Size:
1.13 Mb
Download

User Manual

Innovative LCD Display Solutions

AP—10AV Series

DP—10AV Series

OP—10AV Series

UMUV.10-045V2

AP-10AV / DP-10AV / DP-10AV Series

User Manual

1. Table of Content

1. Table of Content

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.1

2.Introduction

A)

Overview

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.2

B)

Features

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.2

C)

Dimension Diagrams

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.3-5

D)

Technical Specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.6

3.Installation

A)

Package Contents

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.7

B)

Caution to the user

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.7

C)

Cleaning

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.7

D)

Precautions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.8-9

4.Using the System

A)

Product Views

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.10-12

B)

I/O Outlet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.13

C)

Installation Procedures

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.14

D)

Setup Touchscreen (Optional)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.15

 

i)

For Windows

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.15

 

ii)

For DOS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.16-18

E)

OSD Switch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.19

F)

OSD Control (VGA Version)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.20-22

G)

OSD Control (Video Version)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page.23-27

Apr 05

P.1

AP-10AV / DP-10AV / DP-10AV Series

User Manual

2. Introduction

A.Overview

This LCD monitor incorporates 10.4”color active matrix thin-film-transistor

(TFT) liquid crystal display to provide superior display performance. A maximum resolution of 800 x 600 is ideal for displaying complex graphics and high definition images. Other outstanding designs that enhance this LCD monitor’s performance are Plug & Play compatibility and OSD (On Screen Display) controls.

B.Features

High contrast color TFT LCD display support resolution up to 800 x 600.

Advanced OSD control for picture quality adjustment.

Detachable stand for wall-mounting application.

Optional Composite and S-Video input

Slim and compact size

Wide Viewing Angle

Disclaimer

This information is subject to change without notice. The producer of this manual accepts no responsibility for damage or claims, resulting from misuse or misinterpretation

Apr 05

P.2

AP-10AV / DP-10AV / DP-10AV Series

User Manual

2. Introduction

C.Dimension Diagrams

AP-10AV series

Apr 05

P.3

AP-10AV / DP-10AV / DP-10AV Series

User Manual

2. Introduction

C.Dimension Diagrams

DP-10AV series

Apr 05

P.4

AP-10AV / DP-10AV / DP-10AV Series

User Manual

2. Introduction

C.Dimension Diagrams

OP-10AV series

Apr 05

P.5

AP-10AV / DP-10AV / DP-10AV Series

User Manual

2. Introduction

Technical Specifications

 

Panel

 

10.4" LCD Panel

 

Display Type

 

TFT LCD active matrix colour

 

Resolutions

 

800 x 600

 

Response Time

 

Tr=15ms, Tf=25ms

 

Contrast Ratio

 

180:1 typical

Monitor

Brightness

 

350 cd/m2 typical

Pixel Pitch

 

0.264(H) x 0.264(V)

 

 

 

Panel Colour

 

262,144 display colour

 

Viewing Angle

 

60 / 60 / 55 / 40 (L / R / U / D)

 

Storage Temp.

 

-20° to 60°C

 

Operating Temp.

 

0° to 50°C

 

MTBF

 

50,000 hours

 

Remote Adapter

 

110V - 220V AC Input

 

Adapter Size

 

108(L) x 60 (W) x 30(D) mm

Power Supply

Cable Length from

 

182cm

mains plug to adapter

 

 

 

 

Cable Length from

 

180cm

 

adapter Unit

 

 

 

 

 

Power Socket

 

12V (+) female

 

RCA

 

Composite video input (female) x 1

Connectors

S-Video

 

MiniDIN 4-pin (female) x 1

 

VGA

 

HDDB 15-pin (female) x 1

Video

Standards

 

Supports NTSC, PAL or SECAM

Product

AP Series : 275(W) x 215(H) x 51(D) mm

DP Series : 258.5(W) x 198.5(H) x 42.7(D) mm

Dimension

OP Series : 285(W) x 225(H) x 41(D) mm

 

 

 

 

 

Packing

AP / DP / OP Series : 480(L) x 362(W) x 85(H) mm

Dimension

 

 

 

Net / Gross

AP Series : 2.5 / 4.5 Kg

 

DP Series : 2 / 4 Kg

 

Weight

 

OP Series : 2 / 4 Kg

 

 

 

 

 

 

 

Apr 05

P.6

AP-10AV / DP-10AV / DP-10AV Series

User Manual

3. Installation

A.Package Contents

After unpacking the carton, check and see if the following items are included in good condition. Contact your supplier as soon as possible for replacing the missing / damaged items.

10.4” TFT LCD monitor

RCA Cable (Optional For AV Version only)

S-Video Cable (Optional For AV Version only)

VGA Cable (Male to Male)

DC 12V Adapter (5A)

Power Cord

Mounting Bracket (AP Series only)

User Manual

CD Disc

B.Caution to The User

To assure continued FCC compliance, please use grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded BNC (5) cable. Also,

The Federal Communications Commission warns the user that any unauthorized changes or modifications to the unit if not expressly approved by the party responsible for compliance could void the user's authority of operating the equipment.

C.Cleaning

1.Gently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth. This removes dust and other particles that can scratch the screen.

2.Do not apply excessive pressure to the screen surface when wiping it clean because this may damage the LCD.

3.Do not pour or spray any liquid directly onto the screen or case of the LCD monitor. Chemical cleaners have been reported to damage the screen or case of the LCD monitor.

Apr 05

P.7

AP-10AV / DP-10AV / DP-10AV Series

User Manual

3. Installation

D.Precautions

Read all of these instructions and save them for later use. Follow all warnings and instructions on the product.

Product

Do not cover or block the vent holes in the case.

Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They may cause accident fire, electric shock or failure.

Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time.

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.

Do not touch the screen directly with your fingers. You may damage the screen, and oil from your skin in difficult to move.

Do not apply pressure to screen. The LCD is very delicate.

Power

1. Use the type of power indicated on the marking label.

Plugs

1.Do not remove any of the prongs of the monitor’s three-pronged power plug.

2.Disconnect the power plug from the AC outlet under following conditions

If the product will not be used for an indefinite period time.

When the power cord or plug is damaged or frayed.

If the product does not operate normally when the operating instructions are followed.

Adjust only those controls that are covered by the operating

instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

If the product has been dropped or the cabinet has been damaged.

If the product exhibits a distinct change in performance, indicating a need for service.

Apr 05

P.8

AP-10AV / DP-10AV / DP-10AV Series

User Manual

3. Installation

D.Precautions (Cont.)

Power and extension cords

1.Do not allow anything to rest on the power cord.

2.Do not locate this product where persons will walk on the cord.

3.Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country’s safety regulations, such as

VDE for Germany.

4.Do not overload wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet does not exceed 10 amperes.

5.Ensure that the total ampere ratings on all units plugged into the extension cord is not above the cord’s rating.

6.If the power supply cord, which came with your monitor, is to be connected to the PC instead of the wall outlet, this equipment is to be used with UL/TÜV approved computers with receptacle rated

100~240V AC, 50/60Hz, 1.0A(minimum).

Environment

1.Place the monitor on a flat and leveled surface.

2.Place the monitor in a well-ventilated place.

3.Keep the monitor away from Overly hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment that generate strong magnetic fields.

Apr 05

P.9

AP-10AV / DP-10AV / DP-10AV Series

User Manual

3. Installation

A.Product Views

AP Series - Front View

AP Series - Rear View

Apr 05

P.10

AP-10AV / DP-10AV / DP-10AV Series

User Manual

3. Installation

A.Product Views (Cont.)

DP Series - Front View

DP Series - Rear View

Apr 05

P.11

AP-10AV / DP-10AV / DP-10AV Series

User Manual

3. Installation

A.Product Views (Cont.)

OP Series - Front View

OP Series - Rear View

Apr 05

P.12

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

B.I/O Outlet

AP Series

DP Series

OP Series

(1)

(2)

(3)

(4)

(5)

(6)

1.DC IN Connect to DC power cable.

2. PC IN Connect to D-Sub 15 pin signal connector.

3.RCA IN Connect to the composite cable connector. (for AV series only)

4.S-Video IN Connect to the S-Video cable connector. (for AV series only)

5.USB IN Connect to the USB connector. (for Touchscreen series only)

6.SERIAL IN Connect to the Serial connector. (for Touchscreen series only)

Apr 05

P.13

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

C.Installation Procedures

This monitor is equipped with an auto-sensing power supply for voltage ranges 100~240V, 50~60Hz. Please follow the following instruction to install LCD monitor.

1.Make sure that the system power is turned off.

2.Plug the signal cable to the signal connector at the rear of PC and the rear of the LCD monitor.

3.Plug adapter output cable to the jack at the rear of LCD monitor and the power cord to the adapter.

4.Connect the power cord to power source.

5.Turn on the computer and the monitor.

6.Then push the OSD menu button and use the Auto Adjust function to fine the best mode of your computer.

Apr 05

P.14

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

D.Setup Touchscreen

Touchscreen used for UltraView products are manufactured by 3M. Here provide

TouchWareTM Software includes touch screen drivers for your installing.

Note: To configure the settings of the touchscreen, please refer to the

TouchWareTM User Guideline

Note: If you have a Microsoft® IntelliPoint® or Kensington® Mousework® PS/2 mouse, installing TouchWareTM software will disable the special mouse functionally of these devices

For Windows 95, 98, Me, NT4.0, 2000 & XP

1.Open the driver CD provided along with the product or download the driver from our Website.

2.Make sure you have completed the appropriate hardware connections.

3.Power on your system. Make sure no other application are opened.

4.Double click the “TW564SR4.exe” files.

5.Unzip the file and save it in a default folder

Note: Remember the path of the default folder or create a new folder by your decision.

6.Follow the onscreen instructions to begin the installation.

Note: Choose Express option for automatically installs the required TouchWareTM software files, create a TouchWareTM software program fil es, and pl ace a TouchWareTM software icon on the Windows desktop and control panel. TouchWareTM will also determine multiple monitor configurations at this time.

Note: For details of Custom option, please refer to the website of 3M and download the user guide of TouchWareTM software.

(http:// www.3m.com/3MTouchSystems/downloads/tecdoc.jhtml)

Apr 05

P.15

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

D.Setup Touchscreen

For Windows 95, 98, Me, NT4.0, 2000 & XP (Cont.)

7.Once installation is complete, restart the system. As the system restarts,

Windows detects and loads the driver.

For serial controllers, restart the system. As the system restarts, Windows detects and load the driver

Note: This step is not necessary for Windows 2000 or above system, The driver loads automatically.

For USB controllers, connect the touch screen cable to the USB port in your computer. After a few seconds, the system beeps to indicate it has detected the touch screen and loaded the driver.

For DOS

When you install Touchware from DOS, the Install program only loads the touchscreen files specific to DOS. The installation includes the following files:

Touchscreen driver for DOS

Touchscreen control panel for DOS

Pen Configuration utility for DOS

Microcal Diagnostic utility

ThruGlass control panel for DOS

DOS help files

If you do not plan to use any of the touchscreen files for windows, you may want to install just the DOS touchscreen files.

1.Open the driver CD provided along with the product or download the driver from our Website.

2.Make sure you have completed the appropriate hardware connections. If not, the Install program cannot properly configure the touchscreen.

3.Close all applications and exit from Windows.

4.Insert the TouchWare Disk into a diskette drive.

5.Access the DOS command line prompt.

6.Change to the drive that has the TouchWare diskette. For example, enter A:

if you inserted the TouchWare diskette in Drive A.

Apr 05

P.16

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

D.Setup Touchscreen

For DOS (Cont.)

7.Type INSTALL followed by the source disk drive, the destination drive, and the destination directory.

For example, the following command copies the files from Drive A (source drive) to Drive C (destination drive) and the \MTS\TOUCH directory :

INSTALL A: C:\MTS\TOUCH

8.Press Enter. The system reports that it is about to copy the DOS touchscreen files and prompt for confirmation that you want to continue.

9.Press C to start the installation.

First, the Install program copies all DOS touchscreen files from the TouchWare diskette to the specified destination drive and directory.

Next, the Install program automatically searched through the system and configures the touchscreen to the proper COM port, interrupt, and communication rate.

Finally, the Install program prompts if you want it to automatically modify your AUTOEXEC.BAT file

If you let the Install program modify your AUTOEXEC.BAT file, the system automatically loads the DOS touchscreen driver whenever you start your computer.

If you do not let the Install program modify your AUTOEXEC.BAT file, you must load the DOS touchscreen driver before using a DOS touch application. For more information, refer to “Loading the DOS Touchscreen Driver” in the next page

Apr 05

P.17

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

D.Setup Touchscreen

For DOS (Cont.)

Loading the DOS Touchscreen Driver

After you install the files for the DOS touchscreen driver, you must load the driver before you can run a DOS touch application or open the DOS Touchscreen control panel.

You can run the DOS touchscreen driver from a full-screen DOS session within

Windows. However, the Windows touchscreen driver cannot be running. Error message reads: “Windows x.x is running in 386 Enhanced mode. Device not found.”

This means either the Windows Touchscreen driver is loaded or the COM port/ IRQ designations are incorrect.

You can manually load the DOS touchscreen driver when needed, or you can let the system automatically load the driver when you start up your computer.

To manually load the DOS touchscreen driver:

1.Close all applications and exit from Windows.

2.Access the DOS command line prompt.

3.Use the Change Directory (cd) command to switch to the directory that has the DOS touch driver files. By default, the Install program loads

TouchWare into the C:\MTS|TOUCH directory.

4.Type DOSTOUCH and then press Enter. The system displays a message that the driver is now installed. For example:

MicroTouch Mouse Emulator - Version x.x

Copyright © 1990 - 1997 MicroTouch Systems, Inc.

Driver Installed

To automatically load the DOS touchscreen driver when you start up your computer, add the following line to your AUTOEXEC.BAT file :

drive-designator :\directory\DOSTOUCH

where drive-designator and directory define the location (disk and path) of the files for the DOS touchscreen. For example:

Apr 05

P.18

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

E.OSD Switch

Power Menu/Selection

Left

 

 

Right

 

 

Exit

 

Input Select:

This button is used to select CVBS for composite

 

 

 

 

video input, RGB for VGA input and S-Video for

 

 

 

 

Super-Video input

OSD Menu:

 

This button is used to enter OSD main Menu

Increase(à):

This button is used to adjust the increasing or

 

 

 

 

next value of selected OSD control option.

Decrease(ß):

This button is used to adjust the decreasing or

 

 

 

 

next value of selected OSD control option.

Power Switch:

This button is used to power ON/OFF the LCD

Apr 05

P.19

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

F. OSD Control For VGA Input Vesion

LCD Membrane Diagram

Power

 

Menu/Selection

 

 

 

Left

 

Right

 

Exit

 

 

 

 

 

 

 

 

 

 

MAIN MENU

BRIGHT/CONTRAST

AUTO ADJUST

PHASE/CLOCK

H/V POSITION

MISC

RESET

Main Menu

Bright / Contrast

To enter into the Bright, Black level & Contrast sub-menu

Auto Adjust

To perform automatic optimisations of all functions

An “ Adjusting” message is displayed during the process

Phase / Clock

To enter into the phase & clock sub menu

H/V Position

To enter into the Position sub-menu

MISC

To enter into the MISC sub-menu

Reset

Reset to the default factory settings

Apr 05

P.20

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

F.OSD Control For VGA Input Version

Bright / Contrast

1.Brightness

To perform brightness adjustment of the input RGB signal

Use the Left & Right button to adjust and button to “Brightness”

2.Contrast

To adjust the contrast level of the input signal

Use the Left & Right button to adjust and button to “Contrast”

Phase / Clock

1.Phase

To adjust input video sampling clock’s phase

Use the Left & Right button to adjust and button to “Phase”

2.Clock

To adjust input video sampling clock

Use the Left & Right button to adjust and button

to “Clock”

H/V Position

1.H.Position

To adjust the horizontal size of the frame

Use the Left & Right button to adjust and button to “H.position”.

2.V.Position

To adjust the vertical position of the frame

Use the Left & Right button to adjust and button to “V.position”.

Apr 05

P.21

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

F. OSD Control For VGA Input Version

MISC

1.Information

The first header row shows the current resolution setup

The second header row shows the horizontal frequency of the current input signal

The third header row shows the vertical frequency of the current input signal

2.OSD Timer

To modify the duration of the OSD time-out

3.Color

a)5500K

Select Colour Temp at 5500K

b)6500K

Select Colour Temp at 6500K

c)9500K

Select Colour Temp at 9500K

d)User

Change Colour Temp by manual

4.Language

To select the language of OSD menu 7 Languages :

(1) English

(2) Japanese ( )

(3) Chinese ( )

(4) German

(5) Francais

(6) Espanol

(7) Italiano

Apr 05

P.22

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

G.OSD Control For Video Input Version

Colour Configuration Page

Colour

Brightness

Contrast

Colour Adjust

Exit

Brightness

Adjust the brightness value from 1 to 100 using (à) and (ß) buttons.

Contrast

Adjust the contrast value from 1 to 100 using (à) and

(ß) buttons.

Colour Adjust

Select the colour temperature option for

9300K

or 6500K

or RGB

Exit

Exit the Colour configuration Page

Apr 05

P.23

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

G.OSD Control For Video Input Version

Picture Configuration Page

Picture

H.Position

V.Position

Sharpness

Phase

Clock

Exit

H.Position

Press (à) shifting display image to right with value from 0 to 100;

Press (ß) shifting display image to left from value 0 to 100.

V.Position

Press (à) shifting display image to upward with value from 0 to 100;

Press (ß) shifting display image to downward from value 0 to 100.

Sharpness

Adjust the sharpness of the S-Video and CVBS image with 5 levels

Phase

Adjust the phase of PPL clock by using (à) and (ß) buttons

Clock

Adjust clock rate to improves colour display by using (à) and (ß) buttons

Exit

Exit the Picture configuration Page

Apr 05

P.24

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

G.OSD Control For Video Input Version

Function Configuration Page

Function

Auto Adjust

Auto Position

Auto Phase

Auto Clock

Exit

Auto Adjust

Enable or disable function for auto adjusting brightness, contrast, color etc.

Yes Enable

No Disable

Auto Position

Enable or disable function for auto adjusting horizontal position or vertical position

Yes Enable

No Disable

Auto Phase

Enable or disable function for auto adjusting physical voltage to improves focus, clarity and image stability

Yes Enable

No Disable

Auto Clock

Enable or disable function for auto adjusting to clock rate to improves colour display.

Exit

Exit the Function configuration Page

Apr 05

P.25

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

G.OSD Control For Video Input Version

OSD Menu Configuration Page

OSD Menu

Language

OSD H.Position

OSD V.Position

OSD Timer

Translucent

Exit

Language

Change language of OSD Menu for English or traditional Chinese

OSD H.Position

Press (") shifting OSD Menu to right with value from 0 to 100;

Press (!) shifting OSD Menu to left from value 0 to 100.

OSD V.Position

Press (") shifting OSD Menu to upward with value from 0 to 100;

Press (!) shifting OSD Menu to downward from value 0 to 100.

OSD Timer

Enable or disable timeout of OSD Menu

ON Enable OFF Disable

Translucent

Enable or disable for the diaphaneity of OSD menu

Yes Enable

No Disable

Exit

Exit the Function configuration Page

Apr 05

P.26

AP-10AV / DP-10AV / DP-10AV Series

User Manual

4. Using the System

G.OSD Control For Video Input Version

Miscellaneous Configuration Page

Miscellaneous

Mode Select

Reset

Exit

Mode Select

Switch the display size for 640 x 400 or 720 x 400 in DOS mode

Reset

Enter for reloading all factory default

Exit

Exit the Function configuration Page

Apr 05

P.27