Yamaha htr-5890 User Manual

4 (1)

U

HTR-5890

AV Receiver

OWNER'S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1Read Instructions – All the safety and operating instructions should be read before the product is operated.

2Retain Instructions – The safety and operating instructions should be retained for future reference.

3Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4Follow Instructions – All operating and use instructions should be followed.

5Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a clean, dry cloth for cleaning.

6Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9A product and cart combination should be moved with care. Quick stops, excessive force, and uneven

surfaces may cause the product and cart combination to overturn.

10Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

15Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a)When the power-supply cord or plug is damaged,

b)If liquid has been spilled, or objects have fallen into the product,

c)If the product has been exposed to rain or water,

i

d)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

e)If the product has been dropped or damaged in any way, and

f)When the product exhibits a distinct change in perfor-

mance - this indicates a need for service.

20Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

21Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

23Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

IMPORTANT SAFETY INSTRUCTIONS

24Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

MAST

ANTENNA

 

LEAD IN

 

WIRE

GROUND

 

CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810–20)

ELECTRIC

 

SERVICE

 

EQUIPMENT

GROUNDING CONDUCTORS

 

 

(NEC SECTION 810–21)

 

GROUND CLAMPS

 

POWER SERVICE GROUNDING

 

ELECTRODE SYSTEM

 

(NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

 

FCC INFORMATION (for US customers)

1IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

ii

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.

11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.

14Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty.

17Before moving this unit, press STANDBY/ON to set this unit in the standby mode, and disconnect the AC power plug from the wall outlet.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

iii

CONTENTS

INTRODUCTION

 

FEATURES.............................................................

2

GETTING STARTED............................................

3

Supplied accessories ..................................................

3

Installing batteries in the remote control ...................

3

CONTROLS AND FUNCTIONS .........................

4

Front panel.................................................................

4

Remote control...........................................................

6

Using the remote control ...........................................

8

Front panel display ....................................................

9

Rear panel ................................................................

11

PREPARATION

 

SPEAKER SETUP ...............................................

12

Speaker placement ...................................................

12

Speaker connections ................................................

13

CONNECTIONS ..................................................

17

Before connecting components................................

17

Connecting video components.................................

18

Connecting audio components.................................

21

Connecting the antennas..........................................

23

Connecting the power supply cord ..........................

24

Speaker impedance setting ......................................

25

Turning on the power...............................................

25

AUTO SETUP.......................................................

26

Introduction..............................................................

26

Optimizer microphone setup....................................

26

Starting the setup .....................................................

27

BASIC SETUP ......................................................

31

Using BASIC MENU ..............................................

31

PLAYBACK..........................................................

33

BASIC OPERATION

 

Basic operations.......................................................

33

Selecting sound field programs ...............................

34

Additional operations...............................................

35

Selecting input modes..............................................

40

TUNING ................................................................

41

Automatic and manual tuning..................................

41

Presetting stations ....................................................

42

Selecting preset stations...........................................

44

Exchanging preset stations ......................................

44

RECORDING .......................................................

45

SOUND FIELD PROGRAMS

 

SOUND FIELD PROGRAM

 

DESCRIPTIONS...............................................

46

For movie/video sources..........................................

46

For music sources ....................................................

49

ADVANCED OPERATION

 

ADVANCED OPERATIONS ..............................

50

Selecting the OSD mode..........................................

50

Using the sleep timer ...............................................

50

Manually adjusting speaker levels...........................

51

Using the test tone ...................................................

52

SET MENU............................................................

53

Using SET MENU...................................................

54

Using SOUND MENU ............................................

55

Using INPUT MENU ..............................................

60

Using OPTION MENU ...........................................

62

REMOTE CONTROL FEATURES ...................

65

Control area .............................................................

65

Setting remote control codes ...................................

66

Programming codes from other remote controls

 

(Learn) .................................................................

68

Changing source names in the display window.......

70

Using the Macro feature ..........................................

71

Clearing function sets ..............................................

73

Clearing individual functions ..................................

74

Controlling each component....................................

76

ZONE 2/ZONE 3...................................................

77

Zone 2/Zone 3 connections......................................

77

Remote controlling Zone 2/Zone 3..........................

78

ADDITIONAL INFORMATION

 

EDITING SOUND FIELD PARAMETERS ......

80

What is a sound field? .............................................

80

Changing parameter settings ...................................

80

SOUND FIELD PARAMETER

 

DESCRIPTIONS...............................................

82

TROUBLESHOOTING .......................................

86

GLOSSARY...........................................................

91

Audio formats ..........................................................

91

Sound field programs...............................................

92

Audio information ...................................................

93

Video signal information .........................................

94

SPECIFICATIONS...............................................

95

INTRODUCTION

 

 

 

 

 

PREPARATION

 

 

 

 

 

OPERATION

BASIC

 

 

 

 

PROGRAMS

FIELD SOUND

 

 

 

 

OPERATION

ADVANCED

 

 

 

 

INFORMATION

ADDITIONAL

 

 

1

FEATURES

Built-in 7-channel power amplifier

Minimum RMS output power (0.04% THD, 20 Hz – 20 kHz, 8 ) Front: 120 W + 120 W

Center: 120 W

Surround: 120 W + 120 W Surround Back: 120 W + 120 W

Sound field features

Proprietary YAMAHA technology for the creation of sound fields

THX Select

Dolby Digital/Dolby Digital EX decoder

DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6 decoder, DTS 96/24

Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic IIx Decoder

Virtual CINEMA DSP

SILENT CINEMA

Sophisticated AM/FM tuner

40-station random access preset tuning

Automatic preset tuning

Preset station shifting capability (preset editing)

Other features

YPAO: YAMAHA Parametric Room Acoustic Optimizer for automatic speaker setup

192-kHz/24-bit D/A converter

SET MENU to optimize this unit for your audio/video system

6 or 8-channel additional input jacks for discrete multi channel input

On-screen display function helpful in controlling this unit

PURE DIRECT for pure fidelity sound with analog and PCM sources

S-video signal input/output capability

Component video input/output capability

Video signal conversion (composite video S-video component video) capability for monitor out

Optical and coaxial digital audio signal jacks

Sleep timer

Cinema and music night listening mode

Remote control with preset remote control codes and learning/macro capability

Zone 2/Zone 3 custom installation facility

y indicates a tip for your operation.

Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.

This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol are trademarks of Dolby Laboratories.

“SILENT CINEMA” is a trademark of YAMAHA CORPORATION.

“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of Digital Theater Systems, Inc.

THX and the THX logo are registered trademarks of THX Ltd. Surround EX is a jointly developed technology of THX and Dolby Laboratories, Inc. and is a trademark of Dolby Laboratories, Inc. All rights reserved. Used under authorization.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

2

GETTING STARTED

Supplied accessories

Please check that you received all of the following parts.

Remote control

Batteries (4)

Power Cord

Indoor FM antenna

 

 

 

SYSTEM

(AAA, R03, UM-4)

 

 

POWER

POWER

STANDBY

POWER

 

 

 

TV

AV

 

 

 

 

 

A

B

INPUT MODE

SLEEP

 

 

 

PHONO

TUNER

CD

MULTI CH IN

 

 

 

V-AUX

CBL/SAT

MD/TAPE

CD-R

 

 

 

DTV

VCR 1

DVR/VCR2

DVD

 

 

 

 

 

 

SELECT

 

 

 

+

+

+

AMP

 

 

 

 

Speaker terminal wrench

Optimizer microphone

AM loop antenna

TV VOL

CH

VOL

SOURCE

TV

 

 

 

 

A / B / C / D / E

 

 

 

 

 

TV MUTE

TV INPUT

MUTE

 

 

 

 

LEVEL

 

SET MENU

PURE DIRECT

 

 

 

TITLE

 

MENU

 

 

 

 

 

 

 

NIGHT

 

 

 

 

ENTER

 

AUDIO

 

 

 

TEST

 

ON SCREEN

STRAIGHT

 

 

 

RETURN

 

DISPLAY

 

 

 

 

 

 

 

EFFECT

 

 

 

STEREO

HALL

JAZZ

ROCK

 

 

 

1

2

3

4

 

 

 

ENTERTAIN

MUSIC

TV THTR

MOVIE

 

 

 

5

6

7

8

 

 

 

THX

STANDARD

 

EXTD. SUR

 

 

 

9

0

+10

ENT.

 

 

 

FREQ/RDS

EON

MODE PTY SEEK START

 

 

 

REC

 

 

 

 

 

 

DISC SKIP

 

 

 

 

 

 

OFF ON

MACRO LEARN CLEAR RE–NAME

 

 

 

Installing batteries in the remote control

2 1

3

1Press the part and slide the battery compartment cover off.

2Insert the four supplied batteries (AAA, R03, UM-4) according to the polarity markings on the inside of the battery compartment.

3Slide the cover back until it snaps into place.

Notes on batteries

Change all of the batteries if you notice conditions such as the operation range of the remote control decreases, the indicator does not flash, or its light or display window become dim.

Do not use old batteries together with new ones.

Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.

If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the remote control code and program any acquired functions that may have been cleared.

INTRODUCTION

3

CONTROLS AND FUNCTIONS

Front panel

1

2

3 4 5 6

7

8

9

0

A

 

 

 

 

 

 

 

 

 

VOLUME

 

 

 

PURE DIRECT

 

 

 

 

 

 

 

 

 

 

STANDBY

 

 

 

 

 

 

 

 

 

 

 

/ON

 

 

 

 

 

 

 

 

 

 

 

 

 

PRESET/TUNING

FM/AM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

 

 

 

 

OPTIMIZER

 

EDIT

 

 

 

MAN'L/AUTO FM

AUTO/MAN'L MONO

 

 

 

 

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

 

 

INPUT

 

 

 

 

 

PHONES

SPEAKERS

 

 

 

 

 

 

 

VIDEO AUX

 

 

A

B

STRAIGHT

 

TONE CONTROL

INPUT MODE

 

MULTI CH

 

 

 

 

 

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

EFFECT

 

 

 

 

 

 

 

 

 

SILENT CINEMA

 

 

 

 

 

 

S VIDEO

VIDEO

L AUDIO

R

OPTICAL

B C D E F G H I J K

1 STANDBY/ON

Turns on this unit or sets it to the standby mode. When you turn on this unit, you will hear a click and there will be a 6 to 7-second delay before this unit can reproduce sound.

Note

In standby mode, this unit consumes a small amount of power in order to receive infrared-signals from the remote control.

7 A/B/C/D/E

Selects one of the 5 preset station groups (A to E).

8 PRESET/TUNING l / h

Selects preset station number 1 through 8 when a colon (:) is displayed next to the band indication in the front panel display.

Selects the tuning frequency when the colon (:) is not displayed.

2 PURE DIRECT

Turns on or off the PURE DIRECT mode. Lights up when turned on (see page 37).

3 Remote control sensor

Receives signals from the remote control.

4 Front panel display

Shows information about the operational status of this unit.

5 PRESET/TUNING EDIT

Switches the function of PRESET/TUNING l/ h between selecting preset station numbers and tuning.

6 FM/AM

Switches the reception band between FM and AM.

9 MEMORY (MAN’L/AUTO FM)

Stores a station in the memory. Hold down this button for more than 3 seconds to start automatic preset tuning.

0 TUNING MODE (AUTO/MAN’L MONO)

Switches the tuning mode between automatic (AUTO indicator on) and manual (AUTO indicator off).

A VOLUME

Controls the output level of all audio channels. This does not affect the REC OUT level.

B OPTIMIZER MIC jack

Use to connect and input audio signals from the supplied microphone for use with the AUTO SETUP function (see page 26).

4

C PHONES (SILENT CINEMA) jack

Outputs audio signals for listening with headphones. When you connect headphones, no signals are output to the PRE OUT jacks or to the speakers.

All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

D SPEAKERS A/B

Turn on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed.

E STRAIGHT/EFFECT

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

F PROGRAM

Use to select sound field programs or adjust bass/treble balance (in conjunction with TONE CONTROL).

G TONE CONTROL

Use to adjust the bass/treble balance for the front left/right and center channels (see page 35).

H INPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of signals received when one component is connected to two or more of this unit’s input jacks (see page 40).

I INPUT selector

Selects the input source you want to listen to or watch.

J MULTI CH INPUT

Selects the source connected to the MULTI CH INPUT jacks. When selected, the MULTI CH INPUT source takes priority over the source selected with INPUT (or the input selector buttons on the remote control).

K VIDEO AUX jacks

Input audio and video signals from an external source such as a game console. To reproduce source signals from these jacks, select V-AUX as the input source.

CONTROLS AND FUNCTIONS

INTRODUCTION

5

CONTROLS AND FUNCTIONS

Remote control

This section describes the function of each control on the remote control used to control this unit. To operate other components, see “REMOTE CONTROL FEATURES” on page 65.

1

 

 

 

 

C

2

POWER

POWER

STANDBY

SYSTEM

 

 

POWER

 

 

TV

AV

 

 

D

 

A

B

INPUT MODE

SLEEP

E

 

 

 

 

 

F

 

PHONO

TUNER

CD

MULTI CH IN

 

 

 

 

 

 

G

3

V-AUX

CBL/SAT

MD/TAPE

CD-R

 

 

 

 

 

 

 

DTV

VCR 1

DVR/VCR2

DVD

 

4

 

 

 

SELECT

H

5

 

PRESET

 

AMP

I

 

+

+

+

 

 

 

J

 

TV VOL

CH

VOL

SOURCE

 

TV

 

6A / B / C / D / E

 

TV MUTE

TV INPUT

MUTE

 

K

 

LEVEL

 

SET MENU

PURE DIRECT

L

7

TITLE

 

MENU

 

 

 

 

 

 

NIGHT

M

 

 

 

 

 

 

8

 

ENTER

 

 

AUDIO

N

 

TEST

 

ON SCREEN

STRAIGHT

O

 

 

 

9

RETURN

 

DISPLAY

 

P

 

 

 

 

 

EFFECT

 

 

STEREO

HALL

JAZZ

ROCK

 

 

1

2

3

 

4

 

0

ENTERTAIN

MUSIC

TV THTR

MOVIE

 

5

6

7

 

8

 

 

THX

STANDARD

 

EXTD. SUR

Q

 

9

0

+10

ENT.

 

FREQ/RDS

EON

MODE

PTY SEEK START

 

 

REC

 

 

 

 

 

 

DISC SKIP

 

 

 

 

 

A

OFF ON

MACRO

LEARN

CLEAR RE–NAME

R

 

 

 

 

 

S

 

 

 

 

 

 

B

 

 

 

 

 

t

1 Infrared window

Outputs infrared control signals. Aim this window at the component you want to operate.

2 Transmission indicator

Flashes while the remote control is sending signals.

3 Input selector buttons

Select the input source and change the control area.

4 Display window

Shows the name of the selected source component that you can control.

5 PRESET +/–

Selects preset station numbers when this unit is in tuner mode.

6 A/B/C/D/E

Selects preset groups when this unit is in tuner mode.

7 LEVEL

Selects the speaker channel to be adjusted and sets the level.

8 Cursor buttons k / n / l / h / ENTER

Use to select and adjust DSP program parameters or SET MENU items.

9 TEST

Outputs the test tone to adjust the speaker levels.

0 Sound field program/Numeric buttons

Use to select sound field programs or input numbers. Use numbers 1 through 8 to select preset stations when this unit is in tuner mode.

A MACRO ON/OFF

Turns the macro function on and off.

B MACRO

Use to program a series of operations for control by a single button (see page 71).

C STANDBY

Sets this unit in the standby mode.

D SYSTEM POWER

Turns on the power of this unit.

E INPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of signals received when one component is connected to two or more of this unit’s input jacks (see page 40).

F SLEEP

Sets the sleep timer.

G MULTI CH IN

Selects MULTI CH INPUT when using an external decoder (etc.).

6

H SELECT k/n

Selects another component that you can control independently of the input component selected with the input selector buttons.

I VOL +/–

Increases or decreases the volume level.

J AMP/SOURCE/TV

Selects the component you want to control with the remote control.

AMP: Set to this position to operate this unit. SOURCE: Set to this position to operate the component selected with an input selector button.

TV: Set to this position to operate the television. To set the remote control codes for components, see page 66.

K MUTE

Mutes the sound. Press again to restore the audio output to the previous volume level. You can adjust how much the mute function reduces the output volume in the MUTE menu of the SET MENU mode (see page 59).

L PURE DIRECT

Turns on or off PURE DIRECT mode (see page 37).

M SET MENU

Selects the SET MENU mode.

N NIGHT

Turns on or off the night listening modes (see page 38).

O ON SCREEN

Selects the display mode of the on-screen display (OSD) this unit sends to your monitor.

P STRAIGHT/EFFECT

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

Q EXTD. SUR

Switches between 5.1 or 6.1/7.1 channel playback of multi-channel software.

R RE-NAME

Used to change the input source name in the display window (see page 70).

S CLEAR

Used to clear functions acquired when using the learn and rename features, or setting remote control codes (see page 73).

T LEARN

Used to set up the remote control code or program functions from other remote controls (see pages 66 and 68).

CONTROLS AND FUNCTIONS

INTRODUCTION

7

CONTROLS AND FUNCTIONS

Using the remote control

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.

Approximately 6 m (20 ft)

30 30

Handling the remote control

Do not spill water or other liquids on the remote control.

Do not drop the remote control.

Do not leave or store the remote control in the following types of conditions:

high humidity such as near a bath

high temperature such as near a heater or stove

extremely low temperature

dusty places

8

CONTROLS AND FUNCTIONS

Front panel display

1

96

MATRIX

 

NIGHT

SP

SILENT

 

5

YPAO

 

EON AUTO STEREO

 

9

INTRODUCTION

 

 

 

2

3

4

 

6

 

 

7 8

 

 

 

V–AUX

DVR/VCR2

VCR 1

CBL/SAT

DTV

DVD

MD/TAPE

CD–R

CD

TUNER

PHONO

 

 

24

DISCRETE

 

VIRTUAL

A B

CINEMA

 

 

HiFi DSP

 

MEMORY TUNED

 

dB

 

THX

DIGITAL

ZONE2

 

 

 

 

 

 

 

 

 

MUTE VOLUME

 

 

 

 

 

 

 

 

 

 

96/24

 

 

PCM

PL

PL

ZONE3

 

 

 

 

 

 

 

 

ft

 

L C R

 

 

EX

PL x

ZONE4

 

 

 

 

 

 

 

 

mS

LFE

SL SB SR

 

 

SLEEP

 

 

 

 

 

 

 

 

dB

 

 

 

 

 

 

 

 

 

 

 

 

 

0 A

 

 

B

C D E F

 

G

H

 

I J K L

MNO

 

 

 

 

 

P

 

 

 

 

 

 

 

 

 

 

 

1 Decoder indicators

When any of this unit’s decoders function, the respective indicator lights up.

2 Sound field indicators

Light to indicate the active DSP sound fields.

Presence DSP sound field

 

Listening position

Left surround

Right surround

DSP sound field

DSP sound field

Surround back DSP sound field

3 NIGHT indicator

Lights up when you select night listening mode.

4 Input source indicators

A cursor lights to show the current input source.

5 CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field program.

6 YPAO indicator

Lights up during the auto setup procedure and when the auto setup speaker settings are used without any modifications.

7 AUTO indicator

Lights up when this unit is in the automatic tuning mode.

8 STEREO indicator

Lights up when this unit is receiving a stereo signal for an FM stereo broadcast while the AUTO indicator is lit.

9 VOLUME level indicator

Indicates the volume level.

0 THX indicator

Lights up when a THX program is selected.

A PCM indicator

Lights up when this unit is reproducing PCM (pulse code modulation) digital audio signals.

B SLEEP indicator

Lights up while the sleep timer is on.

C VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see page 39).

D Headphones indicator

Lights up when headphones are connected.

E SP A B indicators

Light up according to the set of front speakers selected. Both indicators light up when both sets of speakers are selected, or when bi-wiring.

F SILENT CINEMA indicator

Lights up when headphones are connected and a sound field program is selected (see page 35).

G Multi-information display

Shows the current sound field program name and other information when adjusting or changing settings.

H HiFi DSP indicator

Lights up when you select a HiFi DSP sound field program.

I MEMORY indicator

Blinks to show a station can be stored.

J TUNED indicator

Lights up when this unit is tuned into a station.

K MUTE indicator

Blinks while the MUTE function is on.

9

CONTROLS AND FUNCTIONS

L 96/24 indicator

Lights up when a DTS 96/24 signal is input to this unit.

M LFE indicator

Lights up when the input signal contains an LFE signal.

N Input channel indicators

Indicate the channel components of current digital input signal.

OPresence and surround back speaker indicators

Indicate the connection of presence and/or surround back speakers when using the SPEAKERS setting (page 32) or SP LEVEL setting (page 57).

P ZONE 2/ZONE 3 indicators

Light up when Zone 2 or Zone 3 power is on.

10

CONTROLS AND FUNCTIONS

Rear panel

1

2

3

4

5

6

7

8

DIGITAL OUTPUT

 

AUDIO

 

AUDIO

VIDEO

 

COMPONENT VIDEO

RS-232C

OPTICAL

R

L

R

L

VIDEO

S VIDEO

PR

PB

Y

 

MD/TAPE

 

 

 

 

 

 

DVD

 

 

 

 

IN

 

 

 

 

 

 

 

 

 

 

 

 

DVD

 

 

 

 

 

 

(PLAY)

 

 

 

 

 

 

 

 

CD-R

MD/TAPE

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

DTV

 

DTV

 

 

 

 

 

 

 

 

 

 

 

 

 

(REC)

 

 

 

 

 

 

 

 

 

DIGITAL INPUT

 

 

 

 

 

 

 

 

 

 

CD

IN

 

 

 

CBL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(PLAY)

 

 

 

/SAT

 

 

 

 

 

DVD

CD-R

 

 

 

 

 

 

MONITOR OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

IN

 

 

TUNER

 

 

 

(REC)

 

 

 

 

 

 

 

 

DTV

 

 

VCR 1

AM

 

 

 

CD

 

OUT

ANT

R

L

 

 

 

CBL/SAT

PHONO

 

 

GND

 

 

 

 

 

FRONT

 

 

 

 

 

 

 

 

 

 

IN

FM ANT

R

L

 

 

 

 

 

 

 

DVR/

75

 

 

COAXIAL

FRONT (6CH)/SB (8CH)

 

VCR 2

UNBAL.

SURROUND

 

 

 

 

 

 

CD

 

 

OUT

 

 

 

 

 

 

 

 

SURROUND

ZONE 2

CD-R

 

SUB

 

DVD

 

 

 

 

WOOFER

CENTER

 

 

 

 

R

L

 

 

 

 

 

DVR/

 

 

 

 

SURROUND BACK

VCR 2

 

 

 

 

 

 

 

 

 

/PRESENCE

 

SUB

 

 

 

 

PRE OUT

 

ZONE 3

 

 

 

 

 

WOOFER CENTER

 

MONITOR OUT

 

 

GND

MULTI CH INPUT

OUTPUT

 

 

 

 

REMOTE

CONTROL OUT

IN OUT

 

 

 

 

 

+12V 15mA MAX.

 

 

R

+

A

+

L

 

 

 

 

 

 

 

 

FRONT

+

 

+

 

CENTER

 

B

 

+

 

 

 

 

 

 

 

 

 

 

 

SURROUND

 

 

 

 

 

R

+

 

+

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

L

 

 

 

 

 

 

 

+

 

R

+

 

+

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SURROUND BACK

SINGLE

 

PRESENCE/ZONE 2

 

 

 

SPEAKERS

 

 

 

 

 

AC OUTLETS

AC OUTLETS

 

 

 

 

 

 

B C

D

E

 

 

 

 

 

 

9 0 A

1 DIGITAL OUTPUT jacks

See page 21 for details.

2 Audio component jacks

See page 21 for connection information.

3 Video component jacks

See pages 18 and 20 for connection information.

4 RS-232C terminal

This is a control expansion terminal for commercial use. Consult your dealer for details.

5 REMOTE IN/OUT jacks

See page 77 for connection information.

6 CONTROL OUT jack

See page 77 for connection information.

7 AC OUTLET(S)

Use to supply power to your other A/V components (see page 24).

8 AC INLET

Use this inlet to plug in the supplied power cable (see page 24).

9 DIGITAL INPUT jacks

See pages 18, 20 and 21 for details.

0 MULTI CH INPUT jacks

See page 19 for connection information.

A ZONE 2/ZONE 3 OUTPUT jacks

See page 77 for connection information.

B Antenna terminals

See page 23 for connection information.

C PRE OUT jacks

See page 22 for connection information.

D Speaker terminals

See page 13 for connection information.

E PRESENCE/ZONE 2 speaker terminals

See page 14 for connection information.

INTRODUCTION

11

SPEAKER SETUP

Speaker placement

For best results, place the speakers as illustrated below.

PL

PR

 

C

FL

FR

30˚

SL

 

SR

 

 

60˚

SL

80˚

SR

 

SBL

SBR

More than 30 cm (12 in)

.

1.8 m (6 ft)

1.8 m (6 ft)

y

The illustrations show the standard speaker setting recommended by the ITU-R (see page 93). You can use it to enjoy CINEMA DSP, multi-channel audio sources, and THX.

Front speakers (FR and FL)

The front speakers are used for the main source sound plus effect sounds. Place these speakers an equal distance from the ideal listening position. The distance of each speaker from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system. Align the front face of the center speaker with the front face of your video monitor. Place the speaker centrally between the front speakers and as close to the monitor as possible, such as directly over or under it.

Surround speakers (SR and SL)

The surround speakers are used for effect and surround sounds. Place these speakers behind your listening position, facing slightly inwards, about 1.8 m (6 ft) above the floor.

Surround back speakers (SBR and SBL)

The surround back speakers supplement the surround speakers and provide for more realistic front-to-back transitions. Place these speakers directly behind the listening position and at the same height as the surround speakers. They should be positioned at least 30 cm (12 in) apart. Ideally, they should be positioned at the same width as the front speakers.

Subwoofer

The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity reproduction of the LFE (lowfrequency effect) channel included in Dolby Digital and DTS software. The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce wall reflections.

Presence speakers (PR and PL)

Presence speakers supplement the sound from the front speakers with extra ambient effects produced by CINEMA DSP (see page 46). These effects include sounds that filmmakers intend to locate a little farther back behind the screen in order to create more theater-like ambience. Place these speakers at the front of the room about 0.5 - 1 m

(1 - 3 ft) outside the front speakers, facing slightly inwards, and about 1.8 m (6 ft) above the floor.

Note

Surround back and presence speakers do not output sound simultaneously. You can set to prioritize either set of speakers in SOUND MENU (see page 60).

12

Di-pole speaker layout

Either di-pole or direct radiating speaker types can be used for THX surround. If you choose di-pole speakers, please place the surround and surround back speakers according to the speaker layout below.

FL

C

FR

SL

SR

30˚

30˚

SBL

SBR

: Di-pole speaker

: Direction of di-pole speaker

SPEAKER SETUP

Speaker connections

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

CAUTION

If you will use 6 ohm speakers, be sure to set this unit’s speaker impedance setting to 6 ohms before using (see page 25).

Before connecting the speakers, make sure that the power of this unit is off.

Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/or speakers.

Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away from the monitor.

A speaker cord is actually a pair of insulated cables running side by side. One cable is colored or shaped differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+” (red) terminals on this unit and your speaker. Connect the plain cable to the “–” (black) terminals.

10 mm (3/8 in)

1 2

1Remove approximately 10 mm (3/8 in) of insulation from each of the speaker cables.

2Twist the exposed wires of the cable together to prevent short circuits.

3Loosen the knob.

The supplied speaker terminal wrench is useful for loosening or tightening knobs.

4Insert one bare wire into the hole in the side of each terminal.

PREPARATION

13

SPEAKER SETUP

5 Tighten the knob to secure the wire.

Speaker terminal wrench

5

4

3

Red: positive (+)

Black: negative (–)

Connecting to PRESENCE/ZONE 2 or PRESENCE speaker terminals

13

2

1Open the tab.

2Insert one bare wire into the hole of each terminal.

3Return the tab to secure the wire.

Banana plug connections

First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.

Banana plug

y

You can also use banana plugs with the PRESENCE/ZONE 2 and PRESENCE speaker terminals. Open the tab, then insert one banana plug connector into the hole of each terminal. Do not attempt to close the tabs after connecting the banana plugs.

14

SPEAKER SETUP

 

 

9

 

 

 

 

 

10

 

2

 

 

 

 

 

 

4

1

 

Front speakers (A)

 

 

 

7

 

3

 

 

 

 

 

 

Right

Left

 

 

 

 

 

 

 

 

8

6

5

 

 

 

 

 

 

Subwoofer with

 

 

 

 

 

 

 

 

 

 

 

 

 

 

built-in amplifier

 

Center

Front

 

 

Speaker layout

 

 

speaker

speakers

 

 

 

 

 

(B)

 

 

 

 

1

2

3

4

RC-232C

SUB

WOOFER

PRE OUT

R

+

 

+

L

 

FRONT

+

 

+

CENTER

 

 

+

 

 

 

SURROUND

 

 

 

 

R

+

 

+

L

 

 

 

 

 

 

 

R

L

 

 

 

 

 

 

+

 

R

+

 

+

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SURROUND BACK

SINGLE

 

PRESENCE/ZONE 2

 

 

 

SPEAKERS

 

 

 

 

PREPARATION

7

 

 

 

8

5

 

 

 

6

9

 

 

 

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Right

 

Left

 

 

Right

 

Left

 

Right

Left

Surround speakers

Surround back speakers

Presence speakers

You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously.You can set to prioritize either set of speakers in SOUND MENU (see page 60).

The surround back speakers output the surround back channel included in Dolby Digital EX and DTS-ES software and only operate when the Dolby Digital EX, DTS-ES or Dolby Pro Logic IIx decoder is turned on.

The presence speakers output ambient effects created by the DSP sound fields. They do not output sound when other sound fields are selected.

15

SPEAKER SETUP

FRONT terminals

Connect one or two speaker systems to these terminals. If you use only one speaker system, connect it to either the FRONT A or B terminals.

Note

The Canada model cannot output to two separate speaker systems simultaneously.

Bi-wired connection

The unit also allows you to make bi-wired connections to one speaker system. Use two pairs of speaker cables for each speaker (one pair for the woofer and one pair for the tweeter/mid-range). To use the bi-wired connections, press SPEAKERS A and SPEAKERS B on the front panel so that both SP A and B light up in the front panel display.

Bi-wired connection

R +

A

+

L

FRONT +

B

+

 

 

 

 

 

 

This unit

CENTER terminals

Connect a center speaker to these terminals.

SURROUND terminals

Connect surround speakers to these terminals.

SUBWOOFER jack

Connect a subwoofer with a built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, to this jack.

SURROUND BACK terminals

Connect surround back speakers to these terminals. If you only connect one surround back speaker, connect it to the left (L) terminals.

PRESENCE terminals

Connect presence speakers to these terminals. y

You can specify the location of speakers connected to the SPEAKERS B terminals in the SP B menu of the SET MENU mode (See page 64).

You can select how the volume control operate with regard to the ZONE 2 OUTPUT and ZONE 3 OUT PUT in the ZONE 2 SET and ZONE 3 SET menus of the SET MENU mode (See page 64).

You can select how the ZONE 2 will be amplified in the ZONE 2 AMP menu of the SET MENU mode (See page 64).

16

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the mains power until all connections between components are complete.

Cable indications

For analog signals

left analog cables

L

right analog cables

R

For digital signals

 

optical cables

O

coaxial cables

C

For video signals

 

video cables

V

S-video cables

S

 

V

Analog jacks

You can input analog signals from audio components by connecting audio pin cables to the analog jacks on this unit. Connect red plugs to the right jacks and white plugs to the left jacks.

Digital jacks

This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack. All digital input jacks are compatible with 96-kHz sampling digital signals.

Note

This unit handles digital and analog signals independently. Thus audio signals input to the analog jacks are only output to the analog OUT (REC) jacks. Likewise audio signals input to the digital (OPTICAL or COAXIAL) jacks are only output to the DIGITAL OUTPUT jacks.

Dust protection cap

Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in place. This cap protects the jack from dust.

Video jacks

This unit has three types of video jacks. Connection depends on the availability of input jacks on your monitor. The signals input through the S VIDEO jacks on this unit are automatically converted for output through the VIDEO jacks. When V CONV. is set to “ON” (see

page 63), signals input through the VIDEO jacks can be output through the S VIDEO and COMPONENT VIDEO jacks. Likewise, signals input through the S VIDEO jacks can also be output through the COMPONENT VIDEO jacks.

COMPONENT VIDEO

VIDEO

S VIDEO

PR

PB

Y

 

VIDEO jack

For conventional composite video signals.

S VIDEO jack

For S-video signals, separated into luminance (Y) and color (C) video signals to achieve high-quality color reproduction.

COMPONENT VIDEO jacks

For component signals, separated into luminance (Y) and color difference (PB, PR) to provide the best quality in picture reproduction.

Signal flow inside this unit

 

Input

Output

(MONITOR OUT)

COMPONENT

VIDEO

S VIDEO

VIDEO

Only when V CONV. is set to ON (see page 63)

Note

When signals are input through both the S VIDEO and VIDEO jacks, signals input through the S VIDEO jack have priority.

PREPARATION

17

CONNECTIONS

Connecting video components

Connections for DVD playback

 

Coaxial out

 

 

Optical out

Video out

 

 

DVD player

 

Audio out

C

O

R L

DIGITAL OUTPUT

AUDIO

 

AUDIO

VIDEO

 

COMPONENT VIDEO

 

 

OPTICAL

R

L

R

L

VIDEO

S VIDEO

PR

PB

Y

 

MD/TAPE

 

 

 

 

 

 

DVD

 

 

 

 

IN

 

 

 

 

 

 

 

 

 

 

 

 

DVD

 

 

 

 

 

 

(PLAY)

 

 

 

 

 

 

 

 

CD-R

MD/TAPE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

 

 

 

 

 

 

 

(REC)

 

 

 

 

 

 

 

Video in

Video

CD

 

 

 

 

 

 

 

 

DIGITAL INPUT

 

 

 

 

 

 

 

 

 

 

 

IN

 

 

 

 

 

 

 

 

monitor

 

(PLAY)

 

 

 

 

 

 

 

 

DVD

CD-R

 

 

 

 

 

MONITOR OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

 

 

 

TUNER

 

 

 

(REC)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AM

 

 

 

CD

 

 

 

 

 

 

ANT

 

 

 

 

 

 

 

 

 

 

 

 

 

PHONO

 

 

 

 

 

 

GND

M

 

CBL/SAT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COAXIAL

MAIN/SURROUND BACK

 

 

 

 

 

FM ANT

 

 

 

 

 

 

 

 

 

 

SUR

 

CD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

75

 

 

 

 

 

 

 

 

 

 

UNBAL.

 

 

 

SURROUND

 

 

ZONE 2

 

 

 

 

SU

 

DVD

 

 

 

 

 

 

 

 

WO

 

 

 

 

 

 

 

 

 

 

 

DTV

 

 

 

 

 

 

 

 

 

 

 

SUB

CENTER

 

ZONE 3

 

 

 

 

 

 

 

WOOFER

 

MONITOR OUT

 

 

 

 

GND

MULCH CH INPUT

OUTPUT

 

 

 

 

 

 

18

CONNECTIONS

Connecting to the MULTI CH INPUT jacks

This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or preamplifier.

If you set MULTI CH INPUT 6ch/8ch to “8ch” (see page 62), you can use input jacks assigned as MULTI CH INPUT FRONT (page 62) together with the MULTI CH INPUT jacks to input 8 channels.

Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right outputs to the left and right input jacks for the front and surround channels.

 

For 6-channel input

 

 

For 8-channel input

 

 

 

 

FRONT(6CH)/SB(8CH)

 

 

FRONT(6CH)/SB(8CH)

 

 

 

 

 

 

 

 

 

 

 

AUDIO

 

AUDIO

 

 

 

 

 

 

R

L

R

L

 

SURROUND

 

 

 

SURROUND

IN

 

 

DVD

 

 

 

 

 

 

(PLAY)

 

 

 

 

 

 

 

 

MD/TAPE

 

 

 

 

 

 

 

 

 

 

 

 

DTV

 

SUB

 

 

 

SUB

IN

 

 

CBL

 

WOOFER

CENTER

 

 

WOOFER CENTER

(PLAY)

 

 

/SAT

 

MULTI CH INPUT

 

 

MULTI CH INPUT

CD-R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN

 

Subwoofer

 

 

Subwoofer

CD

 

 

VCR 1

R L

 

 

R L

R L

 

R L

 

 

 

 

out

 

 

 

out

 

 

 

 

 

 

Center

 

 

Center

Surround

 

 

IN

 

 

out

 

 

out

 

 

DVR/

 

 

 

 

 

 

out

 

 

VCR 2

 

Multi-format player/

 

 

Multi-format player/

 

 

 

 

Front

External decoder

Surround

Surround

External decoder

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

out

 

 

out

back out

 

Front out L

 

 

 

Notes

When you select MULTI CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you cannot select sound field programs.

This unit does not redirect signals input to the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that you connect at least a 5.1-channel speaker system before using this feature.

When headphones are used, only front L/R channels are output.

PREPARATION

19

Yamaha htr-5890 User Manual

CONNECTIONS

Connections for other video components

Optical out

Cable TV or

Video out

 

 

 

satellite tuner

 

 

Audio out

 

O

R L

 

DIGITAL OUTPUT

AUDIO

 

AUDIO

VIDEO

 

COMPONENT VIDEO

 

OPTICAL

R

L

R

L

VIDEO

S VIDEO

PR

PB

Y

MD/TAPE

 

 

 

 

 

 

 

 

 

 

IN

 

 

 

 

 

 

 

 

 

(PLAY)

 

 

 

 

 

 

 

 

CD-R

MD/TAPE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DTV

 

 

 

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(REC)

 

 

 

 

 

 

 

 

DIGITAL INPUT

 

 

 

 

 

 

 

 

 

CD

IN

 

 

 

CBL

 

 

 

 

 

 

 

 

 

 

 

 

 

(PLAY)

 

 

 

/SAT

 

 

 

 

CD-R

CD-R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

IN

 

 

TUNER

 

 

(REC)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD

 

 

 

 

VCR 1

 

 

AM

 

 

 

 

 

 

 

 

 

 

CD

 

 

 

OUT

 

 

ANT

 

 

 

 

 

 

 

 

 

 

PHONO

 

 

 

 

 

 

GND

MA

CBL/SAT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN

 

 

 

 

 

MAIN/SURROUND BACK

 

 

DVR/

 

 

FM ANT

 

COAXIAL

 

 

VCR 2

 

 

 

 

 

 

 

 

 

 

SURR

CD

 

 

 

 

OUT

 

 

 

 

 

 

 

 

 

75

 

 

 

 

 

 

 

 

 

UNBAL.

 

 

SURROUND

 

 

ZONE 2

CD-R

 

 

 

SUB

DVD

 

 

 

 

 

 

 

 

WOOF

 

 

 

 

 

 

 

 

 

DVR/

 

 

 

 

 

 

 

 

 

VCR2

 

 

 

 

 

 

 

 

 

 

SUB

CENTER

 

ZONE 3

 

 

 

 

 

 

WOOFER

 

 

 

 

 

 

GND

MULCH CH INPUT

OUTPUT

 

 

 

 

 

C R L R L

Audio in DVD recorder Video in or VCR

Audio out Video out

Coaxial out

VIDEO AUX jacks (on the front panel)

Use these jacks to connect any video source, such as

S VIDEO

VIDEO

L

AUDIO R

OPTICAL

a game console or camcorder, to this unit.

 

 

 

 

 

 

 

 

VIDEO AUX

 

 

S

V

L

R

O

Optical out

Audio out R

Audio out L

Video out

S-video out

Connect a YAMAHA CD recorder that outputs OSD signals.

Game console or video camera

20

Connecting audio components

Connections for audio components

Optical in

MD recorder or tape deck

 

Audio out

 

Audio in

 

O

R L

R

L

 

 

 

 

 

DIGITAL OUTPUT

AUDIO

AUDIO

 

OPTICAL

R

L

R

 

MD/TAPE

 

 

 

 

 

IN

 

 

 

 

(PLAY)

 

 

 

CD-R

MD/TAPE

 

 

 

 

 

 

 

 

OUT

 

 

Optical out

 

(REC)

 

 

CD

 

 

 

 

DIGITAL INPUT

 

 

 

O

 

IN

 

 

 

(PLAY)

 

 

 

 

CD-R

 

 

 

 

OUT

 

 

 

 

(REC)

 

 

Audio out

DVD

 

 

 

L

 

CD

 

 

 

 

 

 

CD player

CBL/SAT

PHONO

 

 

R

 

 

 

 

 

COAXIAL

MAIN/SURROUND BACK

 

 

 

 

 

C

CD

 

 

 

Coaxial out

 

SURROUND

 

ZONE 2

 

 

 

 

 

 

 

 

DVD

 

 

 

 

DTV

 

 

 

 

 

SUB

CENTER

ZONE 3

 

 

WOOFER

 

GND

MULCH CH INPUT

OUTPUT

CONNECTIONS

PREPARATION

Optical in

O

Audio out

L

R

CD recorder*

L

R

Audio in

*Some CD recorders can be connected to the VIDEO CD-R jacks (see page 20).

Audio out

L

R

GND

Turntable

Connecting a turntable

PHONO jacks are for connecting a turntable with an MM or high-output MC cartridge. If you have a turntable with a low-output MC cartridge, use an in-line boosting transformer or MC-head amplifier when connecting to these jacks.

y

Connect your turntable to the GND terminal to reduce noise in the signal. However, you may hear less noise without the connection to the GND terminal for some record players.

21

CONNECTIONS

Connecting to an external amplifier

If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the PRE OUT jacks as follows.

Notes

When audio pin plugs are connected to the PRE OUT jacks for output to an external amplifier, it is not necessary to use the corresponding SPEAKERS terminals. Set the volume of the external amplifier connected to this unit to the maximum.

The signal output through the FRONT PRE OUT and CENTER PRE OUT jacks are affected by the TONE CONTROL settings.

If SPEAKERS A is turned off and SP B is set to ZONE B (see page 64), signals will only be output from the FRONT PRE OUT jacks.

1

R

L

 

FRONT

 

2

R

L

 

 

 

SURROUND

3

SUB

5

 

WOOFER

CENTER

4

R

L

 

 

 

 

SURROUND BACK

 

 

/PRESENCE

 

 

PRE OUT

1 FRONT PRE OUT jacks

Front channel line output jacks.

2 SURROUND PRE OUT jacks

Surround channel line output jacks.

3 SUBWOOFER PRE OUT jack

Connect a subwoofer with built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, to this jack.

4SURROUND BACK/PRESENCE PRE OUT jacks

Surround back or presence channel line output jacks.

5 CENTER PRE OUT jack

Center channel line output jack.

Notes

Each PRE OUT jack outputs the same channel signal as the corresponding speaker terminals. However, when both surround back and presence speakers are setup in this unit, the signals output from SURROUND BACK/PRESENCE PRE OUT jacks may not correspond to the correct speakers.

Adjust the volume level of the subwoofer with the control on the subwoofer. It is also possible to adjust the volume level by using the remote control (see “Manually adjusting speaker levels” on page 51).

Some signals may not be output from the SUBWOOFER PRE OUT jack depending on the SPEAKER SET (see page 55) and LFE/BASS OUT (see page 56) settings.

22

Connecting the antennas

Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals.

AM loop antenna

Indoor FM antenna

(included)

(included)

COMPONENT VIDEO

PR PB Y

VD

TV

NITOR OUT

TUNER

AM

ANT

GND

MAI

FM ANT 75

UNBAL.

SURRO

SUB

WOOF

CONNECTIONS

Notes

The AM loop antenna should be placed away from this unit.

The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

A property installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas.

Ground (GND terminal)

For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

Connecting the AM loop antenna

1Set up the AM loop antenna, then connect it to the terminals on this unit.

2Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals.

3Orient the AM loop antenna for the best reception.

PREPARATION

23

CONNECTIONS

Connecting the power supply cord

AC OUTLETS

Connecting the AC power cord

Plug the power cord into the AC inlet after all other connections are complete, then plug the power cord to an AC wall outlet.

CAUTION

Do not use other AC power cords. Use the one provided. Use of other power cords may result in fire hazard or electrical shock.

AC OUTLET(S) (SWITCHED)

Use outlets to connect the power cords from your other components to this unit. Power to the AC OUTLET is controlled by this unit’s STANDBY/ON (or SYSTEM POWER and STANDBY). These outlets will supply power to any connected component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the AC OUTLET is 100 W.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However if the power cord is disconnected from the AC wall outlet, or the power supply is cut for more than one week, the stored data will be lost.

24

Speaker impedance setting

CAUTION

If you are using 6 ohm speakers, set the impedance to 6 ohms as follows before turning on the power.

Be sure this unit is in the standby mode.

1On the front panel, while holding down SPEAKERS A, press STANDBY/ON.

“SP IMP.SET” appears in the front panel display for a few seconds, then “Minimum 8ohms” appears.

SPEAKERS

A

STANDBY /ON

SP IMP.SET

Minimum 8ohms

2Press SPEAKERS A or SPEAKERS B to select the impedance of your speakers.

You can select either 6 ohms or 8 ohms.

3Press STANDBY/ON to exit the setting.

This unit will be set to the standby mode.

y

You can also use SP IMP.SET (see page 63) to set the speaker impedance.

CONNECTIONS

Turning on the power

When all connections are complete, turn on the power of this unit.

1

 

 

 

 

 

 

 

VOLUME

 

PURE DIRECT

 

 

 

 

 

 

STANDBY

 

 

 

 

 

 

 

/ON

 

 

 

 

 

 

 

 

 

PRESET/TUNING

FM/AM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

OPTIMIZER

 

EDIT

 

 

 

MAN'L/AUTO FM

AUTO/MAN'L MONO

MIC

 

 

 

 

 

 

 

PROGRAM

 

 

INPUT

 

PHONES

SPEAKERS

 

 

 

 

 

VIDEO AUX

A

B

STRAIGHT

 

TONE CONTROL

INPUT MODE

 

MULTI CH

 

 

 

 

 

 

 

INPUT

 

 

EFFECT

 

 

 

 

 

SILENT CINEMA

 

 

 

 

 

 

 

 

 

 

SYSTEM

1

POWER

POWER

STANDBY

POWER

TV

AV

 

 

A

B

INPUT MODE

SLEEP

PHONO

TUNER

CD

MULTI CH IN

 

V-AUX

CBL/SAT

MD/TAPE

CD-R

 

DTV

VCR 1

DVR/VCR2

DVD

 

SELECT

AMP

+ + +

1Press STANDBY/ON (SYSTEM POWER on the remote control) to turn on the power of this unit.

 

SYSTEM

 

POWER

STANDBY

or

/ON

Front panel

Remote control

2Turn on the video monitor connected to this unit.

Note

Press STANDBY/ON again (STANDBY on the remote control) to enter the standby mode.

PREPARATION

25

AUTO SETUP

Introduction

This receiver employs YAMAHA Parametric Room Acoustic Optimizer (YPAO) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments. The supplied optimizer microphone collects and analyzes the sound your speakers produce in your actual listening environment.

y

The basic setup feature (page 31) is useful if you want to set up your system quickly and with minimal effort. However, we recommend that you come back and perform auto setup later to take advantage of YPAO and enjoy even higher fidelity.

Notes

Please be advised that it is normal for loud test tones to be output during the auto setup procedure.

If auto setup stops and error messages appear on the screen, follow the troubleshooting on page 29.

YPAO performs the following checks and makes appropriate adjustments to give you the best possible sound from your system.

WIRING

Checks which speakers are connected and the polarity of each speaker.

DISTANCE

Checks the distance of each speaker from the listening position and adjusts the timing of each channel.

SIZE

Checks the speaker’s frequency response and sets the appropriate low frequency crossover for each channel.

EQUALIZING

Adjusts frequency and levels of each channel’s parametric equalizer to reduce coloration across the channels and create a cohesive sound field. This is particularly important if you use different brands or sizes of speakers for some channels or have a room with unique sonic characteristics.

YPAO equalizing calibration incorporates three parameters (frequency, level and Q factor) for each of the seven bands in its parametric equalizer to provide highly precise automatic adjustment of frequency characteristics.

LEVEL

Checks and adjusts the sound level (volume) of each speaker.

Optimizer microphone setup

1Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel.

 

PRESET/TUNING

FM/AM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

OPTIMIZER

EDIT

 

 

 

MAN'L/AUTO FM

AUTO/MAN'L MONO

MIC

 

 

 

 

 

 

PROGRAM

 

INPUT

PHONES

SPEAKERS

 

 

 

 

A

B

STRAIGHT

TONE CONTROL

INPUT MODE

MULTI CH

 

 

 

 

 

INPUT

 

 

EFFECT

 

 

 

SILENT CINEMA

Notes

After you have completed the auto setup procedure, be sure to disconnect the optimizer microphone.

The optimizer microphone is sensitive to heat.

–Keep it away from direct sunlight. –Do not place it on top of this unit.

2Place the optimizer microphone on a flat level surface with the omni-directional microphone head upward, at your normal listening position.

If possible, use a tripod (etc.) to affix the optimizer mic at the same height as your ears would be when you are seated in your listening position.

Optimizer microphone position

26

Loading...
+ 74 hidden pages