Size:
78.27 Kb
Download

3

Thin Flexographic Mounting Tape 2205

Easy Mount System

For use in flexographic printing on corrugated board.

The tape that’s easier to apply — and easier to remove.

Features

Benefits

Micro-channeled adhesives, a proprietary 3M technology

Greatly reduces air entrapment, saving time

 

and improving print quality on press

Adhesives designed specifically for corrugated flexo mounting

High holding power to keep plate securely mounted to carrier

Eliminates need for liquid adhesives

Tape removes cleanly from both plate and carrier

Plate and carrier can be reused

Easy to reposition

Saves time and reduces waste in plate mounting

Our Easy Mount System Advantage

An exclusive crosshatched pattern in the liner creates a series of microchannels throughout both adhesive layers of the double-coated tape.

3MThin Flexographic Mounting Tape 2205

Traditional Liner

(Enlarged view of plate mounted on carrier)

(Enlarged view of plate mounted on carrier)

Our Removability Advantage

2205 Tape provides clean removability from both plate and carrier, allowing for reuse of both.

3MThin Flexographic Mounting Tape 2205

Traditional Adhesive System

Visit www.3m.com/flexo for more information or contact your 3M representative.

IMPORTANT NOTICE: 3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s method of application. Please remember that many factors can affect the use and performance of a 3M ITSD product in a particular application. The materials to be used with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M ITSD product. Given the variety of factors that can

affect the use of a 3M ITSD product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M ITSD product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

LIMITATION OF REMEDIES AND LIABILITY: If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AND 3M'S SOLE OBLIGATION SHALL BE, AT 3M’S OPTION, TO REFUND THE PURCHASE PRICE OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including but not limited to, contract, negligence, warranty, or strict liability.

3

Industrial Tape and Specialties Division

 

3M Center, Building 220-7W-03

 

St. Paul, MN 55144-000

 

1 800 362 3550

 

www.3m.com/flexo

Copyright © 2002, 3M IPC. All rights reserved. 70-0709-5272-9