Yamaha NS-AP9600E, NS-AP9500M User Manual

0 (0)

NS-AP9500M/NS-AP9600E

HOME CINEMA SPEAKER PACKAGE

CONTENTS

 

CONSUMER PRECAUTIONS ............................................................................

2

UNPACKING .......................................................................................................

3

SETTING UP THE SPEAKERS ..........................................................................

4

CONNECTIONS TO THE RECEIVER ................................................................

7

SPEAKER PLACEMENT ....................................................................................

8

REMOVING THE FRONT GRILL .......................................................................

8

SPECIFICATIONS ..............................................................................................

9

OWNER’S MANUAL

CONSUMER PRECAUTIONS

Read these precautions carefully before setting up your NS-AP9500M/9600E speakers.

Since these speakers can be wall mounted, it is essential that they are firmly secured. Be sure to consult a reliable source about the best type of hanger for your particular wall’s construction. Secure installation is the purchaser’s responsibility.

Do not attach them to thin plywood or soft wall surface materials as the screws may tear free, causing the speakers to fall and be damaged, or result in personal injury.

Do not fasten the speakers to walls with nails, adhesives, or other unsafe hardware. Long-term use and vibrations may cause them to pull free.

Do not place the speakers where they are liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance.

Placing the speakers on the same stand or shelf as a turntable can result in feedback.

This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move the speaker away from the TV set.

Never touch the woofer or tweeter units with your hands or expose them to excessive physical shock. If they are dented or bent, the sound will be distorted.

Lower the power amplifier / receiver volume control before changing input sources. Never change input sources (for example, FM to CD) at high listening levels. Always turn the receiver / amplifier unit off when installing or removing input cables.

Anytime you note distortion, reduce the volume control on your power amplifier / receiver to a lower setting. Never allow your power amplifier to be driven into “clipping”.

Do not attempt to clean the speakers with chemical solvents as this might damage the finish. To clean wipe with a dry, soft cloth.

To prevent the enclosure from warping or discoloring, do not place the speakers where they will be exposed to direct sunlight or excessive humidity.

To prevent the speakers from falling over, select a location which is flat and stable.

To avoid accidents resulting from tripping over loose speaker cables and to prevent the speakers from falling, fix the speaker cables to the wall, etc.

Secure placement or installation is the owner’s responsibility.

YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers.

2

Yamaha NS-AP9600E, NS-AP9500M User Manual

 

UNPACKING

After unpacking, check that the following items are contained.

Front speakers x 2

Center speaker x 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(NS-AP9500S)

Surround speakers x 2

(NS-AP9600S)

(NS-AP9600C)

Fasteners for the center speaker x 2

Non-skid pads for Surround speakers x 2

Speaker cable x 1

3

Loading...
+ 7 hidden pages