Yamaha IF2112AS User Manual

0 (0)
Yamaha IF2112AS User Manual

SPEAKER SYSTEM

Installation Series

IF2115/AS(W), IF2112/AS(W)

OWNER'S MANUAL

Thank you for choosing this Yamaha speaker system. In order to take maximum advantage of the speaker's features and ensure optimum performance and longevity, please read this manual carefully before using the speaker system. Keep the manual in safe place for future reference.

BEDIENUNGSANLEITUNG

Vielen Dank für die Auswahl dieses Lautsprechersystems von Yamaha. Damit Sie die Eigenschaften dieses Lautsprechers optimal nutzen können, und um maximale Leistung und Lebensdauer sicherzustellen, lesen Sie bitte vor der Inbetriebnahme diese Anleitung sorgfältig durch. Bitte bewahren Sie diese Anleitung zum späteren Nachschlagen an einem sicheren Ort auf.

MODE D’EMPLOI

Nous vous remercions d'avoir acheté ces enceintes Yamaha. Pour obtenir les performances optimales de vos enceintes et garantir une longévité maximale, lisez attentivement ce mode d'emploi avant d'utiliser les enceintes. Conservez-le en lieu sûr pour pouvoir vous y référer ultérieurement.

MANUAL DE INSTRUCCIONES

Gracias por escoger este sistema de altavoces Yamaha. A fin de aprovechar al máximo las características de los altavoces y obtener un rendimiento y durabilidad óptimos, lea atentamente este manual antes de utilizar el sistema. Guarde este manual en un lugar seguro para futuras consultas.

Español Français Deutsch English

EN

DE

FR

ES

JA

English

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following:

Location

If you use a stand, make sure to observe the following precautions in order to avoid toppling the device or causing damage to the internal components.

-Check the stand’s specifications and make sure that it is sturdy enough to support the weight of the speaker.

-Mount only one speaker on each speaker stand.

-Use the supplied screws if included.

-Tighten fastening screws securely.

-Use the speaker stands with their legs fully opened.

-Use the stand at a height of less than 140cm.

-Add weight such as sand bags around the stand legs to prevent them from falling over.

-Remove the speakers from the stands before moving the stands or adjusting their height.

-Limit the number of people around the placed stand.

We recommend using the speaker stands manufactured by Ultimate Systems (sold separately) to support the speakers.

Always consult qualified Yamaha service personnel if the device installation requires construction work, and make sure to observe the following precautions.

-Choose mounting hardware and an installation location that can support the weight of the device.

-Avoid locations that are exposed to constant vibration.

-Make sure to use the specified hardware.

-Inspect the device periodically.

When transporting or moving the device, always use two or more people. Attempting to lift the device by yourself may damage your back, result in other injury, or cause damage to the device itself.

Before moving the device, remove all connected cables.

Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.

Do not place the device in an unstable position where it might accidentally fall over.

Connections

Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.

Use only speaker cables for connecting speakers to the speaker jacks. Use of other types of cables may result in fire.

Handling caution

When choosing a power amplifier to use with your speakers, make sure that its power output matches the speakers’ power capacity (refer to the Specifications on page 14). Even if the amplifier’s power output is lower than the speakers’ power capacity, the speakers may be damaged when clipping of a high input signal occurs. The following may cause damage to speakers:

-Feedback caused when using a microphone.

-Continuous high sound pressure level produced by electronic instruments.

-Continuous high-power output of distorted signals.

-Popping noises caused by turning on equipment, or by connecting or disconnecting system components while the amplifier is turned on.

When turning on the AC power in your audio system, always turn on the power amplifier LAST, to avoid speaker damage. When turning the power off, the power amplifier should be turned off FIRST for the same reason.

Do not operate this device at high volume levels or at a level that is uncomfortable, since it is capable of producing sound levels that could cause permanent hearing loss. If you experience any discomfort or ringing in the ears, or suspect an hearing loss, you should consult an audiologist.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the device.

*Illustrations herein are for explanatory purposes only, and may not match actual appearance during operation.

*Company names and product names herein are trademarks or registered trademarks of their respective companies.

For details on signal processor settings when driving speakers with the use of multiple power amplifiers, please refer to the web site below.

Yamaha Pro Audio global web site

http://www.yamahaproaudio.com/

(6)-1

Loading...
+ 4 hidden pages