Installation / Operating Guide | Warranty
Model Numbers | H 2 4 F 3 9 D T | H25F39DT | H27F39DT | ConciergeTM TVs
t a b l e o f c o n t e n t s
p a g e 5
© Copyright 2005, Zenith Electronics Corporation
For Customer Support/Service please call:
1-888-865-3026
www.zenith.com
RECORD THE MODEL NUMBER
The model and serial number of the ConciergeTM TV are located on the back of the cabinet. For future reference, we suggest that those numbers be recorded here:
MODEL NO.____________________________________
SERIAL NO.____________________________________
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
POWER CORD POLARIZATION:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
NOTE TO CABLE/TV INSTALLER:
This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
REGULATORY INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product.
COMPLIANCE:
The responsible party for this product’s compliance is:
Zenith Electronics Corporation, 2000 Millbrook Drive, Lincolnshire, IL 60069, USA. Phone: 1-847-941-8000.
2-WIRE COMM WARN |
ConciergeTM is a trademark of Zenith Electronics Corporation |
|
© Copyright 2005 Zenith Electronics Corporation |
IMPORTANT SAFETY INSTRUCTIONS
This product has been manufactured and tested with yuur safety in mind. Howerver, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into the new product, please read and observe the following safety points when installing and using the new product, and save them for future reference.
Observing the simple precautions discussed in this operating guide can help the user get many years of enjoyment and safe operation that are built into the new product.
This product complies with all applicable U.S. Federal safety requirements, and those of the Canadian Standards Association.
1. Read Instructions
All the safety and operating instructions should be read before the product is operated.
2. Follow Instructions
All operating and use instructions should be followed.
3. Retain Instructions
The safety and operating instructions should be retained for future reference.
4. Heed Warnings
All warnings on the product and in the operating instructions should be adhered to.
5. Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Water and Moisture
Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.
7. Accessories
Do not place this product on a slippery or tilted surface, or on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
8. Transporting Product
A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
9. Attachments
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
10. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
11. Power Sources
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
12. Power Cord Polarization
This product is equipped with a polarized alternating-current power plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
13. Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code (U.S.A.), ANSI/ NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode.
(Continued on next page)
PORTABLE CART WARNING |
P A G E 3 |
IMPORTANT SAFETY INSTRUCTIONS
(Continued from previous page)
Example of Grounding According to National Electrical Code Instructions
Ground Clamp |
|
Antenna Lead in Wire |
|
|
|
|
|
|
|
|
Antenna Discharge Unit |
|
|
(NEC Section 810-20) |
|
|
Grounding Conductor |
Electric Service |
|
(NEC Section 810-21) |
|
|
|
Equipment |
|
Ground Clamps |
|
|
|
|
|
Power Service Grounding |
|
|
Electrode System (NEC |
|
|
Art 250, Part H) |
NECNational Electrical Code
result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
e.If the product has been dropped or the cabinet has been damaged.
f.If the product exhibits a distinct change in performance.
21. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
22. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
15. Lightning
For added protection for this product (receiver) during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
16. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
18. Object and Liquid Entry
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
23. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
24. Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
25. CAUTION concerning the Power Cord:
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has not additional outlets or branch circuits.
Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damage wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
19. Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
20. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.If the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the product.
c.If the product has been exposed to rain or water.
d.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may
26. Outdoor Use Marking :
WARNING - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
27. Wet Location Marking :
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
P A G E 4
Table of Contents
Use the steps outlined below as a setup guide and to determine the TV features that will require adjustment for the needs of the end user
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Step 1. Hook Up TV
TV and other Equipment Hookups
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Cable service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Antenna with VCR . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Cable service with VCR . . . . . . . . . . . . . . . . . . . . . . . 9 External Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Step 2. Channel Search and Reception Setup
Auto Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 (Select Antenna, or cable service and perform channel search)
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 12 Guest Remote Key Functions . . . . . . . . . . . . . . . . . . 13 Optional Installer’s Remote Key Functions . . . . . . . . . . 14 On-Screen Menus Overview . . . . . . . . . . . . . . . . . . . 15
Step 3. Customize the ConciergeTM TV’s Features
Setup Menu (Start with page 11, Auto Program)
Add/Del/Blank . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Channel Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Timer (On/Off Timer) . . . . . . . . . . . . . . . . . . . . . . . 19
Captions (Caption/Text) . . . . . . . . . . . . . . . . . . . . . 20
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Video Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installer Parental Control Menu . . . . . . . . . . . . 23 - 24
Other Menus and On-Screen Displays . . . . . . . . . . . . . 25
Managing the Channel Banks . . . . . . . . . . . . 26 - 27 - 28
Installers Menus . . . . . . . 29 - 30 - 31 - 32 - 33 - 34 - 35
Guest Operation Section (Copy for guest usage)
Guest Remote Control Key Functions . . . . . . . . . . . . . 13 Guest Parental Control Menu . . . . . . . . . . . . 36 - 37 - 38 Guest Menus and On-Screen Displays . . . . . . . . . . . . . 39
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Warranty for ConciergeTM Series TVs . . . . . . . . . Back Cover
Installer/Hotel Note:
Pages 13, 36, 37, 38, and 39 contain information and menus which the guest can use to operate the TV. It is recommended that these five pages be copied and included with the literature packet that the hotel provides to the guest.
Purchase the Optional Installer’s Remote
To perform a normal installation set up, you need an installer’s remote like the LP702. The LP702 is shown and described in later sections. The installer remote allows access to the Installer’s menus, and User menus. The installer remote has Menu, Select, and Adjust Keys (Down/Left/Right arrow) keys. To purchase the LP702 remote, see your Zenith Dealer.
Note: Design and specifications are subject to change without prior notice.
ConciergeTM is a trademark of Zenith Electronics Corporation |
P A G E 5 |
Antenna Hook Up
Connect an over-the-air antenna to the Concierge TV
1 |
Locate the Antenna/Cable jack on the back of the |
|
Concierge TV. |
2 |
Connect the antenna wire that runs from the wall, |
|
according to one of the diagrams to the right. |
3 |
Remove the back of the remote and put in two AA |
|
batteries. |
Back of
Remote
|
TV Back |
Antenna |
|
Flat Wire |
ANTENNA |
(300 ohm) |
CABLE |
|
SPEAKER |
|
OUT |
VIDEO |
AUDIO |
IN |
IN |
TV Back Panel 300/75 ohm (Expanded View)
Adapter
4 |
Plug in the TV. The TV is designed to operate on |
|
|
standard current, 120-volt 60 Hertz AC. Do not |
|
|
attempt to operate it on DC power. |
TV Back |
|
|
|
|
120 V AC |
Antenna |
|
60 Hz |
|
5 |
Go to page 11 to Auto Program the TV. |
If you have a 75 ohm RF cable, then you don’t need any adapters!
A 300 to 75 ohm adapter is not included with the Zenith Concierge TV.
ANTENNA
|
CABLE |
SPEAKER |
|
|
|
|
|
OUT |
RF Coaxial Wire |
VIDEO |
AUDIO |
IN |
IN |
|
(75ohm) |
|
|
|
TV Back Panel |
|
|
(Expanded View) |
|
Mini glossary
75 OHM RF CABLE
300 TO 75 OHM ADAPTER
The wire that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire sticking through the middle, and it screws onto the threaded jack on the back of your TV.
A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack. They are usually about an inch long with two screws on one end and a round opening with a wire sticking out on the other end.
P A G E 6
Cable Service Hook Up (CATV)
Connect cable service to the Concierge TV
|
Cable TV |
|
|
Wall Jack |
|
1 |
Locate the Antenna/Cable jack on the back of the |
|
|
Concierge TV. |
|
2 |
Connect the cable service wire that runs from the wall, |
|
|
according to one of the diagrams to the right. |
|
3 |
Remove the back of the remote and put in two AA batter- |
|
|
ies. |
|
|
RF Coaxial Wire |
|
|
|
(75ohm) |
|
Back of |
|
|
Remote |
|
4 |
Plug in the TV. The Concierge TV is designed to operate |
|
|
on standard current, 120-volt 60 Hertz AC. Do not |
|
|
attempt to operate it on DC power. |
|
|
Cable TV |
|
|
Wall Jack |
|
|
120 V AC |
|
|
60 Hz |
|
5 |
Go to page 11 to Auto Program the Concierge TV. |
|
|
|
|
|
In |
Cable Box |
|
Out |
Output |
|
Switch 3 4 |
|
|
If you’re using a cable box, leave the TV tuned to channel 3 |
|
|
|
|
|
or 4 and use the cable box to change channels. |
|
|
If you’re using a cable box, Auto Program might only find the |
RF Coaxial Wire |
|
channel your cable service is on (usually channel 3 or 4). |
|
|
(75ohm) |
TV Back
ANTENNA
CABLE
SPEAKER
OUT
VIDEO
IN
AUDIO
IN
TV Back Panel
(Expanded View)
TV Back
ANTENNA
CABLE
SPEAKER
OUT
VIDEO |
AUDIO |
IN |
IN |
|
TV Back Connections Panel
(Expanded View)
P A G E 7
Antenna With VCR Hook Up
Antenna
Connect an off-air antenna and VCR to the Concierge TV
1 |
Locate the Antenna/Cable jack on the back of |
TV Back |
|
the VCR. |
|||
|
|
||
2 |
Connect the antenna wire that runs from the |
|
|
|
antenna, according to one of the diagrams to |
|
|
|
the right. Make other connections as needed. |
|
Flat wire |
VCR Back |
(300 ohm) |
|
VCR Back AV Panel |
|
|
output |
In |
switch 3 4 |
300/75 |
Audio Video |
Adapter |
|
Out |
|
3 Remove the back of the remote and put in two AA batteries.
Back of
Remote
4 Plug in the TV. The Concierge TV is designed to operate on standard current, 120-volt 60 Hertz AC. Do not attempt to operate it on DC power.
|
120 V AC |
|
60 Hz |
5 |
Go to page 11 to Auto Program the TV. |
No A/V cables are included with the TV.
ANTENNA
CABLE
SPEAKER
OUT
VIDEO |
AUDIO |
IN |
IN |
TV Back Panel |
|
|
|
(Expanded View) |
|
|
|
Antenna |
|
|
|
|
|
VCR Back |
|
TV Back |
VCR Back AV Panel |
|
|
|
|
output |
|
|
In |
switch 3 |
4 |
RF Coaxial Wire |
|
Audio Video |
|
(75ohm) |
Out |
|
|
ANTENNA
CABLE |
SPEAKER |
|
|
OUT |
|
|
|
A/V Cables |
VIDEO |
|
Not included |
AUDIO |
with TV |
|
IN |
IN |
|
TV Back Panel
(Expanded View)
P A G E 8
Cable Service (CATV) with VCR Hook Up
Cable TV
Wall Jack
Connect a VCR and Cable service to the Concierge TV
TV Back
1 |
Locate the Antenna/Cable jack on the back |
|
of the VCR. |
||
|
||
2 |
Connect the cable service wire that runs |
|
|
from the wall, according to one of the dia- |
|
|
grams to the right. Make other connections |
|
|
as needed. |
|
3 |
Remove the back of the remote and put in |
|
|
two AA batteries. |
|
|
Back of |
|
|
Remote |
|
4 |
Plug in the TV. The Concierge TV is designed |
|
|
to operate on standard current, 120-volt 60 |
|
|
Hertz AC. Do not attempt to operate it on |
|
|
DC power. |
ANTENNA
|
CABLE |
SPEAKER |
|
|
|
OUT |
|
Super |
|
|
|
Port |
VIDEO |
AUDIO |
|
IN |
|||
|
IN |
||
|
|
TV Back Panel
(Expanded View)
Cable TV
Wall Jack
In |
Cable Box |
Output |
Out |
Switch 3 |
4 |
RF Coaxial Wire
(75ohm)
|
120 V AC |
|
60 Hz |
5 |
Go to page 11 to Auto Program the TV. |
Leave the VCR and the television tuned to channel three and use the cable box to change channels.
No A/V cables are included with the TV.
TV Back |
RF Coaxial Wire |
(75ohm) |
ANTENNA
CABLE
SPEAKER
OUT
VIDEO |
AUDIO |
|
IN |
||
IN |
||
|
VCR Back
VCR Back AV Panel
|
Output |
In |
Switch 3 4 |
Out |
Audio Video |
|
A/V Cables
Not included with TV
VCR Back
VCR Back AV Panel
|
Output |
In |
Switch 3 4 |
Out |
Audio Video |
|
A/V Cables
Not included with TV
TV Back Panel
(Expanded View)
P A G E 9
External Speaker Hook Up
Connect an external speaker to the TV
Speaker back
1 |
Locate the Audio In jack on the back of the exter- |
|
nal speaker. |
2 |
Connect a standard audio cable from the Speaker |
|
Out jack on the TV, to the Audio In jack on the |
external speaker.
Audio In
TV Back
ANTENNA
CABLE
SPEAKER
OUT
VIDEO |
AUDIO |
|
IN |
||
IN |
||
|
TV Back Panel
(Expanded View)
P A G E 1 0
Auto Program (Channel Search)
Use Auto Program to specify Antenna or cable service incoming signal source and automatically store all of the channels that are found by channel search
1 |
|
|
|
Using an Installer remote control, press the POWER key to |
|
|
|
|
turn on the Concierge TV. |
2 |
|
|
|
Press the MENU key to show the SETUP MENU. |
3 |
|
|
|
Using SELECT on the remote control, highlight AUTO |
|
|
|
|
PROGRAM on the screen. |
4 |
|
|
|
Use the Right or Left ADJ (Adjust) arrow to go to the Auto |
|
|
|
|
Program menu. |
5 |
|
|
|
Using SELECT, choose either CABLE TV or OFF AIR ANTENNA |
|
|
|
|
on your screen. |
6 |
|
|
|
Press the Right or Left ADJ arrow key to begin the Channel |
|
|
|
|
Search. |
7 |
|
|
|
Press ENTER when the channel search is complete. |
|
|
|
|
Note: Auto Program finds channels being received by the TV |
|
|
|
|
|
|
|
|
|
tuner. |
|
|
|
|
|
|
|
|
|
Cable will not work unless the lodge provides a cable service. |
|
|
|
|
|
|
|
|
|
|
SETUP MENU
AUTO PROGRAM |
TO PROGRAM |
ADD/DEL/BLNK |
|
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
LANGUAGE
|
POWER |
|
|
1 |
CC |
|
MUTE |
FLSHBK |
|||
|
TV/FM |
|
|
|
UME |
|
|
|
VOL |
CHANNEL |
|
|
|
||
|
1 |
2 |
3 |
|
4 |
5 |
6 |
|
7 |
8 |
9 |
|
0 |
|
ENTER |
|
|
|
7 |
|
|
|
2 |
|
TIMER |
MENU |
ALARM |
3/5 |
|
SELECT CH PREVIEW |
|
|
|
|
|
|
ADJ |
|
ADJ |
4/6
Mini glossary |
|
OFF AIR ANTENNA |
If the guest can only view over-the-air broadcasts, select Antenna. |
CABLE |
If you provide cable service to your guests, select Cable. |
P A G E 1 1
Front Panel Controls
Use the front control panel to access the menus or just operate the TV
Note: Item 11 Key Defeat, in the installer’s menu allows the installer to:
Set Menu Option 11, Key defeat to “0” - Front panel controls give access to menus. Set Menu Option 11, Key defeat to “1” - Menus not available with front panel controls.
1
2
3
4
5
A
B
C
D
E
F
Press POWER to turn on your TV.
To access the menus, press the MENU button on the control panel. Cycle through the various menus by pressing MENU repeatedly.
Use the SELECT button to highlight the option you want to modify.
Use either the Right or Left ADJUST button to modify the option you have chosen.
Press CAPTIONS to turn captions on and off.
The menu will disappear after a few seconds.
TV Operation
Power turns the TV on and off.
Channel Up/Down tunes to next channel.
Volume Up/Down adjusts sound level.
Captions turns selected Caption/Text option on and off.
Camport: Front Audio/Video Inputs
Video Input
L-Audio-R Inputs
Note: TV sound is always monaural. Left/Right Audio input is processed into monaural sound by the TV.
Front panel control menu operation buttons are not labeled and are not usually available to the guest.
You can use Channel to tune to available channels and Volume to set the sound level, regardless of the key defeat setting.
Typical Front Panel Controls
captions |
volume |
channel |
power |
5/D |
C |
1/A |
B
adjust select menu
video in |
L audio R |
|
|
F |
2 |
E
4 3
P A G E 1 2
Guest Remote Key Functions
A brief overview of the keys on the guest remote and what they do
POWER
Turns TV On or Off.
CC (CLOSED CAPTIONING)
Press to access closed captions. Press ENTER to exit.
VOLUME LEFT/RIGHT
Adjusts the sound level.
ENTER
Press to view the Channel/Time display or to remove any on-screen display or menu.
TIMER
Press repeatedly to choose a TV turn-off time, up to 4-hours.
Use to pick AM/PM in the Alarm menu.
POWER |
|
|
MUTE |
CC |
FLSHBK |
|
|
UME |
|
VOL |
CHANNEL |
|
1 2 3
4 5 6
7 8 9
0 ENTER
TIMER |
ALARM |
CH PREVIEW
remote control part number
SC652Z
124-213-18 6710V00108A
MUTE
Turns sound Off and On, while the picture remains.
FLASHBK (FLASHBACK)
Returns to the last channel viewed.
CHANNEL (UP/DOWN)
Scrolls through available channels, and the Video Channel (Audio/Video source).
NUMBER KEYPAD
Selects channels directly: enter channel numbers and press ENTER to go to new channel.
ALARM
Press to display menu, then follow onscreen instructions to set a TV turn-on time.
CHANNEL PREVIEW
Displays the available TV channels, including access to guest’s Parental Control menu. Allows guest to select the Aux Channel. (Use the Audio/Video jacks on the back of the TV as the source of the picture and sound.)
P A G E 1 3
Installer Remote Key Functions
An overview of the keys on the LP702 installer’s remote and what they do
POWER
Turns TV On or Off.
CC (CLOSED CAPTIONING)
Press to access closed captions. Press ENTER to remove menu.
TV/FM
Selects TV or Radio on TVs equipped with FM radio.
VOLUME LEFT/RIGHT
Adjusts the sound levels.
ENTER
Press to view the Channel/Time display or to remove any on-screen display or menu.
TIMER
Press repeatedly to choose a TV turn-off time, up to 4-hours.
Use to pick AM/PM in the Clock/Alarm menus, on some TVs.
MENU/SELECT/ADJ (ADJUST)
Press MENU repeatedly to scroll through either the Installer, or User menus. Use SELECT to choose an option and ADJ (adjust) to change the selected option.
POWER
MUTE
|
FLSHBK |
CC |
|
TV/FM |
|
UME |
|
VOL |
CHANNEL |
|
1 2 3
4 5 6
7 8 9
0 ENTER
TIMER MENU |
ALARM |
SELECT |
CH PREVIEW |
ADJ |
ADJ |
MUTE
Turns sound Off and On, while the picture remains.
FLASHBK (FLASHBACK)
Returns to the last channel viewed.
CHANNEL (UP/DOWN)
Tunes to next available channel.
NUMBER KEYPAD
Selects channels directly and enters numeric values for some options.
ALARM
Press to go to the Alarm menu. Set a time for the TV to turn itself on.
CHANNEL PREVIEW
Gives installer access to the guest’s menus. Displays the available TV channels and hotel guest’s Parental Control menu.
remote control part number
LP702
124-213-04
P A G E 1 4