Zanussi ADM, 860430, 860412, ADAU, 860413 User Manual

RANGE

COMPOSITION

The range of water softeners has been specifically designed for the range of ovens and single tank dishwashers in order to provide an economical form of water treatment that will reduce the build up of scale on the crockery and inside the machine itself.

The range consists of 4 models, 3 models for dishwashers including automatic and manual versions for ovens.

FUNCTIONAL AND CONSTRUCTION FEATURES

WATER SOFTENER ADM2

The water softener ADM2 has been designed specifically for medium sized dishwashers such as LS9, LS10 e LS14.

Operating pressure between 1 and 8 bar.

Incorporates 20 litre cylinder in stainless steel AISI 304 with 15 litres of resin

Every regeneration cycle requires 2,5 kg salt consumpition.

Water connection between 5°C to 15°C.

Maximum flow rate 1000 l/h.

Quantity of soft water depending on hardness according to French regulation: 20°- 1900 lt

30°- 1500 lt 40°- 1350 lt 60°- 1050 lt 80°- 750 lt

Quantity of soft water depending on hardness according to German regulation: 11°- 1900 lt

17°- 1500 lt 22°- 1350 lt 33°- 1050 lt 44°- 750 lt

All models comply with the standards required by the main international approval

bodies and are H marked.

ADM2-ADM-ADAU

WATER SOFTENERS ZANUSSIP R O F E S S I O N A L

WATER SOFTENER ADM

ADM has been designed specifically for smaller dishwashers such as LS5, LS6 and LU7.

Operating pressure between1 and 8 bar.

Incorporates 12 litre cylinder in stainless steel 304 AISI with 9 litres of resin.

Every regeneration cycle requires 1,5 kg of salt.

Water connection between 5°C to 15°C.

Maximum flow rate 1000l/h.

Quantity of soft water depending on hardness according to French regulation: 20°- 1900 lt

30°- 1500 lt 40°- 1350 lt 60°- 1050 lt 80°- 750 lt

Quantity of soft water depending on hardness according to German regulation: 11°- 1900 lt

17°- 1500 lt 22°- 1350 lt 33°- 1050 lt 44°- 750 lt

WATER SOFTENER ADAU

ADAU has been designed specifically for smaller dishwashers such as LS5 and LS6 and LU7 and consists of 2x24 volt solenoid valves that are linked to an electronic control board that set the regenerating cycles.

Automatic regeneration allows programming of 3 regeneration cycles per week: 1 every week, 2 every 4 days, 3 every 2 days.

Operating pressure between 2 and 8 bar.

Includes back up battery to store input data during power cuts

Semi automatic regeneration is via push button.

Incorporates 8 litre cylinder in stainless steel 304 AISI with 5,6 litres of resin.

Min/maximum flow rate 400/900 l/h.

Every regeneration cycle requires 1 kg of salt.

Water connection between 5°C and 15°C.

TECHNICAL DATA
CHARACTERISTICS		MODELS
	ADM2	ADM	ADAU
	860430	860412	860413
External dimensions - mm
width	190	190	245
depth	190	190	480
height	900	515	560
Net weight - kg.	19	19	19