3M PANELSAFE LOCKOUT SYSTEM BROCHURE User Manual

526.89 Kb
Loading...

3MTM PanelSafeTM Lockout System

3Innovation

Lock in Safety with 3MPanelSafeLockout System

3M’s PanelSafe Lockout System mechanically prevents the movement of breaker handles from the “off” position to the “on” position with energy isolating lockout pins. With PanelSafe, 3M is dedicated to helping you meet applicable OSHA regulations, which require all electrical circuits to be “locked out” prior to the servicing and maintenance of machines, lighting and equipment. 3M PanelSafe Lockout System complies with OSHA Standard 1910.147.

The unit, supplied with pre-drilled mounting holes, fastens directly to the service panel dead-front using self-tapping screws. The energy isolating lockout pins are stored in a holding device also attached to the dead-front by means of self-tapping screws, making the entire assembly and its accessories completely contained behind the panel door. Those authorized to perform a lockout function need only carry their lock and tag.

In your business, power, technology and reliability are essential. 3M delivers that and more.

We have the power of a diversified, global manufacturer with more than 60,000 products in our line; a reputation for technical excellence and innovation; and employees committed to delivering

quality products and service to you, our valued customer.

Our capability doesn't stop with electrical products,

it starts there.

To explore the many ways we can serve you, contact your 3M representative today!

A permanently installed circuit breaker lockout system, 3M PanelSafe is designed with pre-spaced slots that correspond to the center point of the service panel breaker handles. The unit is properly positioned when the center of each pin slot is aligned with the center of each breaker handle. Once installed, 3M PanelSafe, which fits all brands and models, completely eliminates the

need for employees to constantly carry numerous lockout devices each designed to fit a specific manufacturers panel and breaker type.

For the ultimate flexibility, a standard pin package includes both single-sided and dual-sided pins for simultaneously locking off multiple circuits. Additionally, the package contains a hook pin designed for use in situations where protecting against a nuisance turn-off of dedicated or passive circuits is critical. Such applications may include fire suppression systems, emergency lighting and computer systems.

The use of 3M PanelSafe will increase safety as well as help reduce costs.

3MPanelSafeLockout System Accessories

3Moffers various pins, shims and brackets, so that the PanelSafe Lockout System can be used, even if the panel front is not flat.

One Way Pin

A one way pin is used to lockout an individual circuit located on either the left or right side of the panel. Available 5 per package

or bulk, 15 per package.

Two Way Pin

A two way pin is used to lockout two circuits directly opposite each other. Available 5 per package or bulk, 15 per package.

Hook Pin

The hook pin can be used to secure “on” individual circuits (i.e. dedicated passive circuits), or to lockout individual circuits from either the left or right side of the panel. Available 5 per package

or bulk, 15 per package.

PS-SP Spade Pin

A spade pin is used to lockout on either the left or right side of the panel when the measured distance from the center line of the dead front to the max position on the breaker handle in the off position is greater than 2 1/2". Available 5 per package or bulk, 15 per package.

PS-SP05 Half-size Spade Pin

The half size spade pin is used to lockout half-size (twin or piggyback) breakers. This pin can lockout an individual circuit by simply rotating the pin 180° for either the top or the bottom breaker. Available 5 per package or bulk, 15 per package.

Cup Pin

The cup pin is used to secure “on” individual circuits (i.e., dedicated circuits) located on either the left or right side of the panel. Available 5 per package or bulk, 15 per package.

Pin Holder

Stores all pins, (except main breaker pin) at each panel location for easy access when lockout functions are required.

Standard Shim

On distribution panels where the body of each breaker extends out beyond the level of the dead front, the standard shim is used to raise the surface, where a 3MPanelSafe unit is mounted, level with the body of each breaker. Available only in pairs.

2-1/2"

PS-1P

2-1/2" 2-1/2"

PS-2P

3"

PS-HP

3-1/2"

PS-SP

3-1/2"

PS-SP05

3"

PS-CP

PS-PH

1/8"

PS-SH1

+ 5 hidden pages