Abode Revolve User Manual

04/04/2019

-

This sheet

is a summary of the product information full details are available on request,

Product order code: (

AW5129

)

Fitting type:

•

Min. base unit (mm):

• Packaged size L x W x D: 460 x 460 x 230mm

• Supplied boxed or sleeved: Boxed

• Boxed weight: 3.68 kg

• Sink only weight: 2.16 kg

Included parts:

Undermount or Inset

800 together (500 indivdually)

Sink handing:

Revolve

Round Bowl & Drainer

Not handed

• Durable 304 stainless steel construction throughout

• Supplied with all parts required

• Easy clean bowl curves

• Can be fitted as undermount or inset

• Practical basket waste supplied

Finish style:

Satin/Brushed steel

1 X AX1005R (m)

90mm (1.5") Basic manual basket

strainer waste - short bolt - Multi ray

1 x 60mm (non sealing bsw)

1 X AX1114 (m)

Inset fixing clips x 10

Undermount stainless steel fixing clips

Recommended accessories:

Materials and workmanship warranty summary:

• Sink materials & workmanship 10 years.

• Waste kits 1 year.

• Connecting pipework 1 year.

1 X AX1112 (m)

1 X AX1006 (m)

Rectangular overflow pipework

1 X AX1108 (m)

x 8

Care instructions:

• Clean the products regularly using soapy water and a non
abrasive cloth, regular cleaning will prevent the build up
of lime scale and dirt.

• Avoid contact with corrosive or abrasive substances.

• After cleaning rinse thoroughly with clean water then dry.

• For more detail see supplied booklet or

www.abodedesigns.co.uk

1 X AX4043 (m)

Fitting & care instructions & data sheet

- st/st inset/undermount

2 X AX1113 (m)

Self adhesive strip seal (3 x 7 x

1800mm)

All accessories can be
purchased directly from
www.abode-shop.co.uk
or phone [phone]

errors & omissions excepted, details are subject to change without prior notification. www.abodedesigns.co.uk

04/04/2019

-

This sheet

is a summary of the product information full details are available on request,

Product order code: (

AW5129

)

Product dimensions and installation information:

note: symbol indicates position of acoustic pad on stainless products.

*Important, fabricator /
installer notes for
undermount &
flushmount sinks:

The cut out size indicated is
aligned with outside edge of
the bowl top radius (see
example below).

You should confirm with your
client if the worksurface cutout
is to be cut flush, inside or
outside this suggested
perimeter shape & size.

If you create the cutout smaller
or larger than the indicated
size then the fit of the
accessories may be affected
and should be physically
checked.

General:

All details are provided in good
faith but do not include the
tolerances of the material or
manufacturing process.

We request that a test cutout
is made in scrap timber and
checked against the actual
sink to be installed before
committing to cutting the
final worksurface.

Adittional notes: Important: Please check cut out details carefully before cutting worktops, size shown is flush to bowl edge
Overall product size: 435 x 435 x 170 corner radius 0mm

Taphole(s) detail: None
Compatability with large square taps:
Wastehole(s) detail (mm): 90 / 60 / N/A (nb. 90mm wastes accept a waste disposal unit)

Min. base unit (refers to space required for bowl, tap and overflow only): fits 800 together (500 indivdually)mm carcass
Min. Recessed fitting width: required (bowl(s), tap and overflow: Dependant on spacing mm
*Worktop cut out size: N/AxN/A corner radius N/Amm, for .DXF cut files please see www.abode.eu
Min. & Max worktop depth or clip depth reach range: 20 - 45mm
Fitting temple supplied? No, use cut out instructions as supplied
Dishwasher under drainer? Distance from top of worktop to underside of the drainer 5mm

Bowl details:

(sizes in mm unless specified otherwise)

Abode can not accept
liability for problems or
costs incurred by failure to
follow this request.

Note: the dimensions on
ceramic fireclay products are
subject to wider tolerances due
to the nature of this natural
material and the firing process.

CAD cutout files can be
downloaded from
www.abodedesigns.co.uk

Bowl 1 (typically main bowl): Bowl 2 (typically ½ or ¾ bowl): Bowl 3:

Bowl 1 size L x W x D (mm): 380 x 380 x 165 Bowl 2 size L x W x D (mm): 380 x 380 x 46 Bowl 3 size L x W x D (mm): N/A x N/A x N/A
Bowl 1 construction: Pressed, 0.60mm Bowl 2 construction: pressed, 0.60mm Bowl 3 construction: N/A, N/Amm
Bowl 1 floor radius (mm): 40 Bowl 2 floor radius (mm): 10 Bowl 3 floor radius (mm): N/A
Bowl 1 Wastehole diameter (mm): 90 Bowl 2 Wastehole diameter (mm): 60 Bowl 3 Wastehole diameter (mm): N/A
Bowl 1 overflow: Slotted, std equal pattern Bowl 2 overflow: N/A Bowl 3 overflow: N/A
Bowl 1 texture: Brushed stainless Bowl 2 texture: Satin/Brushed stainless Bowl 3 texture: N/A
Bowl 1 apx. volume (litres): 12.80 Bowl 2 apx. volume (litres): N/A Bowl 3 apx. volume (litres): N/A

errors & omissions excepted, details are subject to change without prior notification. www.abodedesigns.co.uk