Acer 1916W, ET.L5209.005 User Manual

0 (0)

Table of Contents

Safety Rules

…………………………………………………………… 1

Electrical Safety

……………………………………………………………

1

Installation Safety

……………………………………………………………

1

Cleaning Safety

…………………………………………………………… 1

SPECIAL NOTES ON LCD MONITORS

…………………………………………………………… 1

Components and Accessories

…………………………………………………………… 2

Usage

…………………………………………………………… 2

Installation Guide

……………………………………………………………

2

Adjustment of Display

……………………………………………………………

3

Operation

…………………………………………………………… 4

Adjustment of Screen

…………………………………………………………… 6

Attachment

…………………………………………………………… 6

Plug and Play

…………………………………………………………… 7

Power Saver

…………………………………………………………… 7

Troubleshooting

…………………………………………………………… 7

Technical Specifications

……………………………………………………………

8

Display Mode

…………………………………………………………… 9

Safety Rules Note: To ensure your safety and prolong the life of the product, read the following safety rules

 

carefully when you use the product for the first time.

Electrical Safety

DO NOT touch the inside of the display. Only authorized and qualified technicians are

 

allowed to open the LCD display case.

 

Only hold the plug, not the power cable, when you connect the plug to the receptacle.

 

Make sure that your hands are dry without moisture.

 

Don’t expose your LCD display in the rain, water, or the environment with high

 

temperature or humidity, such as kitchens, surroundings of a swimming pool, any place

 

near flower vases, etc.)

 

If your LCD display operates abnormally, especially if there is smoke, noise or smell,

 

remove the plug immediately and contact our authorized dealer or service center.

Installation Safety

Don’t touch your LCD display with your fingers or any hard objects to avoid scratching

 

or leaving any oil sludge on the surface of the display

 

Install your LCD display at the place where the risk of dust contamination is low. Take

 

moisture-proof and ventilation measures to protect your LCD display.

 

Don’t install your LCD display near any heat source, such as kitchen tables, ovens, or

 

fire sources, or in the sun.

 

Install your LCD at the place where children will not touch it to avoid electric shock, or

 

dropping. Secure your LCD firmly or explain the safety rules to children, if required.

 

When installing your LCD display or adjusting its angle, attention shall be paid to the

 

loading capability and leveling of the display.

Cleaning Safety

Don’t spray or pour cleanser or water onto your LCD display or its case directly.

 

When cleaning your LCD display, make sure that no liquid permeates into the inside of

 

the LCD display or any accessory.

 

Moisten a clean and soft lint-free cloth with water, ammonia-free water, or glass

 

cleanser without alcohol, wrench it dry and wipe the surface of your LCD display gently.

 

It is recommended to use a silk cloth that is exclusively used to clean the display.

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

NOTES

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness on the screen depending on the desktop pattern you use. The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.

1

Acer 1916W, ET.L5209.005 User Manual
Components and Accessories

LCD Display

D-Sub Signal Cable

Quick Start Guide User’s Manual (CD-ROM)

Power Cable

DVI Signal Cable

(Optional)

Usage

Installation

Guide

Attention

Quick

Installation

Note: Read the [Safety Rules] section carefully before starting the installation

Before installing your LCD display, consider the following with reference to the space where the display is to be installed:

To minimize the reflection of the display, protect your eyes and ensure premium quality, don’t install your LCD display near windows or with backlight. Keep the display away from your eyes at least by 30 cm.

The upper edge of the display should be a little higher than your sight.

Adjust the front and back dip angles of the display based on your visual angle so that you can view the display comfortably.

Complete the following steps for quick installation: (See the figure)

Assemble the seat of the display

Take the seat out of the box and place it on a flat table.

Take your LCD display out of the carton and assemble the display and seat along the rail. You will hear a click sound when the display and seat are engaged correctly.

2

Loading...
+ 7 hidden pages