3M™ SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket
3M™ SLiC 530/533/733-2 Port-MSM 0.61 Cable Entry Bracket
For use with 3M™ SLiC™ Free-Breathing Fiber Optic Closures and Terminals
Instructions
November 2011 |
3 |
78-8135-7466-8-B |
1.0 Kit Contents
Note: Visually inspect all components. If any component is missing or appears damaged, do not install. Call 3M customer service at 1-800-426-8688 for a replacement product.
1.1Kit Contents SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket 80-6113-2344-7
A.Cable Addition Bracket Assembly (1)
B.Cap
C.Multi-port Grommet (1)
D.Hose Clamp (1)
E.Pair Saver
F.3M™ Scotchlok™ Shield Bond Connector 4460 with LSM Clamp (2)
G.10-32 UNF Flange Nut (2)
H.Lubricant (1)
I.Instruction Manual 78-0013-2695-4 (Not Shown)
1.2Kit Contents SLiC 530/533/733-2 Port-MSM 0.61 Cable Entry Bracket 80-6113-8403-5
A.Cable Addition Bracket Assembly (1)
B.Cap
C.Multi-port Grommet (1)
D.Hose Clamp (1)
E.Pair Saver
F.3M™ Scotchlok™ Shield Bond Connector 4460 with LSM Clamp (2)
G.10-32 UNF Flange Nut (2)
H.Lubricant (1)
I.Instruction Manual 78-8128-0289-6 (Not Shown)
2.0Cable Preparations
2.1Per company practice, remove sufficient cable
jacketing to allow for slack storage and splicing needs (approximately 5 feet).
2.2Trim central strength members on both cables approximately 3" (76 mm) from the end of the cable jacket.
Note: When using ribbon fiber cable, leave a minimum of 2" (50 mm) of central tube.
2.3Insert cables into the multi-port grommet so that 1.25" to 1.75" (32–45 mm) of cable jacketing is exposed past the inside edge of the grommet.
Note: A small amount of lubricant provided in the kit may be placed on the leading edge of the cable to ease installation into the grommet.
Note: Place and tighten a cable tie around the grommet or you may also place a couple of wraps of Scotch® Linerless Rubber Splicing Tape 130C around cable to provide a better seal.
Note: Carefully follow safety, health and environmental information given on product label or the Materials Safety Data Sheet for the lubricant.
B C
A D
H
F, G |
E |
B C
A
D
H
E
F, G
1.25"–1.75" |
|
|
|
|
|
|
|
|
3" (76 mm) |
||
(32–45 mm) |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
78-8135-7466-8-B |
Loading...