3B SCIENTIFIC® PHYSICS
Thermosäule 8441301
Bedienungsanleitung
07/06 SP
1. Beschreibung
Die Thermosäule ist ein hochempfindliches Gerät zur Strahlungsmessung (z.B. Wärmestrahlung eines schwarzen Körpers, Reflexion der langwelligen Wärmestrahlung).
In einem Metallgehäuse mit poliertem Trichter eingebaut enthält die Thermosäule eine schwarze Fläche von 15 mm Durchmesser, mit der 17 Thermoelemente verbunden sind. Auftreffende Wärmestrahlung erzeugt an den Thermoelementen eine Thermospannung U, die proportional zur Intensität der Wärmestrahlung ist.
1Eintrittsöffnung (Messtrichter)
2Stiel
3Metallgehäuse
4Messausgang (4-mm-Sicherheitsbuchsen)
2. Technische Daten
Empfindlichkeit: |
ca. 0,28 mV/µW |
Einstelldauer: |
40 s für 95% des Messwertes |
Schwarze Fläche: |
15 mm |
Innenwiderstand: |
1 Ω |
Anschlüsse: |
zwei 4-mm- |
|
Sicherheitsbuchsen |
Abmessung: |
94 mm x 40 mm |
Stiel: |
10 mm |
Masse: |
ca. 200 g |
1
3. Bedienung
Zur Durchführung der Experimente sind folgende Geräte zusätzlich empfohlen:
1 |
Messverstärker für Schülerübungen |
8532161 |
1 HF-Kabel, BNC/4-mm |
U11257 |
|
1 |
Messgerät ESCOLA 10 |
8531160 |
1 Tonnenfuß |
8611210 |
Durch die Körperwärme oder andere Fremdeinflüsse kann der Messwert verfälscht werden.
•Während der Messung das Gerät nicht anfassen.
•Direkte Sonneneinstrahlung oder Aufbau in Heizkörpernähe vermeiden.
•Thermosäule ca. 3 cm vom Messgegenstand (z.B. Lesliewürfel 8442830) aufbauen.
•Messverstärker und Messgerät anschließen.
Um eine Drift der Ausganspannung zu vermeiden, sollte das Metallgehäuse der Thermosäule mit der Umgebungstemperatur ausgeglichen sein.
•Nach Aufbau des Experimentes ein paar Minuten mit der Messwerterfassung warten.
T
U
I
Fig. 1 Experimenteller Aufbau Lesliewürfel
V
12 V AC
Elwe Didactic GmbH • Steinfelsstr. 6 • 08248 Klingenthal • Deutschland • www.elwedidactic.com 3B Scientific GmbH • Rudorffweg 8 • 21031 Hamburg • Deutschland • www.3bscientific.com Technische Änderungen vorbehalten
3B SCIENTIFIC® PHYSICS
Thermopile 8441301
Instruction sheet
07/06 SP
1 |
Inlet (funnel) |
2 |
Shaft |
3 |
Metal housing |
4 |
Measurement output (4-mm safety connec- |
|
tors) |
1. Description
The thermopile is a highly sensitive apparatus used for measuring radiation (e.g. heat radiation from black bodies, reflection of long-wave heat radiation).
Integrated in a metal housing with a polished funnel, the thermopile consists of a black surface of 15 mm diameter to which 17 thermocouples are connected. The thermocouples generate a thermoelectric potential U which is proportional to the intensity of the incident heat radiation.
2. Technical data
Sensitivity: |
0.28 mV/µW approx. |
Setting time: |
40 s for 95% of the meas- |
|
ured value |
Black surface: |
15 mm |
Internal resistance: |
1 Ω |
Connections: |
Two 4-mm safety connec- |
|
tors |
Dimensions: |
94 mm x 40 mm |
Shaft: |
10 mm |
Weight: |
200 g approx. |
1
3. Operation
To conduct the experiment, the following apparatus is additionally recommended:
1 Instrumentation amplifier for students’ experiments
8532161
1 x 4-mm high-frequency BNC cable |
U11257 |
|
1 |
Multimeter ESCOLA 10 |
8531160 |
1 |
Stand base |
8611210 |
In order to prevent any drifting of the output voltage, the metal housing of the thermopile should be at room temperature.
•After setting up the experiment, wait for a few minutes before taking readings.
T
U
I
Fig. 1 Experimental set-up Leslie’s cube
Readings may be made incorrect due to the influence of body heat or other external influences.
•Do not touch the apparatus while taking readings.
•Avoid direct sunlight and do not set up the apparatus in the vicinity of a heater/radiator.
•Set up the thermopile approx. 3 cm away from the object of the experiment (e.g. Leslie’s cube 8442830).
•Connect up the instrumentation amplifier and the multimeter.
V
12 V AC
Elwe Didactic GmbH • Steinfelsstr. 6 • 08248 Klingenthal • Germany • www.elwedidactic.com 3B Scientific GmbH • Rudorffweg 8 • 21031 Hamburg • Germany • www.3bscientific.com Technical amendments are possible.