2N Entrance guard 2N Helios - Manual - antivandal installation, Helios User Manual

Loading...
2N Entrance guard 2N Helios - Manual - antivandal installation, Helios User Manual

2ENTRY Helios – VANDAL RESISTANT accessories

Order no. 9135511E

Order no. 9135511KE

Order no. 9135515E

Vandal resistant mask for

Vandal resistant mask for

Vandal resistant mask for

basic module

basic module with keypad

one extension module

+ vandal resistant flush fitting box

+ vandal resistant flush fitting box

+ vandal resistant flush fitting box

Spare parts (to order):

Masks:

9135510E

vandal resistant mask for 1 basic module

 

9135510KE

vandal resistant mask for 1 basic module with keypad

 

9135514E

vandal resistant mask for 1 extension module

Boxes:

9135353E

vandal resistant flush fitting box for 1 module

Warning:

Boxes are not to be bricked up – they are designed for dry mounting.

A hood for the vandal resistant design is not included in the offer because it is very expensive to manufacture a hood

with the same resistant properties as the panel. Location of the vandal resistant panel in an external environment is permitted without a hood. Because the climatic conditions in various countries could differ to a significant extent, the manufacturer cannot understandably guarantee the perfect functioning of the equipment under all circumstances (for example under a layer of frost). In such an extreme case, a suitable individual solution must be found – for example a recess, heating, closed boxing or similar.

Mounting instructions

Mounting the boxing into the wall:

Prepare a hole with the dimensions 215 – 220 mm (height) x 105 – 110 mm

(for one module) or in accordance with table below (for multiple modules). 9 WARNING!!! The boxing is designed for dry mounting. The dimensions of

the hole must be adhered to in order for all corners of the boxing to be flush with the façade - the boxing must not sink into the hole. This ensures the precise recessing depth of the boxing into the wall, which is necessary for the correct functioning of the product!!!

Only for

Number of

2

3

4

5

6

7

8

installation

modules

 

 

 

 

 

 

 

of multiple

hole width

239 to

372 to

506 to

639 to

773 to

906 to

1040 to

modules:

244 mm

377 mm

511mm

644 mm

778 mm

911 mm

1045 mm

Before connecting boxes together, remove small side holes for cables passing through.

Connect boxes together jumpers and screws before wall flush mounting. Jumpers are from the bottom and screws from the top.

First box from the left is designated for base module. To the bottom strap stick on the metal washer provided in the package.

+ 1 hidden pages