Size:
178.43 Kb
Download

Application Profile

Market: Household Appliance

Application Description: Bonding copper heating coils to the refrigerator plastic drip pans.

WATER

 

ICE

CUBES

 

3MScotch-Weld Hot Melt Adhesive 3796

Copper Heating Coils

Key Application Requirements

PRODUCT

Fast set time, secure bond to plastic and copper, easy to apply and temperature

3MScotch-Weld Hot Melt

resistant (up to 160ºF).

Adhesive 3796

 

3MScotch-Weld Hot Melt

Product or Process Replaced

Applicator PG II

Hand-applied tabs of masking tape.

 

Benefits/Advantages To Customer

 

Easy to use/quick to apply: 3MScotch-Weld Hot Melt Adhesive 3796 is

 

dispensed through the 3MScotch-Weld Hot Melt Applicator PG II. No

 

metering, mixing or curing equipment is required. The fast set time of the

 

adhesive makes the system ideal for the production rates of the manufacturer.

 

Long-lasting: Specially-formulated adhesive provides an adequate bond

 

between the coils and the pan.

 

Resists environmental conditions: The adhesive withstands the elevated

 

temperatures of the heat/evaporation process (up to 160ºF) during the operation

 

of the refrigerator.

 

3M Industrial and

Transportation Business

SIC Code

3632 – Household Refrigerators and Freezers

Key Decision Makers

Product Manager

Design Engineer

Plant Manager

Production Manager

For Additional Information

To request additional product information or to arrange for sales assistance, call

 

1-800-362-3550. Address correspondence to: 3M Industrial Business Customer

 

Response Center, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55106. Our

 

fax number is 651-733-9175. In Canada, phone: 1-800-364-3577. In Puerto Rico,

 

phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00.

 

 

Product Use

Warranty and

Limited Remedy

All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTYARISING OUT OFA COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price.

Limitation of Liability

Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.

Industrial and Transportation Business

Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55106

3M and Scotch-Weld are trademarks of 3M.

Printed in the USA

Element ID: 39883

Afhc3796.pdf

© 3M 2006