2N Door camera for 2N Helios - Installation manual - camera 9135210E, Helios User Manual

Loading...
2N Door camera for 2N Helios - Installation manual - camera 9135210E, Helios User Manual

2ENTRY Helios color video camera kit

Order No. 9135210E

Description

The 2ENTRY Helios color video camera kit contains all necessary items for additional upgrade of your door communicator. It contains an electronic camera module, movable hinge and the connection cable for the camera and the communicator’s main board. The video camera is adjustable both vertically and horizontally due to the movable hinge system. In order to configure the camera use the appropriate connectors (jumpers) provided in the kit.

!!Warning!!

The video camera shares the power supply with the back light. Before installation make sure that the parameters of the back light power supply comply with the requirement of the video camera (see “Technical Parameters” section in the manual). The suitable power supply is 12V/2A stabilized. It is possible to order this power supply by using order number 91341481E.

In no case use AC power supply (mains transformer)!

Installation

1.Remove metal cover from the door phone.

Remove plastic cover from the base by unscrewing the screws (4x) located at the corners.

2.Remove the black camera cover and replace it with the clear cover from the “video kit”.

3.Remove the loudspeaker cradle from the base by lifting out the pins and pushing the cradle slightly forward.

4.Assemble the movable hinge and screw (2x) it to the base. Place the video camera on the top of the hinge and use provided screws (2x) to secure (see the figure below).

+ 1 hidden pages