Manual for
Acer Projector XD1170/XD1270/XD1280 series
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it.
USA
For electronic products containing an LCD/CRT monitor or display, or a super high pressure mercury lamp:
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org.
Table of Contents |
|
Table of Contents.......................................................................................... |
1 |
Usage Notice................................................................................................ |
2 |
Precautions........................................................................................................... |
2 |
Introduction................................................................................................... |
4 |
Product Features................................................................................................... |
4 |
Package Overview................................................................................................ |
5 |
Product Overview ................................................................................................. |
6 |
Main Unit........................................................................................................................ |
6 |
Control Panel.................................................................................................................. |
7 |
Connection Ports............................................................................................................ |
8 |
Remote Control with Laser Pointer................................................................................. |
9 |
Installation................................................................................................... |
10 |
Connecting the Projector..................................................................................... |
10 |
Powering On/Off the Projector............................................................................ |
11 |
Powering On the Projector........................................................................................... |
11 |
Powering Off the projector............................................................................................ |
12 |
Warning Indicator.......................................................................................................... |
12 |
Adjusting the Projected Image............................................................................ |
13 |
Adjusting the Projector Image Height........................................................................... |
13 |
Adjusting the Projector Zoom / Focus.......................................................................... |
14 |
Adjusting Projected Image Size.................................................................................... |
14 |
User Controls.............................................................................................. |
15 |
Control Panel & Remote Control......................................................................... |
15 |
On-Screen Display Menus.................................................................................. |
19 |
How to operate ............................................................................................................ |
19 |
Color (Computer/Video Mode) ..................................................................................... |
20 |
Image (Computer/Video Mode).................................................................................... |
22 |
Management (Computer/Video Mode) ........................................................................ |
24 |
Audio (Computer/Video Mode) .................................................................................... |
30 |
Timer (Computer/Video Mode) .................................................................................... |
31 |
Language (Computer/Video Mode) ............................................................................. |
32 |
Appendices................................................................................................. |
33 |
Troubleshooting.................................................................................................. |
33 |
Replacing the lamp............................................................................................. |
37 |
Specifications...................................................................................................... |
38 |
Compatibility Modes............................................................................................ |
40 |
Regulation & Safety Notices........................................................................ |
41 |
... English
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit.
Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes.
Warning- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this may cause electric shock.
Warning- When changing the lamp, please allow unit to cool down, and follow all changing instructions.
Warning- This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows
warning messages.
Warning- Reset the “Lamp Hour Reset” function from the On Screen Display “Management” menu after replacing
the lamp module (refer to page 26)
Warning- When switching the projector off, please ensure the projector completes its cooling cycle before
disconnecting power.
Warning- Turn on the projector first and then the signal sources.
Warning- Do not use lens cap when projector is in operation.
Warning- When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this
happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp”.
English ...
Usage Notice
Do:
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the display housing.
Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Don’t:
Block the slots and openings on the unit provided for ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
-In extremely hot, cold or humid environments.
-In areas susceptible to excessive dust and dirt.
-Near any appliance that generates a strong magnetic field.
-Place in direct sunlight.
... English
Introduction
Product Features
This product is a SVGA (XD1170) / XGA (XD1270, XD1280) single chip 0.55” DLPTM projector.
Outstanding features include:
uTrue SVGA, 800 x 600 addressable pixels (for XD1170 series only)
True XGA, 1024 x 768 addressable pixels (for XD1270, XD1280 series only)
uSingle chip DLPTM technology
uNTSC3.58/NTSC4.43/PAL/SECAM and HDTV com- patible (480i/p, 576i/p, 720p, 1080i)
uHigh-tech DVI connection for digital signal with HDCP function and supports 480p, 576p, 720p and 1080i (Op- tional)
uFull function remote control with laser pointer (excluding
XD1170 series/Japan modes)
uUser friendly multilingual on screen display menu
uAdvanced digital keystone correction and high quality full screen image re-scaling
uUser friendly control panel
uSXGA+, SXGA compression and VGA re-sizing
uMac compatible
English ...
Introduction
Package Overview
This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing.
Projector with lens cap |
Power Cord 1.8m |
VGA Cable 1.8m |
Composite Video Cable |
USB Cable 2.0m |
S-Video Cable 2.0m |
1.8m |
|
|
Audio Cable Jack /Jack |
VGA to Component/ |
|
2.0m |
HDTV Adapter |
Remote Control |
2 x Battery |
Carrying Case |
User’s Guide |
Quick Start Card
... English
Introduction
Product Overview
Main Unit
1 2
|
4 |
3 |
7 |
5 |
4 |
|
|
|
6 |
8 |
9 |
1.Focus Ring
2.Zoom Ring
3.Zoom Lens
4.Remote Control Receiver
5.Elevator Button
6.Elevator Foot
7.Power Socket
8.Connection Ports
9.Control Panel
English ...
Introduction
Control Panel
5
4
6
3
7
21
1.Temp Indicator LED
2.Lamp Indicator LED
3.Power and Indicator LED (Power LED)
4.Source
5.Resync
6.Four Directional Select Keys
7.Menu
... English
Introduction
Connection Ports
1 |
2 |
3 |
4 |
5 |
6 |
For XD1170/
XD1270 only
10
8
1.DVI Input Connector (for Digital signal with HDCP function) (Op- tional)
2.PC Analog Signal/HDTV/Component Video Input Connector
3.Audio Input Connector
4.S-Video Input Connector
5.Monitor Loop-through Output Connector (VGA-Out)
6.USB Connector
7.RS232 Connector
8.KensingtonTM Lock Port
9.Composite Video Input Connector
10.5V DC Output Jack (for attached dongle device) (for XD1170/XD1270 only)
English ...
|
|
Introduction |
|||||||||
|
Remote Control with Laser Pointer |
|
|
|
|
|
|||||
|
1 |
|
|
|
|
|
24 |
|
|||
|
|
|
|
|
|
|
|
||||
2 |
|
4 |
|
|
|
|
|
|
|
25 |
|
|
|
|
|
|
|
|
|
|
|||
3 |
|
|
|
|
|
|
|
|
|
|
|
5 |
|
6 |
|
|
|
|
|
|
|
|
|
7 |
|
8 |
|
|
|
|
|
|
|
|
|
9 |
|
10 |
|
|
|
|
|
|
|
|
|
11 |
|
12 |
|
|
|
26 |
|
||||
|
|
|
|
|
|
|
|
||||
13 |
|
|
|
|
|
|
|
|
27 |
|
|
|
|
|
|
|
|
|
|
||||
|
|
16 |
|
|
|
28 |
|
||||
|
|
|
|
|
|
|
|
|
|
||
15 |
|
17 |
|
|
|
|
|
|
|
|
|
18 |
|
19 |
|
|
|
|
|
|
|
|
|
20 |
|
21 |
|
|
|
|
|
|
|
|
|
22 |
|
23 |
|
|
29 |
|
|||||
|
|
|
|
|
|
|
|
||||
for XD1170/Japan models series |
|
|
for XD1270/XD1280 series |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1. |
Laser Pointer |
15. |
Volume - |
|
|
|
|
|
|||
2. |
Power |
16. |
Page Up |
|
|
|
|
|
|||
3. |
Resync |
17. |
Page Down |
|
|
|
|
|
|||
4. |
Source |
18. |
VGA |
|
|
|
|
|
|||
5. |
Freeze |
19. |
S-Video |
|
|
|
|
|
|||
6. |
Hide |
20. |
Component |
|
|
|
|
|
|||
7. |
Aspect Ratio |
21. |
Video |
|
|
|
|
|
|||
8. |
Mute |
22. |
DVI |
|
|
|
|
|
|||
9. |
Keystone/Four Directional |
23. |
Language |
|
|
|
|
|
|||
|
Select Keys |
24. |
Laser Pointer Indicator |
||||||||
10. |
Back |
25. |
Laser Button |
|
|
|
|
|
|||
11. |
Menu |
26. |
Mouse Left Click |
||||||||
12. |
Digital Zoom |
27. |
Mouse Right Click |
||||||||
13. |
Empowering Key |
28. |
Mouse |
|
|
|
|
|
|||
14. |
Volume + |
29. |
Wireless |
|
|
|
|
|
|||
|
|
|
|
|
|
|
... English |
||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
Installation
Connecting the Projector
1
|
|
USB |
|
|
|
|
|
|
5 |
DVI |
VGA |
7 |
|
RS232 |
|
|
3 |
|
|
|
2 |
|
|
|
for XD1170/ |
|
|
9 |
|
|
|
|
||
|
|
|
|
|
XD1270 only |
|
|
|
|
|
10 |
|
|
|
DVD Player, Settop Box, |
6 |
|
|
|
|
|
|
||
HDTV receiver |
|
|
|
|
|
|
|
8 |
Video Output |
|
|
|
|
|
|
|
4 |
|
S-Video Output |
|
|
|
|
1...................................................................................................... |
Power Cord |
2..................................................................... |
DVI Cable (Optional Function) |
3....................................................................................................... |
VGA Cable |
4.................................................................................................. |
S-Video Cable |
5......................................................................................................... |
USB Cable |
6.......................................................... |
VGA to Component/HDTV Adapter |
7................................................................................... |
Audio Cable Jack/Jack |
8.................................................................................. |
Composite Video Cable |
9...................................................................................................... |
RS232 Cable |
10................................... |
5V DC Output Jack for attached Dongle Devicee |
|
(for XD1170/XD1270 only) |
|
|
|
|
v To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the
projector. Refer to the “Compatibility Modes” section on page 40.
English ... 10
Installation
Powering On/Off the Projector
Powering On the Projector
1.Remove the lens cap.
2.Ensure that the power cord and signal cable are securely connected. The Power LED will flash red.
3.Turn on the lamp by pressing “Power” button on the control panel.And the Power LED will turn blue.
4.Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.
vIf the screen displays “No Signal”, please make sure the signal cables are securely connected.
vIf you connect multiple sources at the same time, using the “Source” button on the remote control or control panel to
switch.
1Power
Turn on the projector first and then the signal sources.
11 ... English
Installation
Powering off the projector
1.Press the “Power” button to turn off the projector lamp, you will see a message “Please press power button again to complete the shutdown process. Warning: DO NOT unplug while the projector fan is still running.” displayed on the projector’s screen. Press the “Power” button again to confirm, otherwise the message will disappear after 5 seconds.
2.The cooling fans continue to operate for about 30 seconds for
cooling cycle and the Power LED will be quick red flash. When the Power LED becomes slow flashing, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press
“Power” button to restart the projector.
3.Disconnect the power cord from the electrical outlet and the projector.
4.Do not turn on the projector immediately following a power off procedure.
Warning Indicator
When the “LAMP” indicator lights solid red, the projector will
automatically shut itself down. Please contact your local reseller or service center.
When the “TEMP” indicator lights solid red for about 20 sec-
onds, it indicates the projector has been overheated. You will see a message “Projector Overheated. Lamp will automatically turn off soon.” on the on-screen display. The projector will automatically shut itself down.
Under normal conditions, the projector can be switched on again after it has cooled down. If the problem persists, you should contact your local dealer or our service center.
When the “TEMP” indicator flashs red for about 30 seconds, you
will see a message “Fan fail. Lamp will automatically turn off soon.” on the on-screen display. Please contact your local dealer or our service center.
English ... 12
Installation
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for adjusting the image height.
To raise the image:
1.Press the elevator button .
2.Raise the image to the desired height angle , then release the button to lock the elevator foot into position.
3.Use to fine-tune the display angle.
To lower the image:
1.Press the elevator button.
2.Lower the image, then release the button to lock the elevator foot into position.
3.Use to fine-tune the display angle.
1
Elevator
Button
2 |
3 |
Elevator Foot |
Tile Adjusting Wheel |
13 ... English