3M 700P Operator Guide

1.24 Mb
Loading...

Digital Media System 700P

Operator and Product Safety Guide

Guía para el operador Betriebsanleitung Guide de l’utilisateur

Guida dell’operatore

June 2007 • 78-6971-1361-7-A • Copyright © 2007, 3M Company. All Rights Reserved.

3MDigital Media System 700P

Contents

Contents

 

Introduction

 

Thank You for Choosing 3M .........................................................................................................................

5

Safety Information

 

INTENDED USE...........................................................................................................................................

8

SAVE THESE INSTRUCTIONS ..................................................................................................................

8

Trademarks ....................................................................................................................................................

8

Warranty; Limited Remedy; Limited Liability..............................................................................................

9

Shipping Contents

 

Contents of Shipping Box ...........................................................................................................................

10

Optional Accessories ...................................................................................................................................

10

Installing or replacing batteries ...................................................................................................................

10

Keep Your Packing Materials ......................................................................................................................

11

What’s Next?................................................................................................................................................

11

Product Description

 

Benefits of Product ......................................................................................................................................

12

Machine Characteristics...............................................................................................................................

12

Parts Identification List................................................................................................................................

13

Projector Terminal Connections .................................................................................................................

14

Control Panel ..............................................................................................................................................

14

Cable Connections .......................................................................................................................................

14

Digital Media System 700P Setup...............................................................................................................

15

Remote Control Functions...........................................................................................................................

16

Remote Control Notes .................................................................................................................................

17

ATTENTION ..............................................................................................................................................

17

Basic Operations

 

Image Size (Projector-to-Screen Distance) .................................................................................................

18

Projector Start Up ........................................................................................................................................

18

Stand By Mode ............................................................................................................................................

19

Start Up ........................................................................................................................................................

19

Projector Power Down.................................................................................................................................

19

Menu Navigation .........................................................................................................................................

19

Troubleshooting

 

Error Messages ............................................................................................................................................

28

Indicator Lamps ...........................................................................................................................................

29

What Flashing Indicator Lamps Mean ........................................................................................................

29

Audio and Image Issues...............................................................................................................................

31

ENGLISH

© 3M 2007. All Rights Reserved.

3

ENGLISH

Contents

3MDigital Media System 700P

Maintenance

 

Replacing Projection Lamp .........................................................................................................................

32

3MDigital Media System 700P Bottom View..........................................................................................

32

Specifications

 

Optical..........................................................................................................................................................

33

System Specifications ..................................................................................................................................

33

Sound System ..............................................................................................................................................

33

DVD Player..................................................................................................................................................

33

Other Features..............................................................................................................................................

34

Dimensions ..................................................................................................................................................

34

Weight ..........................................................................................................................................................

34

Other Care

 

Caring For The Inside Of The Projector ....................................................................................................

35

Caring For The Lens ...................................................................................................................................

35

Caring For The Cabinet And Remote Control ...........................................................................................

35

4

© 3M 2007. All Rights Reserved.

3MDigital Media System 700P

Introduction

 

 

 

Introduction

Thank You for Choosing 3M

Thank you for choosing 3M equipment. This product has been produced in accordance with 3M’s quality and safety standards to provide smooth and trouble free use in the years to come.

For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your home, meetings, presentations, and training sessions.

ENGLISH

© 3M 2007. All Rights Reserved.

5

ENGLISH

Introduction

3MDigital Media System 700P

Safety Information

Please read, understand, and follow all safety information contained in these instructions prior to the use of this 3MDigital Media System 700P. Retain these instructions for future reference.

3MMultimedia projectors are designed to operate in a normal office and home environment.

16˚ to 29˚C (60˚ to 85˚F)

10-80% RH (without condensation)

0-1828 m (0-6000 feet) above sea level

The ambient operating environment should be free of airborne smoke, grease, oil and other contaminants that can affect the operation or performance of the projector.

Use of this product in adverse conditions will void the product warranty.

Explanation of Signal Words and Symbols in Safety Labels and Instructions

WARNING: Indicates a potentially hazardous situation, which if not avoided, could result in death or serious injury and/or property damage.

CAUTION: Indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury and/or property damage.

Warning: Hazardous Voltage

Warning: Hot Surface – High Temperature Lamp

Attention: Read Accompanying Documentation

6

© 3M 2007. All Rights Reserved.

3MDigital Media System 700P Introduction

WARNING

 

 

• To reduce the risk associated with exposure to hazardous voltage:

 

 

- Do not remove any screws other than those specified in the lamp replacement instructions.

 

 

• To reduce the risk associated with hazardous voltage:

 

ENGLISH

- Do not operate this projector in wet environments or outdoors.

 

 

 

- Do not modify this projector or power cord.

 

 

- Do not attempt to service the projector; other than the lamp cartridge there are no user

 

 

serviceable parts inside the projector.

 

 

- Contact a 3M authorized service provider for service.

 

 

- Disconnect power cord when the projector is not in use, during lamp replacement, and while

 

 

 

cleaning.

 

 

- Do not allow water or other liquids to enter the projector.

 

 

• To reduce the risk associated with hazardous voltage and/or fire:

 

 

- Replace power cord if damaged.

 

 

- Contact a 3M authorized service provider if the projector becomes damaged.

 

 

- Use a grounded extension cord with a rating at least equal to that of the projector.

 

 

- Connect this projector to a grounded outlet.

 

 

• To reduce the risk associated with hot surface of lamp cartridge:

 

 

- Unplug the projector from the electrical outlet and allow the lamp to cool for 60 minutes before

 

 

replacing the lamp.

 

 

• To reduce the risk associated with choking:

 

 

- Keep the battery and battery cover away from children and pets.

 

 

• To reduce the risk associated with environmental contamination due to mercury:

 

 

- Hg: Lamp contains mercury. Don't throw in trash. Dispose according to local, state, or federal laws.

 

 

See www.lamprecycle.org or call 1-800-328-1371.

 

 

• To reduce the risk associated with lamp rupture related hazards:

 

 

- In event of lamp rupture, call 3M authorized service provider for repair. Ruptured lamp repair is

 

 

not user serviceable.

 

 

- Wash your hands thoroughly if contact with ruptured lamp debris has taken place.

 

 

- Ventilate the area where the lamp rupture occurs. The lamp operates at high temperature.

 

 

• To reduce the risk associated with hazard voltage, and/or impact, and/or tripping, and/or

 

 

intense visible light:

 

 

- Do not use this projector around unsupervised children.

 

 

• To reduce the risk associated with sharps, premature lamp failure, exposure to mercury:

 

 

- Always handle the fragile lamp module with care.

 

 

- Replace the lamp module when the lamp replacement message appears.

 

 

- Never replace the lamp module with a previously used lamp module.

 

 

 

 

 

© 3M 2007. All Rights Reserved.

7

Introduction 3MDigital Media System 700P

 

 

CAUTION

 

 

• To reduce the risk associated with intense visible light:

 

 

- Avoid looking directly into the projector lens while the lamp is on.

ENGLISH

 

• To reduce the risk associated with impact of a falling projector:

 

- Use only the 3M brand wall/ceiling mounting hardware kit if wall or ceiling mounting is desired.

 

 

 

 

- Installation of the 3M wall/ceiling kit must only be performed by qualified personnel.

 

 

- Adhere strictly to the proper installation procedure as outlined in the installation instructions

 

 

when installing the 3M wall/ceiling kit.

 

 

- Always operate the unit on a flat, sturdy, and horizontal surface.

 

 

• To reduce the risk associated with explosion, and/or chemicals from leaking battery:

 

 

 

- Use only with battery type AAA.

 

 

- Orient the battery’s plus (+) and minus (-) terminals according to the markings found on the

 

 

remote control.

 

 

- Do not leave the battery in the remote for an extended period of time.

 

 

- Do not heat, disassemble, short, recharge, or expose the batteries to fire or high temperature

 

 

- Do not carry batteries loose in your pocket or purse.

 

 

- Avoid eye and skin contact in the event that battery would leak.

 

 

- Do not mix used and new batteries.

 

 

• To reduce the risk associated with tripping, and/or impact:

 

 

- Position the power cord and data cable so that they can not be tripped over.

 

 

• To reduce the risk associated with environmental contamination due to battery chemicals:

 

 

- Dispose of exhausted batteries in accordance with applicable federal, state and local regulations.

 

 

 

INTENDED USE

Before operating the machine, please read the entire manual thoroughly. The 3MDigital Media System 700P was designed, built and tested for use indoors, using 3Mbrand lamps, 3Mbrand ceiling mount hardware and nominal local voltages. The use of other replacement lamps, outdoor operation or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition.

SAVE THESE INSTRUCTIONS

The information contained in this manual will help you operate and maintain your 3M Digital Media System 700P.

Trademarks

The 3M logo and 3M are registered trademarks of 3M Company. Vikuiti is a trademark of 3M Company.

Digital Light Processing is a trademark or registered trademark of Texas Instruments.

8

© 3M 2007. All Rights Reserved.

3MDigital Media System 700P

Introduction

 

 

 

Warranty; Limited Remedy; Limited Liability

This product will be free from defects in material and manufacture for a period of two years from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. To obtain warranty service outside of the USA, immediately notify the dealer from which you purchased the product of any defects. In the USA call 1-800-328-1371 for warranty or repair service.

The warranty for lamps that are included as original equipment in the projectors is for parts only and is effective for a period of 90 days after the date of purchase of the projector or 180 hours of lamp usage,whichever occurs first.

Important: The above warranty shall be void if the customer fails to operate product in accordance with 3M’s written instructions. This warranty gives you specific legal rights and you may have other rights that vary from state to state.

REGULATORY NOTICES

FCC STATEMENT - CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class “A” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference.

EEC STATEMENT

This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements.

This machine was tested against the 73/23/EEC (European Economic Community) for LVD (Low Voltage Directive) and fulfills these requirements.

This product is compliant with EU Directive 2002/95/EC (Restriction of Hazardous Substances in Electrical and Electronic Equipment), as amended by Commission Decision 2005/618/EC on maximum concentration values.

This product is compliant with EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).

ENGLISH

© 3M 2007. All Rights Reserved.

9

ENGLISH

Introduction

3MDigital Media System 700P

Shipping Contents

Contents of Shipping Box

The 3MDigital Media System 700P is shipped with the necessary cables required for standard VCR, PC or laptop computer connections. Carefully unpack and verify that you have all of the items shown below in Figure 1–1. If any of these items are missing, please contact your place of purchase.

Note: A set of cables for connection to Apple Macintosh is available as an option.

The shipping carton contains the following items illustrated in Figure 1–1. If any of these items are missing, please contact your place of purchase.

1.Digital Media System 700P

2.Remote control transmitter (AAA batteries

included)

3. VGA-cable 1.8M 15-MAIL

4. Power cord

1

2

3

 

5.

Operator’s Guide

 

 

 

Digital Media System

 

 

700P

 

 

Operator and Product Safety Guide

 

 

Guía para el operador

 

 

Betriebsanleitung

 

 

Guide de l’utilisateur

 

 

 

 

 

Guida dell’operatore

 

4

5

Figure 1-1. Inventory of Shipping Box

Optional Accessories

1.HDMI Cable

2.RS232 Cable

3.Audio Cable (RCA-mini jack)

4.S-Video Cable

5.Component Video Cable

Installing or replacing batteries

Push on the cover and slide it to open. Install two AAA batteries with the correct polarities, then close the cover.

10

© 3M 2007. All Rights Reserved.

3MDigital Media System 700P

Introduction

 

 

 

Keep Your Packing Materials

Save the shipping box and packing materials in the event the Digital Media System 700P should require shipping to a 3M Service Center for repair. Use packing material to protect projector.

What’s Next?

Take a few minutes to review Section 2 to familiarize yourself with the Digital Media System 700P machine characteristics and then turn to Section 3 to set up the projector.

We hope you will enjoy using this high performance product in your meetings, presentations and training sessions. This product has been produced in accordance with 3M’s highest quality and safety standards to ensure smooth and trouble-free use in the years to come.

ENGLISH

© 3M 2007. All Rights Reserved.

11

+ 25 hidden pages