Loading...
Thermal Printer
User’s Manual
2844 
User’s Manual No. 980348-001 Rev. A
©2001 Zebra Technologies Corporation
ii |
980348-001 Rev. A |
FOREWORD
This manual provides installation and operation information for the LP 2844 and the TLP 2844 series printers, manufactured by Zebra Technologies Corporation, Camarillo, California.
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation. This document and the information contained within is copyrighted by Zebra Technologies Corporation and may not be duplicated in full or in part by any person without written approval from Zebra Technologies Corporation. While every effort has been made to keep the information contained within current and accurate as of the date of publication, no guarantee is given or implied that the document is error-free or that it is accurate with regard to any specification. Zebra Technologies Corporation reserves the right to make changes, for the purpose of product improvement, at any time.
TRADEMARKS
LP 2844 and TLP 2844 are service marks of Zebra Technologies Corporation. Windows and MS-DOS are registered trademarks of Microsoft Corp. All other marks are trademarks or registered trademarks of their respective holders.
LP 2844 and TLP 2844 Thermal Printers
European Council Directive |
Compliance to Standards |
||
89/336/EEC |
EMC Directive |
EN 55022-B 1998 |
RF Emissions control |
|
EMC Directive |
EN 55024 1998 |
Immunity to Electro- |
|
magnetic Disturbances |
||
|
|
|
|
92/31/EE |
EMC Directive |
EN 61000-3-2 |
Harmonic Emissions |
92/31/EE |
EMC Directive |
EN 61000-3-3 |
Voltage Variation |
|
CB Scheme |
EN 60950 1991 |
Safety |
|
A1, A2, A3, A4 |
||
|
|
|
|
|
|
|
|
FCC - DECLARATION OF CONFORMITY:
Models: LP 2844 and TLP 2844 conform to the following specification:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a) Class B digital device
Supplemental Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following Two Conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada ICS-003 class B requirements.
Cet equipement est conforme a l’ICS-003 classe B de la norm Industrielle Canadian
980348-001 Rev. A |
iii |
SHOCK HAZARD WARNING:
The printer and power supply should never be operated in a location where either one can get wet. Personal injury could result.
MEDIA AND RIBBON WARNING:
Always use high quality, approved labels, tags and ribbons. If adhesive backed labels are used that DO NOT lay flat on the backing liner, the exposed edges may stick to the label guides and rollers inside the printer, causing the label to peel off from the liner and jam the printer. Permanent damage to the print head may result if a non-approved ribbon is used as it may be wound incorrectly for the printer or contain chemicals corrosive to the print head. Approved supplies can be ordered from your dealer.
RELOADING HINT:
If labels or ribbon run out while printing, DO NOT turn the power switch OFF (0) while reloading or data loss may result. The printer automatically restarts after you load a new label or ribbon roll.
STATIC DISCHARGE:
The discharge of electrostatic energy that accumulates on the surface of the human body or other surfaces can damage or destroy the print head or electronic components used in this device. DO NOT TOUCH the print head or the electronic components under the top cover.
THERMAL PRINTING:
The print head becomes hot while printing. To protect from damaging the print head and risk of personal injury, avoid touching the print head. Use only the cleaning pen to perform maintenance.
iv |
980348-001 Rev. A |
TABLE OF CONTENTS
Installation and Operation . . . . . . . . . . . . . . . . . . |
1 |
Unpack Your Printer . . . . . . . . . . . . . . . . . . . . . . |
2 |
Know Your Printer . . . . . . . . . . . . . . . . . . . . . . . |
2 |
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
AutoSense Media Gap Sensing . . . . . . . . . . . . . . . . |
9 |
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . |
12 |
Using Options . . . . . . . . . . . . . . . . . . . . . . . . |
13 |
Using Transfer Ribbon . . . . . . . . . . . . . . . . . . . . . |
14 |
Using the Label Dispenser . . . . . . . . . . . . . . . . . . . |
19 |
Using Fan-Fold Media . . . . . . . . . . . . . . . . . . . . . |
20 |
Using the Media Cutter . . . . . . . . . . . . . . . . . . . . |
21 |
Appendix A - Troubleshooting . . . . . . . . . . . . . . . . |
23 |
Serial Interface Cable Wiring. . . . . . . . . . . . . . . . . . |
27 |
Parallel Interface Cable Wiring . . . . . . . . . . . . . . . . . |
28 |
Universal Serial Bus (USB). . . . . . . . . . . . . . . . . . . |
29 |
Cleaning the Print Head . . . . . . . . . . . . . . . . . . . . |
30 |
Cleaning the Platen . . . . . . . . . . . . . . . . . . . . . . |
31 |
980348-001 Rev. A |
v |
vi |
980348-001 Rev. A |
1 Installation and Operation
This section provides information on the installation and operation of the printer.
The printer is a low cost, desktop thermal printer. The printer is specifically designed for printing labels, tags or continuous receipts (with or without bar codes) from any DOS™, Windows™or ASCII-based compatible host. There are two models of the printer.
980348-001 Rev. A |
1 |
Installation and Operation
Unpack Your Printer
Know Your Printer
2 |
980348-001 Rev. A |
Installation and Operation
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
||
980348-001 Rev. A |
|||||||||||||
Installation and Operation
Installation The following steps will guide you through the installation of the printer and software.
Step Attach Power Supply To The Printer
Power OFF
Check Voltage
Plug in
Power
Module
Plug in
Power
Cord
Plug Power Cord
into a Suitable
AC Outlet
See the SHOCK HAZARD WARNING on page iv.
4 |
980348-001 Rev. A |
Installation and Operation
Step Attach Interface Cable
Serial
Parallel
Universal Serial Bus
(USB)
See Appendix A for cable wiring information.
980348-001 Rev. A |
5 |
Installation and Operation
Step Load Media
Power ON
MOVIE |
Open Cover
Open Guides
6 |
980348-001 Rev. A |
Loading...