Yamaha BBT410S, BBT210S, BBT110S User Manual

SPEAKER SYSTEM

BBT410S

BBT210S

BBT110S

BBT410S

Owner’s Manual

Mode d’emploi

Bedienungsanleitung

Manual del Usuario

BBT210S

BBT110S

Manuale di Istruzioni

Handleiding

					→
					→
	●
	●
	●
	●
	●
	INPUT
	●
	●
	●
	●
	●
	/

2

BBT410S/210S/110S

■

MODEL	BBT410S	BBT210S	BBT110S
	25 cm ×4	25 cm ×2	25 cm ×1
	×1	×1	×1
INPUT
	250 Wrms	250 Wrms	250 Wrms
	4 Ω	4 Ω	4 Ω
W×H×D	596 x 640 x 483 mm	596 x 403 x 363 mm	430 x 372 x 363 mm
	29 kg	21 kg	14.5 kg
	×4
		*

3

■

	250W 4Ω	*
		2
	/ /
		=1 +2 +3 +....
	2
		4Ω 3
	* /
		12Ω

■

/“0”

ベルが高いので、ギター用シールドケーブルなどを使った 場合、発熱や断線の恐れがあります。

ンプ/ BBT 500H

SPEAKER 1, 2

■

4 kHzTWEETER LEVEL

1

=

1 1 1

+ + + ........

1 2 3

4Ω 31.3Ω

4

4

4

/

4

1.	3.
2.	4.

Tel [phone]:30 19:00

*

064-8543		10 1 1-50	TEL [phone]
	984-0015	5-7 3F	TEL [phone]
	143-0006	2 1 1 14 A-5F TEL [phone]
	435-0016	200 ( ) 6 2	TEL [phone]
	454-0058	2-1-2 ( ) 3F	TEL [phone]
	565-0803	1-16 ( )	TEL [phone]
	760-0029	8-7 ( )	TEL [phone]
	812-8508	2-11-4	TEL [phone]
[ ] CS	430-8650	( )2 2F	TEL [phone]

E M
E M	064-8543	10 1 1-50	TEL [phone]
E M	980-0804	2-2-10	TEL [phone]
E M	108-8568	2-17-11	TEL [phone]
E M	460-8588	1-18-28	TEL [phone]
E M	542-0081	3-12-9	TEL [phone]
E M	812-8508	2-11-4	TEL [phone]
	108-8568	2-17-11	TEL [phone]

430-8650 10 1

5

Thank you for purchasing the Yamaha BBT410S/210S/110S Speaker System.

In order to get the most in performance and life out of this product, we recommend that you thoroughly read this Owner’s Manual before using it. After reading the manual, please keep it in a safe place for future reference.

Precautions

●Avoid using your amplifier and speaker in the following locations to prevent possible damage:

•In direct sunlight or next to heating equipment.

•Extremely cold or hot locations.

•Locations exposed to high humidity or excessive dust.

•Locations subject to strong shocks or vibration.

●If one of the following occurs, disconnect the cable from the INPUT jack as soon as possible then contact the dealer from whom you purchased the device for repair.

•The speaker cable or plug has become damaged.

•Sound is not produced or an abnormal smell or smoke is present.

•A foreign substance gets into the device or liquid is spilled onto the device.

•The device is wet or damp (rain, etc.).

•An abnormality or damage is found on the device.

●Before connecting the device to a power amplifier or other devices, make sure that the power on all devices is switched OFF. Not doing so can damage the speaker, etc.

●When connecting the device to a power amplifier, etc., use the supplied speaker cable or a commercially available speaker cable (with a standard monaural phone plug). Use of a normal shielded guitar cable, etc. can result in cable overheating or damage.

●Disconnect cables before moving the system. To prevent short circuits or breakage of cables, always disconnect cables prior to moving system equipment.

●Your Yamaha amplifier is a precision musical instrument. Handle it with care and avoid dropping or bumping it.

●Do not apply excessive force to the switches and controls.

●To prevent damage and possibly electrical shock, never open the case and tamper with the internal circuitry.

●Never place the device on an unstable surface, table, or sloped surface. Also, never stack the device excessively. Doing so may cause the device to fall or overturn, causing injury.

*If the device is to be stacked, we recommend that the casters be removed from the amplifier/speaker to prevent overturning.

●Never use benzene, thinner or other volatile liquids for cleaning, as these chemicals may cause damage or discoloration to the finish. Always use a dry, soft cloth to wipe off dust and dirt.

To protect your speakers

When choosing a power amplifier to use with your speakers, make sure that its power output matches the speakers’ power capacity (refer to the Specifications below). Even if the amplifier’s power output is lower than the speakers’ power capacity, the speakers may be damaged when clipping of a high input signal occurs.

The following may cause damage to speakers:

•Feedback caused when using a microphone.

•Continuous high sound pressure level produced by electronic instruments.

•Continuous high-power output distorted signals.

•Popping noises caused by turning on equipment, or by connecting or disconnecting system-components while the amplifier is turned on.

Specifications

Model	BBT410S	BBT210S	BBT110S
Speaker	25cm Woofer x4	25cm Woofer x2	25cm Woofer x1
	Tweeter x1	Tweeter x1	Tweeter x1
INPUT Jack	Standard Monaural Phone Jack	Standard Monaural Phone Jack	Standard Monaural Phone Jack
Power Handling	250 Wrms	250 Wrms	250 Wrms
Impedance	4Ω	4Ω	4Ω
Dimensions (WxHxD)	596 x 640 x 483 mm	596 x 403 x 363 mm	430 x 372 x 363 mm
	(23-7/16” x 25-3/16” x 19”)	(23-7/16” x 15-7/8” x 14-5/16”)	(16-15/16” x 14-5/8” x 14-5/16”)
Weight	29 kg (63 lbs. 15 oz)	21 kg (46 lbs. 5 oz)	14.5 kg (31 lbs. 15 oz)
Accessories	Speaker Cable	Speaker Cable	Speaker Cable
	Casters x4	Owner’s Manual (this booklet)	Owner’s Manual (this booklet)
	Owner’s Manual (this booklet)
		* Design and specifications may change without notice due to improvements.

6