Zoom 1652B, 651A, 1640B, 5615A, 1645B User Manual

...
0 (0)
Zoom 1652B, 651A, 1640B, 5615A, 1645B User Manual

Z O O M M O D E M

Quick Start

This Quick Start tells you how to install your modem with a Windows PC. Detailed information about advanced features and installation instructions for Macintosh and Linux are in the User Guide on the CD. The modem requires that you have ADSL service, which is usually called DSL in the USA.

Important Safety Measures

To reduce the risk of fire, use the supplied phone cord or an AWG 26 or larger UL-listed or CSA-certified phone cord.

Do not use this product near water — for example, in a wet basement or next to a swimming pool.

Avoid using a telephone (other than a cordless phone) during an electrical storm.

Do not use the telephone to report a gas leak while you are in the vicinity of the leak.

1Turn on the Windows computer that you will use for setup. This can be any Windows Vista™, XP, 2000, Me or 98 computer with an available Ethernet port.

2Close any open programs, including any antivirus software or pop-up blockers.

3Insert the supplied CD into the CD drive of your computer. The CD should start automatically. (If the CD does not start automatically, click the Windows Start button, click Run, and then type E:\setup.exe, where E is the letter of your CD drive.)

Windows Vista:

If the AutoPlay dialog box appears, click Run Setup.exe:

If the User Account Control dialog box appears, click Allow. 4 Follow the on-screen prompts for the Install Assistant.

Windows Vista: If a message tells you that Windows can't verify the publisher of the driver software, select Install this driver software anyway.

If you are prompted to enter your ADSL provider user name and password, remember that these terms are case-sensitive. It will take 1-3 minutes to establish a connection with your ADSL service.

Congratulations! Your installation is complete.

To test your installation, open your browser and go to a familiar Web site. If your browser works, installation is complete for the computer you used for setup. If your browser doesn't work, see the Troubleshooting Tips below.

Advanced Features

The options that are set by default when your modem is installed are sufficient for most users. However, those who want or need to change the modem’s settings can do so using the Advanced Setup page. To open this page, follow these steps to log in to the Zoom Configuration Manager:

1Open your Web browser. If you have an Ethernet connection, type 10.0.0.2 in the address bar. If you have a USB connection (X4 and X5 only), type 10.0.0.3 in the address bar. Then press Enter.

2In the login box, type the following User Name and Password in lowercase letters:

User Name: admin Password: zoomadsl

On the Basic Setup page, click the Advanced Setup button at the top of the page. Click one of the buttons on the Advanced Setup page to use a feature.

For information about using the Advanced Setup features, please see the online Help and the User Guide on the CD.

Troubleshooting Tips

Problem

My modem’s DSL light is steady on, but I cannot connect to the Internet.

Check these items:

If you are using an Ethernet port, check that the modem’s ETHERNET (X5) or LAN (X3 and X4) light is on. If you are using a USB port, check that the modem’s USB light is on. If the appropriate light is not on, reboot your computer. If the light is still not on, try replacing the cable.

Make sure that you have typed your ADSL username and password correctly. Follow the steps listed under Advanced Features on page 2 to log in to the Zoom Configuration Manager, and on the Basic Setup page verify your user name and password.

Problem

My modem’s DSL light continually blinks and does not stay steady on.

Check these items:

Verify that your service provider has turned on your ADSL service. If you’re not sure, you can place a call to your service provider’s customer support to verify this.

2

Loading...
+ 2 hidden pages