3M 19823, 19790, 19792, B0136262, B0136263 User Manual

...
0 (0)
3M™ Abrasive Products, 314D, Grades P80 - P400 Utility Cloth 07/11/14
__________________________________________________________________________________________
Page 1 of 10
Safety Data Sheet
Copyright,2014,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
19-9370-8
Version Number:
6.05
Issue Date:
07/11/14
Supercedes Date:
03/24/14
SECTION 1: Identification
1.1. Product identifier
3M™ Abrasive Products, 314D, Grades P80 - P400 Utility Cloth
1.2. Recommended use and restrictions on use
Recommended use
Abrasive Product
1.3. Supplier’s details MANUFACTURER:
3M
DIVISION:
Abrasive Systems Division
ADDRESS:
3M Center, St. Paul, MN 55144-1000, USA
Telephone:
1-888-3M HELPS (1-888-364-3577)
1.4. Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)
SECTION 2: Hazard identification
2.1. Hazard classification
Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.
2.2. Label elements
Signal word
Not applicable.
Symbols
Not applicable.
Pictograms
Not applicable.
2.3. Hazards not otherwise classified
None.
94% of the mixture consists of ingredients of unknown acute oral toxicity.
SECTION 3: Composition/information on ingredients
3M™ Abrasive Products, 314D, Grades P80 - P400 Utility Cloth 07/11/14
__________________________________________________________________________________________
Page 2 of 10
Ingredient C.A.S. No. % by Wt
Aluminum Oxide Mineral (non-fibrous) 1344-28-1 20 - 45 Filler 471-34-1 0 - 20 Filler 1318-74-7 0.5 - 2 Titanium Dioxide 13463-67-7 0.3 - 0.5 Carbon Black 1333-86-4 0.1 - 0.5 Cured Resin Mixture 15 - 35 Cloth Backing None 25 - 65
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation:
Remove person to fresh air. If you feel unwell, get medical attention.
Skin Contact:
Wash with soap and water. If signs/symptoms develop, get medical attention.
Eye Contact:
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention.
If Swallowed:
No need for first aid is anticipated.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.
4.3. Indication of any immediate medical attention and special treatment required
Not applicable
SECTION 5: Fire-fighting measures
5.1. Suitable extinguishing media
In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
5.2. Special hazards arising from the substance or mixture
None inherent in this product.
Hazardous Decomposition or By-Products
Substance Condition
Carbon monoxide During Combustion Carbon dioxide During Combustion
5.3. Special protective actions for fire-fighters
No special protective actions for fire-fighters are anticipated.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Observe precautions from other sections.
3M™ Abrasive Products, 314D, Grades P80 - P400 Utility Cloth 07/11/14
__________________________________________________________________________________________
Page 3 of 10
6.2. Environmental precautions
Not applicable.
6.3. Methods and material for containment and cleaning up
Not applicable.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Avoid breathing of dust created by sanding, grinding or machining. Combustible dust may form by action of this product on another material (substrate). Dust generated from the substrate during use of this product may be explosive if in sufficient concentration with an ignition source. Dust deposits should not be allowed to accumulate on surfaces because of the potential for secondary explosions.
7.2. Conditions for safe storage including any incompatibilities
No special storage requirements.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational exposure limits
Ingredient C.A.S. No. Agency Limit type Additional Comments
Aluminum, insoluble compounds 1318-74-7 ACGIH TWA(respirable fraction):1
mg/m3
A4: Not class. as human carcin
Carbon Black 1333-86-4 ACGIH TWA(inhalable fraction):3
mg/m3
A3: Confirmed animal
carcin. Carbon Black 1333-86-4 CMRG TWA:0.5 mg/m3 Carbon Black 1333-86-4 OSHA TWA:3.5 mg/m3 Aluminum Oxide Mineral (non­fibrous)
1344-28-1 CMRG TWA:1 fiber/cc
Aluminum Oxide Mineral (non­fibrous)
1344-28-1 OSHA TWA(as total dust):15
mg/m3;TWA(respirable fraction):5 mg/m3
Aluminum, insoluble compounds 1344-28-1 ACGIH TWA(respirable fraction):1
mg/m3
A4: Not class. as human
carcin Titanium Dioxide 13463-67-7 ACGIH TWA:10 mg/m3 A4: Not class. as human
carcin Titanium Dioxide 13463-67-7 CMRG TWA(as respirable dust):5
mg/m3 Titanium Dioxide 13463-67-7 OSHA TWA(as total dust):15 mg/m3 Filler 471-34-1 CMRG TWA:10 mg/m3;STEL:20
mg/m3 Limestone 471-34-1 OSHA TWA(as total dust):15
mg/m3;TWA(respirable
fraction):5 mg/m3
ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling
Loading...
+ 7 hidden pages