Page 1
3M D Sub EMI Junction Shell
Metalized Plastic
S Protection from EMI/ESD
S Easy assembly reduces time and labor to ensure
low applied cost
S Light weight, compact design
Physical
Date Modified: May 30, 2003
Shell
Material: ABS
Plating: Nickel Over Copper
Compression Insert
Material: PVC UL 94V-0
Durometer: 85
Hardware: (2) Jackscrews #4-40 × .450
(2) Saddle Washers
(2) Nuts 4-40 UNC
(2) Nuts 4-40 UNC for 9, 15 & 25 position
(3) Nuts 4-40 UNC for 37 position
(2) Screws 4-40 UNC for 9, 15 & 25 position
(3) Screws 4-40 UNC for the 37 position
Material: Steel
Plating: Zinc
Mounting Hardware: See Specification Sheet TS-0142
TS-0032-08
Sheet 1of 2
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Page 2
3M D Sub EMI Junction Shell
F
G
0.475
0.320
0.360
0.315
0.360
0.285
0.360
0.255
0.360
0.210
0.475
3MPart
0.4
0
0.6
4
0.3
5
0.6
4
[4.8]
Metalized Plastic
Table 2 -- Compression Inserts
Insert
or
3357-6509
3357-6515
3357-6525
3357-6537
E
A B C D E F
OD ID OD ID OD ID OD ID OD ID OD ID
0.475 0.320 0.360 0.315 0.360 0.285 0.360 0.255 0.360 0.210
[ 12.07 ]
0.600
[ 15.24 ]
0.655
[ 16.64 ]
[,8.13 ]
0.450
[ 11.43 ]
0.570
[ 14.48 ]
[9.14]
0.450
[ 11.43 ]
0.700
[ 17.78 ]
D
F
[8.00]
0.410
[ 10.41 ]
0.620
[ 15.75 ]
[9.14]
0.450
[ 11.43 ]
0.810
[ 20.57 ]
See note 3
C
D
E
[7.24]
0.370
[9.40]
0.650
[ 16.51 ]
B
C
Dimensions
[9.14]
0.450
[ 11.43 ]
0.655
[ 16.64 ]
G (Dia Collar)
A
[6.48]
0.300
[7.62]
0.500
[ 12.70 ]
[9.14]
0.450
[ 11.43 ]
0.655
[ 16.64 ]
[5.33]
0.230
[5.84]
0.425
[ 10.80 ]
N/A N/A
N/A N/A
0.655
[ 16.64 ]
Cover Screw
Top Cover
Cable
Compression Insert
Cable Shield
(Folded Back)
0.475
[ 12.07 ]
0.600
[ 15.24 ]
0.330
[8.38]
Connector
Mounting Flange
Connector
Captive Screw
0.810
[ 20.58 ]
G
A
B
Junction Shell
Table 1 -- Junction Shell
Number
3357-6509
3357-6515
3357-6525
3357-6537
A B C D E F Min Max
1.23
[ 31.2 ]
1.54
[ 39.1 ]
[ 16.3 ]
2.09
[ 53.1 ]
2.73
[ 69.3 ]
Dimensions Cable O.D. Range
1.47
[ 37.3 ]
1.60
[ 40.6 ]
1.74
[ 44.2 ]
1.80
[ 45.7 ]
0.40 0.64
[ 10.2 ]
0.52
[ 13.2 ]
0.73
[ 18.5 ]
[ 16.3 ]
[ 18.0 ]
[ 22.4 ]
0.71
0.88
Ordering Information
Note:
1. Compression inserts cannot be ordered separately.
2. Use appliable Jack Screw or Jack Socket Kit mounting hardware.
3. The37 position shell has 3 cover screw holes.
F
Compression
Inserts
0.984
[ 24.99 ]
1.312
[ 33.32 ]
1.857
[ 47.17 ]
2.500
[ 63.50 ]
[4.8]
[7.6]
3357-65XX
0.19
0.30
Connector Size
09 = 9 Position
15 = 15 Position
25 = 25 Position
37 = 37 Position
0.35
[8.9]
0.46
[11.7]
0.68
[ 17.3 ]
Saddle Washer
Bottom Cover
Nut
Inch
[mm]
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
TS-0032-08
Sheet 2 of 2
±.005±.1 ±.01
3
Interconnect Solutions
http://www.3M.com/interconnects/
For technical, sales or ordering information call
3M is a trademark of 3M Company.
800-225-5373
Page 3
© 3M 2003
3
Electronic and Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/eisd
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
Loading...