

When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

Information for Your Safety and Comfort First Thing First

Usage Notes

Precautions

Introduction

Product Features

Package Overview

Projector Overview Projector Outlook Control Panel

Remote Control Layout MHL Feature Introduction

Getting Started

Connecting the Projector Turning the Projector On/Off

Turning On the Projector

Turning Off the Projector Adjusting the Projected Image

Adjusting the Height of the Projected Image How to Optimize Image Size and Distance

How to Get a Preferred Image Size by Adjusting Distance and Zoom

User Controls

Installation Menu

Onscreen Display (OSD) Menus Color

Image

Setting Management Audio

3D Language

iii

Contents

viii

 

viii viii

1

1

2

3

3

4

5

7

8

8

9

9

10

11

11

12

14

16

16

17

18

20

21

25

25

27

28

Appendices

29

Troubleshooting

29

LED & Alarm Definition Listing

33

Using the inner connector(s)

34

Replacing the Lamp

35

Ceiling Mount Installation

36

Specifications

39

Compatibility Modes

41

Regulations and safety notices

45

1

Introduction

Product Features

This product is a single-chip DLP® projector, including the following outstanding features:

DLP® technology

Native 1920 x 1080 1080p resolution, Auto/Full/4:3/16:9/L.Box/16:6 aspect ratio supported

Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D supported and Nvidia 3DTV Play Ready

Enriches 3D experience for 2D contents via 2D to 3D convert function

One-touch "G" or "3D" button on remote control allows quick and easy access to the G or 3D functions

Acer ColorBoost technology delivers vivid, life-like images

High brightness and contrast ratio

Versatile display modes enable optimum performance in any situation

NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported

Lower power consumption and economy (ECO) mode extends lamp life

Dynamic Black / ExtremeEco functions help decrease lamp power consumption and further extend lamp life.

-Dynamic Black: If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced.

-ExtremeEco: The projector will decrease the power consumption of the lamp by up to 70% when no input signal can be detected for 5 minutes.

Acer EcoProjection Technology delivers Intelligent power management approach and physical efficiency improvement

Advanced keystone correction delivers optimum presentations

Multi-language Onscreen Display (OSD) menus

Manual focus/zoom projection lens

2X digital zoom and pan move function

Microsoft® Windows® 2000, XP, 7, 8, 8.1, Vista®, Macintosh OS, Chrome OS compliant

Built-in 20W speaker

DTS sound effect

CEC (Consumer Electronics Control) function supported

English

English

2

Package Overview

This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing.

Projector

Power cord

VGA cable

Security card (Optional)

User’s guide (CD-ROM)

Remote control

 

 

 

 

 

 

 

 

 

 

Quick start guide

Battery x 2

Carrying case

 

 

(Optional)

3D glasses kit (Optional)

3

Projector Overview

Projector Outlook

Front/upper side

1

 

 

 

4

 

1

 

 

4

2

 

 

 

5

 

2

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

6

 

 

 

 

2

 

 

 

 

2

3

 

 

 

7

 

3

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

8

 

(H7550ST/E155S/HE-815ST/

8

 

(H7550BD/E155D/HE-815J/

 

 

 

 

 

 

 

 

 

 

H1P1403/H7550STz/Z650/EG40S/

 

 

H1P1406/H7550BDz)

 

 

 

 

 

 

 

 

 

 

HG-80ST/Q1P1504)

 

 

 

 

 

 

 

 

#

Description

 

 

 

 

#

 

Description

 

1

Control panel

 

 

 

 

5 Focus ring and Zoom ring

 

2

Speaker

 

 

 

 

6

HDMI (MHL) connector

 

 

 

 

 

 

 

 

Micro USB cable

 

3

Elevator button

 

 

 

 

7

Projection lens

 

4 Power key and Power indicator LED

 

8

Remote control receiver

 

Rear side

 

 

 

 

 

 

 

 

 

1

2

3

4

5

6

7

8

 

9

10

11

12

13

#

Description

#

Description

1

RS232 connector

8

Audio input connector

 

 

 

Audio output connector

2

HDMI (MHL) connector

 

 

 

 

 

3

HDMI connector

9

Tilt adjusting wheel

 

 

 

 

4

Mini USB connector

10

Power socket

 

 

 

 

5

S-Video input connector

11

DC 5V out

 

Composite video input connector

 

 

 

12

Monitor loop-through

6

Analog RGB signal/HDTV/component

 

output connector

 

video input connector

 

 

 

 

 

 

7

Component Video inputs

13

Kensington™ lock port

 

 

 

 

English

English

4

Control Panel

 

 

1

 

 

 

 

 

 

 

7

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

8

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

#

Function

 

 

 

 

 

 

 

 

 

Description

1

LAMP

 

Lamp Indicator LED.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

POWER indicator

 

Refer to the "Turning the Projector On/Off" section.

 

LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Keystone

 

Adjusts image distortion caused by tilting projection.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

RESYNC

 

Automatically synchronizes the projector to the input

 

 

 

source.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

MENU

 

Launches the Onscreen Display (OSD) menu, returns to

 

 

 

the previous step for the OSD menu operation or exits

 

 

 

the OSD menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Power key

 

Refer to the "Turning the Projector On/Off" section.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

TEMP

 

Temp Indicator LED.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

SOURCE

 

Chooses RGB, component video, S-Video, composite

 

 

 

video, HDMI (MHL) or HDTV source.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

Four directional

 

Selects items or makes adjustments to your selection

 

selection keys

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

MODE

 

Chooses a display mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Remote Control Layout

(H7550BD/E155D/HE-815J/H1P1406/

 

H7550BDz/H7550ST/E155S/HE-815ST/

 

H1P1403/H7550STz)

(Z650/EG40S/HG-80ST/Q1P1504)

English

Model No:E-26371

 

 

MC.JMS11.001

 

 

 

#

Function

Description

1

POWER

Refer to the "Turning the Projector On/Off" section.

 

 

 

2

MEDIA SETUP

(No function)

 

 

 

3

ZOOM

Zooms the projector display in or out.

 

 

 

4

MODE

Chooses a display mode.

 

 

 

5

Keystone

Adjusts image distortion caused by tilting projection.

 

 

 

 

 

 

Four

Selects items or makes adjustments to your selection.

 

directional

 

 

selection

 

 

keys

 

 

 

 

6

Keypad 0~9

Press "0~9" to input a password in the "Setting" >

 

 

"Security" OSD.

 

 

 

7

VGA

To change source to VGA. This connection supports

 

 

analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and

 

 

YCbCr (480i/576i).

 

 

 

8

COMPONENT

To change source to Component video. This connector

 

 

supports YPbPr/YCbCr.

 

 

 

9

S-VIDEO

To change source to S-Video.

 

 

 

10

HDMI™/MHL

To change source to HDMI™ (or MHL). (for the model

 

 

with HDMI™ or MHL connector)

 

 

 

11

Infrared

Sends signals to the projector.

 

transmitter

 

 

 

 

12

FREEZE

To pause the screen image.

 

 

 

English

6

#

 

 

 

 

 

 

Function

Description

13

SOURCE

Chooses RGB, component video, S-Video, composite

 

 

 

 

 

 

 

 

video, HDMI (MHL) or HDTV source.

 

 

 

 

 

 

 

 

 

14

HIDE

Press "HIDE" to hide screen image; press again to

 

 

 

 

 

 

 

 

display the image.

 

 

 

 

 

 

 

 

 

15

MENU

Launches the Onscreen Display (OSD) menu, returns to

 

 

 

 

 

 

 

 

the previous step for the OSD menu operation or exits

 

 

 

 

 

 

 

 

the OSD menu.

 

 

 

 

 

 

 

 

 

16

PgUp/PgDn

For computer mode only. Use this button to select the

 

 

 

 

 

 

 

 

next or previous page. This function is only available

 

 

 

 

 

 

 

 

when connected to a computer via a USB cable.

 

 

 

 

 

 

 

 

 

17

VIDEO

To change source to composite video.

 

 

 

 

 

 

 

 

 

18

RATIO

Chooses an aspect ratio.

 

 

 

 

 

 

 

 

 

19

WIRELESS;

(No function)

 

LAN/WiFi

 

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

Rewind

(No function)

 

 

 

 

 

 

 

 

Play/Pause

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fast-forward

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

SD/USB A

(No function)

 

 

 

 

 

 

 

 

 

22

USB B

(No function)

 

 

 

 

 

 

 

 

 

23

3D

Press to open the 3D menu for adjusting 3D settings.

 

 

 

 

 

 

 

 

 

24

G

Chooses a display mode for game content from among

 

 

 

 

 

 

 

 

the following modes: Game Auto, Dark FPS, Bright FPS,

 

 

 

 

 

 

 

 

sRGB.

 

 

 

 

 

 

 

 

 

7

MHL Feature Introduction

When your smart device is connected to the projector, you can use some buttons on the remote control to control your smart device. Press "MODE" for one second to enter or leave the MHL control mode. After entering the MHL control mode, press "SOURCE" to switch between the navigation mode (default), media mode and numeric mode.

 

 

 

 

 

 

 

 

 

 

Description

 

#

 

 

 

 

 

 

Function

 

Navigation

Media mode

Numeric mode

 

 

 

 

 

 

 

 

 

mode

 

 

 

 

 

 

 

 

 

 

 

4

MODE

 

Long press for one second to enter or leave the

 

 

 

 

 

 

 

 

 

MHL control mode.

 

 

 

 

 

 

 

 

 

 

 

13

SOURCE

 

After entering the MHL control mode, press to

 

 

 

 

 

 

 

 

 

switch between the navigation mode (default),

 

 

 

 

 

 

 

 

 

media mode and numeric mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

Four

Up

Up

(No function)

(No function)

 

 

 

 

 

 

 

directional

 

 

 

 

 

down

down

(No function)

(No function)

 

 

 

 

 

 

 

select keys

 

 

 

 

 

Left

Left

Decreases the

(No function)

 

 

 

 

 

 

 

 

 

 

volume.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Right

Right

Increases the

(No function)

 

 

 

 

 

 

 

 

 

 

volume.

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Keypad 0~9

 

(No function)

(No function)

Enters 0~9.

 

 

 

 

 

 

 

 

 

 

 

 

15

MENU

 

Goes to the

(No function)

(No function)

 

 

 

 

 

 

 

 

 

root menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

Rewind

 

(No function)

Rewinds/Plays/

Enters 1.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Play/Pause

 

Selects or

Pauses/Stops/

Enters 2.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

enters items.

Fast-forwards

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stop

 

Exits current

Enters 3.

 

 

 

 

 

 

 

 

the playing

 

 

 

 

 

 

 

 

 

page.

 

 

 

 

 

 

 

 

 

 

 

media files.

 

 

 

 

 

 

 

 

Fast-forward

 

(No function)

(No function)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

Acer Z650, HG-80ST, HE-815ST, H7550ST, H7550STZ User Manual

English

8

Getting Started

 

 

Connecting the Projector

 

 

VGA

 

 

 

DVD player,

Video/S-Video

RS232

Output

Set-top box,

 

 

 

Display

HDTV receiver

 

Smartphone/

 

 

tablet

 

 

3

Speakers

2

1

 

 

 

2

 

 

 

1

#

Description

#

Description

1

Power cord

7

USB cable

2

VGA cable

8

3 RCA component cable

9

#

Description

#

Description

3

Composite video cable

9

HDMI (MHL) cable

4

Audio cable

10

WirelessHD dongle

5

S-Video cable

11

Wireless dongle

6

RS232 cable

 

 

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.

Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function.

Note: Compatible HDMI/MHL dongles: WirelessHD, MWA3, Android, ChromecastTM.

Turning the Projector On/Off

Turning On the Projector

1Ensure that the power cord and signal cable are securely connected. The Power LED will light red.

2Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue.

3Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically (when the Source Lock function is disabled).

If the screen displays "No Signal", please make sure the signal cables are securely connected.

If you connect to multiple sources at the same time, use "SOURCE" on the control panel or remote control, or the direct source key on the remote control to switch between inputs.

1 & 2

(H7550BD/E155D/HE-815J/ H1P1406/H7550BDz)

(H7550ST/E155S/HE815ST/H1P1403/ H7550STz/Z650/ EG40S/HG-80ST/ Q1P1504)

English

Loading...
+ 42 hidden pages