Page 1
3M™ Double Coated Tapes
A Variety of Carriers for Easy
Handling and Dispensing
™
3M
Double Coated Tapes are
engineered with adhesive on both
sides of paper, lm or tissue. This
increases the dimensional stability
of the adhesive for easy handling
and application.
Depending on your production
volume, you can apply tape by hand
or with automatic high-volume
dispensers. Select paper, polyester
lm or other synthetic carriers to
help meet your special needs.
Dierent adhesives (rubber, silicone
or acrylic) can be on opposite sides
of the carrier to join dierent
materials. Your choice of properties
include high temperature resistance,
conformability to irregular surfaces,
high initial adhesion, high shear
strength and more.
236
Simply roll on a strip or band of 3M™ Double Coated Tape 9832 for quick edge banding with no
special equipment. Pressure sensitive adhesive tape grabs with immediate handling strength for
improved productivity.
237 238 239
With dierential adhesive, the silicone
adhesive side of 3M
adheres to a silicone rubber keypad. Acrylic
adhesive side adheres to a plastic base.
Product Description/Application Ideas
200MP/300LSE (Dierential Adhesive)
9496LE
300LSE (Low Surface Energy Acrylic)
93005LE
93010LE
93015LE 5.9 PET
93020LE 7.9 PET
™
Double Coated Tape
Dierential double coated tape featuring
High Performance Acrylic Adhesive
200MP and Low Surface Energy Acrylic
Adhesive 300LSE.
Very thin double-coated tape polyester
tape with good anti-lifting properties.
High adhesion to polypropylene and LSE
plastics for excellent graphic appearances.
Good chemical/humidity resistance.
3M™ Double Coated Tape 410M is the quick,
convenient way to bond golf club grips to
shafts. Adhesive sets up fast and bonds rmly
for long-lasting performance.
Tape
Cal.
Carrier
(mils)
6.7 PET
2.0 PET
3.9 PET
Type
Liner
Master
Caliper
Type
(mils) Metal
58#
PCK
58#
PCK/
83#
PCK
58#
PCK
58#
PCK
58#
PCK
4.2
4.2/
6.2
4.2
4.2
4.2
Size Specs
24" x 36"
sheets
48" x 60
yd
54" x
180 yd
54" x
180 yd
54" x
180 yd
For precise t, 3M™ Double Coated Tape
is pre-applied to foam gasketing materials
and then die-cut to size. This helps increase
dimensional stability of the part to facilitate
assembly.
Adhesion
HSE
LSE
Plastic
Plastic Foam
10 9 1 2 9 -40 400
–
9 9 10 1 8 -40 300
–
–
9 9 10 1 8 -40 300
–
–
Chem.
Resist.
Low
(°F)
Temp.
Range
High
(°F)
Bonding Tapes
Values: 1 = Lowest Performance; 10 = Highest Performance
Rankings are a general guide. Adhesives should be tested with actual components to ensure acceptable performance.
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specication purposes.
3M Industrial Adhesives and Tapes | January 2017 Edition
79
Page 2
3M Industrial Adhesives and Tapes
3M™ Double Coated Tapes
Tape
Cal.
Product Description/Application Ideas
300 (High Strength Acrylic)
444 Foam lamination. Gasket attachment. 3.9 PET
444PC Foam lamination. Gasket attachment. 3.9 PET
300MP (High Tack Acrylic)
99786
99786NP Same as 9786 except an unprinted liner. 5.5
9832
9832HL Same as 9832 except with a heavier liner. 4.8 PET
340 (High Tack Acrylic)
9456
9824
9828 4.0 PET
9828PC
350 (High Performance Acrylic)
9500PC
3028EK
375 (High Performance Double Coated)
9086 Easy tearing, easy handling. 7.5 Tissue
9087 Thick adhesive to bond rough surfaces. 10.2 PVC
400 (Acrylic Adhesive)
415
9576 4.0
Thin nonwoven carrier for dimensional
stability and improved handling.
Temperature resistance up to 300°F.
General purpose tape with improved
temperature resistance.
High tack acrylic adhesive with good
adhesion to many plastics.
Foam lamination.
Gasket attachment.
High tack acrylic adhesive with good
adhesion to many foams.
High performance with good chemical
resistance.
Same as 9500PC with an extensible kraft
liner which facilitates narrow slitting.
Splice papers, lms and foils.
Carrier
(mils)
Type
Non-
5.5
woven
Non-
woven
4.8 PET
5.0 Tissue
3.1 PET
4.0 PET
5.6 PET
5.6 PET
4.0 PET
Clear PP60#
Liner
Type
55#
DK
58#
PCK
58# PCK
Printed
58# PCK
Unprinted
58#
PCK
58#
PCK
55#
DK
55#
DK
55#
DK
74#
PCK
61.5
PCK
Extensible
Kraft
Glassine
Black
Logo
Glassine
Green
Logo
60#
DK
DK
292
Master
Caliper
Size Specs
(mils) Metal
48" x 108
3.2
4.2
4.2
4.2
4.2
6.2
3.2
3.2
3.2
5.6
4.5
5.5
3.0
3.0
4.0
4.0
48" x 108
48" x 180
54" x 180
54" x
250 yd
54" x
250 yd
54" x 180
54" x
250 yd
54" x
250 yd
54" x
250 yd
48" x 108
48" x 108
54" x 750
54" x 750
48" x 108
27" x 360
–
yd
–
yd
–
yd
–
yd
–
–
–
yd
–
–
–
–
yd
–
yd
–
yd
yd
yd
yd
High High Med Low Good -10
– 185
–
–
Low
(°F)
Temp.
Range
High
(°F)
250
Adhesion
HSE
LSE
Plastic
Plastic Foam
7 9 9 9 6 -40 250
7 7 8 9 7 -40 250
6 6 5 4 8 -40 180
9 10 10 9 8 -40 450
5 5 5 5 5 -60 250
Chem.
Resist.
Values: 1 = Lowest Performance; 10 = Highest Performance
Rankings are a general guide. Adhesives should be tested with actual components to ensure acceptable performance.
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specication purposes.
3M Industrial Adhesives and Tapes | 3M.com/Assemblysolutions80
Page 3
3M™ Double Coated Tapes
Tape
Cal.
Product Description/Application Ideas
Silicone/Acrylic Dierential
9731
Silicone
96042
700/745/760 (Synthetic Rubber)
9443NP
9589 Carpet attachment. 9 HDPE
830/850/860 (Natural Rubber)
401M
410M
900 (Miscellaneous)
9737
9738
9740
9741
9816L
9816H
9817L
9817H
Specialty Dierential Rubber/Acrylic
9377
Dierential adhesive. Silicone/Acrylic
double coated tape. Ideal for attaching
silicone materials to HSE or LSE materials.
Silicone attachment. Silicone linered
for easier processing.
High tack rubber adhesive with good
adhesion to most plastics.
Used for mounting rubber or
photopolymer printing plates.
Core starting/end tabbing of papers, lms
and foils.
Clear, thin PET carrier. Aggressive and
versatile splicing tape.
Clear, non-woven tissue carrier.
Aggressive and versatile splicing tape.
Clear, high peel, tack and shear
strength. Performance grade
splicing tape for corrugators.
Clear, thick, super aggressive tape.
Adheres to a wide variety of substrates
for splicing applications.
General purpose, high tack,
rubber-based adhesive.
Exposed side is acrylic, liner side is
rubber-based. Excellent quick stick and
adhesion to high and low energy surfaces.
Flame retardant double-coated tape
for carpet installation to bond carpet
to interior oorboards.
Carrier
(mils)
Type
5.5 PET
5 PET
6 HDPE
9.0 Paper
6.0 Paper
3.5 PET
Non-
4.3
woven
tissue
3.5 PET
6.5 PET
3.5 PET
3.3 PET
11.0 PP
Type
Clear
PET/54#
Tan PCK
White
PET
60#
DK
62#
DK
60#
DK
54#
DK
54#
DK
55#
DK
White
55#
DK
White
55#
DK
55#
Glassine
60#
Kraft
74#
Kraft
14 pt.
Board
60#
Kraft
74#
Kraft
14 pt.
Board
58#
PCK
Liner
Caliper
3.0/5.4
Master
2
3.7
3.7
3.7
3.0
3.0
3.5
4.3
3.5
6.5
3.5
3.5
3.5
3.5
3.5
3.5
4.2
Size Specs
48" x
180 yd
48" x
180 yd
27" x
120 yd
27" x
144 yd
26" x
144 yd
22" x
108 yd
23.5" x
108 yd
54" x
180 yd
54" x
180 yd
54" x
180 yd
54" x
180 yd
54" x
200 yd
54" x
200 yd
54" x
200 yd
54" x
200 yd
54" x
200 yd
54" x
200 yd
24" x
25 yd
(mils) Metal
Adhesion
HSE
Plastic
– 10 10 9 8 8 -40 300
– 9 8 7 6 10 -40 350
–
8 9 9 2 2 -40 2009579 Core starting on metal cores. 9 HDPE
–
–
– 8 8 8 5 1 -40 180
– 8 8 8 5 1 -40 200
–
5 5 2 5 7 -10 300
–
– 6 6 2 3 6 10 425
– 7 7 3 7 5 -40 200
–
8 8 7 7 3 -40 1509816M
–
–
– 8 7 6 7 3
–
8 8 7 6 3
–
– 4, 10 – – – 8 40 250
LSE
Plastic Foam
Chem.
Resist.
Temp. Range
Low
High
(°F)
(°F)
-40 1759817M
Bonding Tapes
Values: 1 = Lowest Performance; 10 = Highest Performance
Rankings are a general guide. Adhesives should be tested with actual components to ensure acceptable performance.
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specication purposes.
3M Industrial Adhesives and Tapes | January 2017 Edition
81
Loading...