Accusplit AE120XLM User Manual

ACCUSPLIT®EAGLE

ACCUS

P

LIT

EAGLE

Di

g
iw

a
lkerX

L
.c

o

m

ST

EP

TIME DIS

T CA

L

SE

T

4728

MOD

E

RESE

T

S3

–

S1, S2,

S4

S3

+

12

0

XL

M

JW200

STEP TIME SET

DIGI-WAL KERXL.COM

120

XL

M

S3- S3+S1,S2,S4

JW200

ACCUSPLIT, Inc.

6120 Stoneridge Mall Rd., Suite 210

Pleasanton, CA 94588 USA

AE120XLM

PEDOMETER

800-965-2008 • 925-226-0888 • FAX [phone]

www.ACCUSPLIT.com • [e-mail]

Eat Right! Walk More! Live Well!

The ACCUSPLIT Lifestyle

Functions

• Step counter.

• Automatic Activity Timer.

• Trip and Total memories for Steps, and Activity Time.

For complete Function Specifications, go to page 29.

2

2 3

970-083
Sept 07

Operating Instructions

Key Features

• Built around the Japanese-made JW200 PedometerEngine™
Step Sensor, the current gold standard for accuracy.

• Extra Large Digits.

• The ACCUSPLIT exclusive case makes this the slimmest
available pedometer built around the JW200 Step Sensor.

• Chromed, Spring Steel clip resists breakage.

• Case includes two leash slots, for attaching safety leash
on either side. Made from tough polycarbonate plastic.

• Total Steps Memory counts to 10,000,000 steps!

• Step filter, can be set from 0-5 steps to further increase
accuracy.

HOW TO OPEN YOUR PEDOMETER

See diagrams at right.

The cover must be closed for the
pedometer to work.

USE IT NOW!

Your pedometer is preset with standardized settings
that allow you to use it now! You can customize the
settings later. Skip to pages 8-11 to use it now!

4

Getting Acquainted

• Press the MODE button to cycle through the display
modes (Steps, Activity Time).

Mode
indicator

See pages 11-12 and Specifications for details.

M

• Press MEMORY
between Trip and Total memory displays.

button to switch back and forth

See pages 12-14 for a complete explanation.

• The RESET button sets your counts back to zero.
See page 15 for details.

MODES

• STEP: STEP mode shows step count.

• TIME: AUTO ACTIVITY TIMER MODE shows total
activity time in min and sec.

6 7

RESET Button (yellow)

MEMORY Button

5

Steps
Counted

MODE Button

WEARING YOUR PEDOMETER

yes

no

STEP TIME SE T

DIGI-WAL KERXL.CO M

120

XL

M

S3- S3+S1,S2,S4

JW200

T

Gently slide the pedometer
onto your belt or the top

To avoid losing or dropping your pedometer, use the included
leash and clip to fasten the pedometer securely to your

clothing.
edge of your pants or skirt.
It should fit snugly and
level, above one knee. The
strong steel clip makes it
easy.

Note: The pedometer should be as vertical as possible.
Walkers with larger stomachs may find it helpful to
wear the pedometer farther back on the body, toward
one hip.

The cover must be closed for the pedometer to work.

8 9

Attaching the Leash

1. Attach the pedometer to the leash by looping the thin

side of the leash through one of the leash slots on the

sides of the pedometer case, near the bottom of the unit.

2. Put the pedometer onto your clothing as discussed above.

3. Attach the alligator clip to a belt loop or the top edge of the

pants or skirt.

Note: You can also use a safety pin to fasten the leash to

your clothing, loop the leash through your belt or belt

loop, or use a badge holder.

First, loop leash
through slot on side
of pedometer

VIEWING YOUR RESULTS

Once you put on your pedometer with the cover closed, it

will automatically begin to record your steps, activity time,

distance, and calories burned. Repeatedly press the MODE

Next, clasp clothing

button to cycle through the pedometer modes:

STEPS g TIME g STEPS

Time is counted automatically whenever steps are being

counted.

• TIME is time spent in step activity.

Or, loop a belt
or belt loop

10 11

Or, loop a

badge holder, then

put into pocket

(Badge holder

not included)

TOTAL vs. TRIP MEMORIES

This unit has two sets of memories – TRIP and TOTAL. The
TRIP memories are displayed in normal operating mode. We

Note: For extra accuracy, the default Step Filter Setting is 1.

See page 25 to learn more.

“T” lights when viewing

Total Memories

call them TRIP memories because they can be reset whenever
you want, just like the extra Trip odometer on most cars.

The Memory
button switches

The TOTAL Memories are provided as a way to keep track of
your progress over a long period of time. You may wish to
reset your total memories once per week, per month, per

between
Trip and Total
Memories

year, or never! It can be fun to see how many steps or how
much distance you walk in a long period of time.

The unit stores both Trip and also Total memories for Steps

Viewing Trip vs. Total memories

and Activity Time. As steps are taken, the unit increases the
values for both Trip and Total memories simultaneously.

13

To switch back and forth between viewing TRIP and TOTAL
memory, press the MEMORY button (“M”). You’ll see the “T”
icon (for Total) appear when displaying TOTAL memories. The
“T” icon disappears when displaying TRIP memory values.

In total step memory, the unit displays Steps ÷ 1,000. For
example, 500,00 0 steps displays as “500.0.” In this way, the
unit can display up to 10,000,000 steps.

14 15

RESETTING YOUR PEDOMETER

Resetting TRIP Memories

Most people prefer to reset counts daily. To reset your regular

counts (Trip Memories): From STEP or TIME mode, press and

hold the yellow RESET button for at least 2 seconds. You’ll see

the values all go back to zero. The TOTAL memories stay as

they are when resetting the TRIP memories.

Resetting TOTAL and TRIP Memories

To reset your TOTAL Memories (which always resets TRIP

Memories) , go into Total Memory Recall Mode. Press and

hold the yellow RESET button for at least 2 seconds to clear

BOTH TOTAL and TRIP memories.

OTHER SETTINGS

STEP TIME SET

DIGI-WAL KERXL.COM

120

XL

M

S3- S3+S1,S2,S4

JW200

The Step Filter setting is accessed through a special “deep
set” mode.

ACCUSPLIT products use a common setting procedure
known as “S1- S2-S3-S4.” Here’s how it works:

Press S1 for 2 seconds: Enter the SET mode
Press S2: Change the field to be set
Press S3: Change the field value
Press S4 for 2 seconds: Exit the SET mode

16

Can be set
from 0-5
steps

Set Step Filter set point

CHANGING STEP FILTER SETTING

While the JW200 PedometerEngine™ Step Sensor is extremely

accurate, some people like to have the ability to filter out false

steps. Therefore, the unit has a variable setting step filter, to

allow fine-tuning to your specific preferences. You can set the

value to any value from 0 – 5 steps. For example, if the filter is

set to “3”, the unit will wait to start counting steps until more

than three steps have been taken in less than five seconds.

Press and hold the S1 (MEMORY) button for 4 seconds. The

screen will display a single digit. Press S3+ (MODE) or S3–

(RESET) to change the Step Filter Setting. Press and hold S4

(Memory) for 2 seconds to exit Deep Set Mode.

Note: The unit will save any changes and exit set mode after

30 second unattended.

17

REPLACING THE BATTERY AND MASTER RESET

When the display starts to dim or goes blank, it is time to

replace the battery.

If the display is not uniformly dim or blank, and appears to

display “erroneous data”, do a Master Reset by pressing all

3 buttons simultaneously for 3 seconds and then release.

The display should go blank, then turn all segments on, then

display 0 steps in Step Mode.

Note: All the settings will return to their default setting values.

If you need to change the battery, the settings will also revert

to default settings.

18 19

To replace the battery:

1. Insert a coin into the slot on the
bottom of the case, and twist to
loosen the faceplate. Remove
faceplate and set aside.

2. Locate the battery holder as seen
on sketch. Pull out the old battery,
and push a new LR-44 battery into the holder,
with positive terminal (+) facing up.

3. Snap faceplate back into place, hooking the bottom
two tabs first, then closing by pressing together at the
top two tabs.

20

REGISTER NOW Please return

your AE120XLM Registration to
the Repair Center address in the
warranty, and we will let you know
about future products.

NO-PROOF-OF-PURCHASE LIMITED WARRANTY

$12 fee for service thereafter. See label inside unit for date.

Email (preferred)

User

Free service for first year of ownership;

See www.ACCUSPLIT.com/support for details

Battery

SPECIFICATIONS, FEATURES, and FUNCTIONS

Description of Functions

• Counts Steps up to 99,999 then rollover.

• Has a Total Memory for Steps that counts up to 99,999,999

steps, then rollover.

• Counts Time spent in step activity, up to 999 Min 59 sec,

then rollover. Automatically counts whenever step activity

is occurring.

• Has a Total Memory for Activity Time that counts up to

99,999 minutes, then rollover.

• Adjustable Step Filter (default setting is 1 step, but can

be set from 0-5 steps) to increase step count accuracy.

21

INDEX

Battery, replacing . . . . . . . . . . . . . . . . . . 19-20

Current day’s results, viewing . . . . . . . . . . .11

Memory, resetting . . . . . . . . . . . . . . . . . . . 15

Open your pedometer . . . . . . . . . . . . . . . . . 4

Safety Leash . . . . . . . . . . . . . . . . . . . . . . . 9-10

Setting up pedometer. . . . . . . . . . . . . . . . 6-11

Step Filter Setting, change. . . . . . . . . . . 16-18

TOTAL vs TRIP Memories . . . . . . . . . . . . 12-13

Wearing pedometer . . . . . . . . . . . . . . . . . . . 8

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

22

23