Unpack
Make sure you have the following items in your 808 EarCanz
Sport package:
• 808 EarCanz Sport Bluetooth earbuds
• Micro USB charging cable
• Eartips in 3 sizes
• Travel pouch
If you have any questions about this product, visit
808Audio.com or call our toll-free help line at
1-800-732-6866.
1. Charge the EarCanz Sport
For best performance, we recommend you charge your
EarCanz Sport earbuds fully before using them.
Open the DC IN flap on the side
Right
earbud (side)
of the controls below the right
earbud.
Plug the included USB charging
cable into the charging jack behind
the DC IN flap.
Plug the other end of the charging
cable into a USB power source (like
a computer or a USB charger).
The indicator light on the front
of the controls turns red while
the earbuds are charging. It turns
blue when the earbuds are fully
charged.
2. Turn on the EarCanz Sport
Unplug the USB charging cable when
Right
earbud
(side)
To turn the EarCanz Sport o: Press and hold the button on the
controls for 3 seconds.
the earbuds are charged.
To turn on the EarCanz Sport and
start pairing to your Bluetooth
device: Press and hold the
on the controls for about 6 seconds
(until the indicator on the controls
starts blinking rapidly).
To turn on your EarCanz Sport
regularly: Press and hold the
button on the controls for 3 seconds.
The indicator on the controls starts
blinking slowly.
button
3. Pair + Connect
8:45PM
Wi-Fi
Wi-Fi Settings
Bluetooth
Bluetooth Settings
VPN Settings
Choose 808 EarCanz Sport from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan” from your
phone’s Bluetooth menu.)
IMPORTANT: If you’ve previously paired your phone or other Bluetooth
device with these earbuds, the earbuds will automatically attempt to
reconnect to that device when you turn them on. If you want to pair to a
new device, turn the earbuds o. Then press and hold the button on
the controls for about 6 seconds (until the indicator on the controls starts
blinking rapidly) to put the earbuds in pairing mode. Once the indicator on
the controls starts blinking, go to step 3 to pair and connect.
The earbuds beep when the process is complete. The indicator
on the controls turns solid blue.
Enable Bluetooth on your smartphone or
other device.
Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and
specific instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• The earbuds’ Bluetooth wireless connection works up to a range of roughly
33 feet (10 meters). This range may vary, however, based on other factors,
such as room layout, wall material, obstacles, your device’s Bluetooth
performance, etc. If you’re having problems connecting to the earbuds,
move closer to your phone.
• Make sure your device supports audio transfer A2DP.
• If your device asks you for a password to connect, use “0000”.
To pair the EarCanz Sport again
After turning your earbuds back on, they automatically
attempt to reconnect to the last connected device. If the
last connected device is not available, the earbuds will enter
pairing mode and be ready to pair to a new or dierent device.
Using the EarCanz Sport
Putting the EarCanz Sport in your ears
The EarCanz Sport earbuds come with medium-sized eartips
installed. You can use dierent-sized tips, but first try them
with the mediums.
Find the L and R markings on the
buds—place the cord behind your
neck with the L bud on the left and
R bud on the right.
Place each earhook over each ear
as as shown here. Then place each
tip in each ear. Finally, bend each
earhook so that it fits snugly over
the outside of each ear with the
tips in place.
If the tips don’t fit, follow the directions in the next section to
change them.
Changing the eartips
If you want to use dierent size eartips, remove the preinstalled eartips from each earbud. Then find the pair in the
size you want, and push each tip onto each bud until it’s
secure.
Listening to music
Set your device’s volume for music to 50%.
8:45PM
Now playing
Media volume
Note: This is to make sure the sound from the
earbuds isn’t too loud when you start streaming.
Start playing music or other audio on
your device. Within seconds, the earbuds
start streaming the audio wirelessly via
Bluetooth.
Controlling playback and volume
The control panel near the right earbud lets you
control music playback and volume wirelessly.
To play/pause music: Press the
To adjust volume: Press the or button.
To go to the previous/next song: Press and
hold the or button.
button.
Answering/ending phone calls
The earbuds’ control panel has a built-in microphone, so
you can use the EarCanz Sport for phone calls. Your phone
will ring through the earbuds when you’re receiving a
call. You can answer and end the call wirelessly from the
control panel.
To answer or end a phone call: Press the
To decline a phone call: Press and hold the
IMPORTANT: Not all phones support playback control and phone answer/
end control. Check your phone’s user manual for more information if you’re
having trouble with these functions.
button.
button.
SPORT
WIRELESS EARBUDS
quick start guide
HPA215 QSG 01
Loading...