Xerox 9050, 9200, 9040, 9060, 9100 User Manual

...
0 (0)

9000 Overhead Projector

Illustrated Parts Breakdown

3M Visual Systems Division

OHP Service Documentation Resource

6801 River Place Boulevard

Copyright © 2001, 3M IPC. All Rights Reserved

Austin, Texas 78726-9000

78-6970-7536-0

Revision History

Original Issue date: 1994

The release date, revision level, pages changed and a description of the modifications are listed below.

Revision

Date

Page(s) Changed

Description

Rev A

1994

All pages

First edition released

Rev K

8/2002

Section 14,

New Roll Film Kit

 

 

Page 41

 

 

 

 

 

NOTE 1: Blue text indicates a link to that page.

All rights reserved. No part of this book covered by the copyrights hereon may be reproduced or copied in any form or by any means-graphic, electronic, or mechanical, including photocopying, taping or information storage and retrieval systems-without written permission of 3M Visual Systems Division.

i

3MOverhead Projector 9000 Series

Illustrated Parts Breakdown

This Illustrated Parts Breakdown (IPB) Manual contains the information necessary to locate and identify assemblies, sub-assemblies, and specific parts of the 9000 Series Overhead Projector.

Part Numbers

All components available on a replacement basis are listed with their 3M identification number. The parts identification list opposite each illustration provides the description adequate to identify components. If the component is available only as part of the next higher assembly, the description column provides the next higher assembly description or identification number.

Locating and Identifying a Part

If physical appearance and general location of an item are known:

1.Use the IPB Section Titles to help determine which assembly or sub-assembly includes the item.

2.Refer to the view for the assembly or sub-assembly and locate the item on the exploded view. Match the part callout number to the corresponding number in the parts list.

3.Parts shown inside a dashed box can only be ordered as an assembly. Any part or mounting hardware shown outside the box is not included with the assembly.

Machine Identification Plate

The serial number plate for the 9000 is located on the bottom side of the projector. The Machine Identification Plate is divided into the following components:

1.Product Name: The specific version number of the projector.

2.Model Number/Alpha Code: The series number of the projector followed by a three or four character alpha code identifier. The Alpha Code indicates the design level, specific product characteristics, power cord or distribution specific to a country.

3.Lamp: The electrical rating of the lamp.

4.MFG Code: The MFG Code indicates the year and quarter the projector was built. (See the example to the right):

5.S/N: The serial number assigned to this projector.

Ordering Parts

When ordering parts, include the following information:

1.Machine model number and serial number.

2.Parts identification number.

3.Part description.

4.Quantity required.

MFG Code

 

Letter

 

Digit

E

1997

1

Jan-Mar

 

 

 

 

F

1998

2

Apr-Jun

 

 

 

 

H

1999

3

Jul-Sep

 

 

 

 

J-

2000

4

Oct-Dec

 

 

 

 

K

2001

1

Jan-Mar

 

 

 

 

For U.S. retail customers: Call 1-800-650-8429, or fax 1-800-650-9268. Dealers: Refer to Dealers Guide. 3M Subsidiaries: Contact Export Operations.

© 3M IPC 2001

3MOverhead Projector 9000 Series

Illustrated Parts Breakdown

 

Table of Contents

 

 

 

QUICK REFERENCE PARTS INDEX ..................................................................................

 

1

0

OVERVIEW..........................................................................................................................

 

3

1

WIDE ANGLE (OPEN) 293MM HEAD ASSEMBLY..............................................................

 

4

2

ARTICULATE (CLOSED) HEAD ASSEMBLY .....................................

................................

6

3

TRIPLET AND VARIFOCAL (OPEN) HEAD ASSEMBLIES .................................................

8

4

ARM AND FOCUS ASSEMBLY ...........................................................................................

 

10

5

TOP COVER........................................................................................................................

 

12

6

BASE ENCLOSURE ............................................................................................................

 

15

7

COOLING FAN ....................................................................................................................

 

20

8

LAMP HOUSING - ENX SINGLE LAMP...............................................................................

 

23

9

LAMP HOUSING - ENX/FXL DUAL LAMP...........................................................................

 

25

10A

LAMP HOUSING - EVD DUAL LAMP - 9550 (MFG CODE A3 AND EARLIER) ...................

27

10B

LAMP HOUSING - EVD DUAL LAMP - 9550 (MFG CODE A3 AND LATER).......................

29

11

LAMP HOUSING - FNT SINGLE LAMP ...............................................................................

 

32

12A

LAMP HOUSING - FNT DUAL LAMP (MFG CODE A3 AND EARLIER) ..............................

34

12B

LAMP HOUSING - FNT DUAL LAMP (MFG CODE A3 AND LATER) ..................................

36

13

LAMPCHANGER AND HI/LO LAMP CONTROL MODULE (DUAL LAMP VERSIONS) .......

38

14

ROLL FILM KIT...................................................................................................................

 

41

15

WIRE JUMPERS..................................................................................................................

 

42

16

SMALL ELECTRICAL PARTS KIT (EUROPE ONLY) .........................................................

 

47

17

SMALL MECHANICAL PARTS KIT (EUROPE ONLY) ........................................................

 

48

18

SMALL PLASTIC PARTS KIT (EUROPE ONLY) ................................................................

 

49

19

KIT FASTENERS 9000 SERIES (EUROPE ONLY) ............................................................

 

51

APPENDIX A SPECIFICATIONS.....................................................................................................

 

A-1

IMPORTANT NOTICE

3M reserves the right to sell or furnish NEW OR RECONDITIONED PARTS. New and reconditioned parts are covered by the same 3M new parts limited warranty.

© 3M IPC 2001

3M™ Overhead Projector 9000 Series

 

Illustrated Parts Breakdown

 

Quick Reference Parts Index

 

 

 

 

 

 

 

 

 

 

 

 

Description

 

Part

 

Figure

Item

 

 

 

Number

 

No.

No.

 

BLADE, Fan

78-8054-1823-9

7

5

 

 

 

 

 

 

 

 

CRADLE, Post (Folding Post)

78-8079-8890-8

6

24

 

 

 

 

 

 

 

 

DIODE KIT, Inline

78-8054-1836-1

7

16

 

 

 

 

 

 

 

 

FAN MOTOR ASSEMBLY (International)

78-8054-1855-1

7

28

 

 

 

 

 

 

 

 

FAN MOTOR ASSEMBLY (U.S.)

78-8114-9015-6

7

29

 

 

 

 

 

 

 

 

FOOT

26-1008-5211-5

6

41

 

 

 

 

 

 

 

FRESNEL LENS, Single Element, Glare Free, 182.9 mm

78-8064-1645-5

5

8A

 

(9050, 9060, 9070, 9080, 9100 AABD, AJB, AJBW, AJBX,

 

 

 

 

 

 

 

9200 AACD, AKC, AMD)

 

 

 

 

 

 

 

 

 

 

 

 

FRESNEL LENS, Dual Element, Clear, 182.5mm

78-8079-9176-1

5

8B

 

(9075 AJG only)

 

 

 

 

 

 

 

FRESNEL LENS, Dual Element, Glare Free, 182.5 mm

78-8054-1236-4

5

8C

 

(9100 except AABD, AJB, AJBW and AJBX, 9200 except

 

 

 

 

 

 

 

AACD and AJC)

 

 

 

 

 

 

 

FRESNEL LENS, Dual Element, Clear, 174mm |

78-8079-9045-8

5

8D

 

(9550 except ABAJ)

 

 

 

 

 

 

 

FRESNEL LENS, Dual Element, Europe, Glare Free,

78-8095-8353-3

5

8E

 

174mm (9550 ABHJ)

 

 

 

 

 

 

 

GLASS, Exit, Articulate (293 mm Singlet Head)

-

-

-

2

4A

 

 

 

 

 

 

GLASS, Coated, Articulate (9075 AJG)

78-8073-2982-2

2

4B

 

 

 

 

 

 

GLASS, Stage (9050, 9060, 9070, 9075, 9080, 9100, 9200,

78-8064-1473-2

5

6A

 

and 9550 Europe)

 

 

 

 

 

 

 

GLASS, Stage (9550)

78-8079-8975-7

5

6B

 

 

 

 

 

 

 

KNOB, Focus

78-8064-1601-8

4

16

 

 

 

 

 

 

 

LAMP, Projection, ENX, 82V, 360W

78-8011-1186-1

8

9A

 

 

 

 

 

 

LAMP, FXL (9200)

78-8073-7100-6

9

13B

 

 

 

 

 

 

 

LATCH, Top Cover

78-8079-8768-6

5

12

 

 

 

 

 

 

 

 

 

 

LENS, Triplet, (342 mm) (9200)

-

-

-

3

3

 

 

 

 

 

 

 

 

LENS, Varifocal, (270-325 mm)

78-8073-3296-6

3

4

 

 

 

 

 

 

 

LENS, Meniscus (355 mm)

78-8011-1440-2

2

14B

 

 

 

 

 

 

 

LENS, Exit, Articulate (355 mm Doublet Head)

78-8014-8812-9

2

5

 

 

 

 

 

 

 

 

LENS, Condenser (60mm)

78-8079-9025-0

10A

12

 

 

 

 

 

 

 

 

 

© 3M IPC 2001

1

3M™ Overhead Projector 9000 Series

 

Illustrated Parts Breakdown

 

Quick Reference Parts Index

 

 

 

 

 

 

 

 

 

 

 

 

Description

 

Part

 

Figure

Item

 

 

 

Number

 

No.

No.

 

MIRROR ASSEMBLY (Open Singlet)

78-8057-4230-7

1

3

 

 

 

 

 

 

 

 

MIRROR ASSEMBLY (Doublet)

78-8064-1457-5

2

17

 

 

 

 

 

 

 

MIRROR ASSEMBLY, Triplet (9550 - Dark Grey, 4mm)

78-8079-9227-2

3

12A

 

 

 

 

 

 

MIRROR ASSEMBLY, Triplet (9200 - Black, 3mm)

78-8079-9156-3

3

12B

 

 

 

 

 

 

MOTOR, Fan (230 Volt)

78-8079-8936-9

7

15A

 

 

 

 

 

 

MOTOR, Fan (100 Volt)

78-8079-8937-7

7

15B

 

 

 

 

 

 

 

RESISTOR, 1.2 Ohm (9050, 9060, 9070)

78-8073-7127-9

8

14

 

 

 

 

 

 

 

 

SOCKET, Single lamp (ENX)

78-8079-8820-5

8

8

 

 

 

 

 

 

 

 

 

 

SWITCH, Micro

-

-

-

7

7

 

 

 

 

 

 

 

 

SWITCH, Lampchanger/Hi/Lo, Dimmer

78-8079-8855-1

13

8

 

 

 

 

 

 

 

 

THERMOSTAT, Safety (ENX)

78-8079-8872-6

8

5

 

 

 

 

 

 

 

 

THERMOSTAT (9080/ENX, 9100/ENX, 9200/ENX, 9550)

78-8079-8933-6

13

2

 

 

 

 

 

 

 

 

 

TRANSFORMER, EVD, Japan (9550) (100V)

-

-

-

6

16A

 

 

 

 

 

 

TRANSFORMER, Auto, EVD (120V)

78-8079-9079-7

6

16B

 

 

 

 

 

 

TRANSFORMER, EVD (220V)

78-8079-8991-4

6

16C

 

 

 

 

 

 

TRANSFORMER, FNT (100V)

78-8079-8921-1

6

16D

 

 

 

 

 

 

TRANSFORMER, FNT, Taiwan (120V)

78-8079-9070-6

6

16E

 

 

 

 

 

 

 

 

TRANSFORMER, FNT, Indonesia (127/220V)

-

-

-

6

16F

 

 

 

 

 

 

TRANSFORMER, Auto, Hong Kong, Thailand (220/230V)

78-8073-3009-3

6

16G

 

 

 

 

 

 

TRANSFORMER, Auto (230/240V)

78-8073-3010-1

6

16H

 

 

 

 

 

 

TRANSFORMER, Auto, Australia, India, New Zealand,

78-8073-3011-9

6

16I

 

South Africa (240/250V)

 

 

 

 

 

 

 

TRANSFORMER, Brazil (127/220V) (9080 ABDB)

-

-

-

6

16J

 

 

 

 

 

 

LAMP, EVD

78-8079-8791-8

9

13B

 

LAMP, FNT

78-8054-1175-4

9

13B

© 3M IPC 2001

2

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 0. Machine Overview

SMALL ELECTRICAL PARTS KIT

(EUROPE ONLY)

(See Section 16)

SMALL MECHANICAL PARTS KIT

(EUROPE ONLY)

(See Section 17)

SMALL PLASTIC PARTS KIT

(EUROPE ONLY)

(See Section 18)

KIT FASTENERS 9000 SERIES

(EUROPE ONLY)

(See Section 19)

© 3M IPC 2001

3

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 1.

Wide Angle (Open) 293mm Head Assembly

© 3M IPC 2001

4

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 1.

 

 

 

 

 

Wide Angle (Open) 293mm Head Assembly Parts List

 

 

 

 

 

 

 

 

Item

3M

Description

Qty.

 

No.

Part Number

 

 

 

 

0

78-8079-9151-4

HEAD ASSEMBLY, Wide Angle (Open), 293mm Singlet

3

 

 

1A

78-8014-8951-5

LENS, Wide Angle (293mm)

 

1

 

 

1B

78-8073-2980-6

LENS, Wide Angle (Used on 9075 United States, 9085 United

1

 

 

 

 

States plus AAWB, ABWB)

 

 

 

 

 

 

 

 

 

2

78-8064-1646-3

TUBING, Lens

 

3

 

3

78-8057-4230-7

MIRROR ASSEMBLY (Open Singlet)

1

 

4

78-8064-1605-9

SPRING, Mirror Damping (Used on 9050 and 9080, except

1

 

 

 

 

9080 AJD)

 

 

 

 

 

 

 

 

 

5

(See Note 1)

NUT, U-Type, 8-32

 

1

 

6

78-8079-8802-3

COVER, Head, Singlet

 

1

 

7

(See Note 1)

SCREW, Taptite, M3.5 X 8

 

1

 

8

(See Note 1)

SCREW, Type BT, 8-18 X 7/16

 

1

 

9

(See Note 1)

WASHER, Plain Nylon

 

1

 

10

78-8079-8803-1

BRACKET, Lens, Singlet

 

1

 

11

JV-0890-0185-1

LABEL, Caution, Japan (9050 ABAJ, 9080 ABDJ, 9200 ABCJ)

1

 

Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.

© 3M IPC 2001

5

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 2.

Articulate (Closed) Head Assembly

© 3M IPC 2001

6

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 2.

 

 

 

 

 

Articulate (Closed) Head Assembly Parts List

 

 

 

 

 

 

 

 

Item

3M

Description

Qty.

 

No.

Part Number

 

 

 

 

 

0A

78-8079-9152-2

HEAD ASSEMBLY, Articulate (Closed), 293mm Singlet, Wide

1

 

 

 

 

Angle

 

 

 

 

 

 

 

 

 

 

0B

78-8079-9153-0

HEAD ASSEMBLY, Articulate (Closed), 355mm Doublet

1

 

 

0C

78-8073-3115-8

HEAD ASSEMBLY, Articulate (Closed), Coated, 293mm

1

 

 

 

 

Singlet, Wide Angle (9075 AJG)

 

 

 

 

 

 

 

 

 

 

 

1A

78-8064-1602-6

CLAMP, Dust Shield and Lens

 

1

 

 

1B

78-8054-1791-8

CLAMP, Dust Shield and Lens (Singlet) (Used on United

1

 

 

 

 

States versions of: 9070, 9075, 9080 plus AADD, 9085)

 

 

 

 

 

 

 

 

2

78-8064-1797-4

SHIELD, Dust (Short)

 

1

 

3

78-8064-1562-2

HOUSING, Exit Lens

 

1

 

 

4A

78-8064-1650-5

GLASS, Exit, Articulate (293mm Singlet Head)

1

 

 

4B

78-8073-2982-2

GLASS, Coated, Articulate (9075 AJG)

1

 

5

78-8014-8812-9

LENS, Exit, Articulate (355mm Doublet Head)

1

 

 

6A

78-8079-8805-6

COVER, Head, Doublet

 

1

 

 

6B

78-8079-9229-8

COVER, Head, Doublet, Xerox

 

1

 

7

(See Note 1)

SCREW, Taptite, M3.5 X 8

 

1

 

8

(See Note 1)

SCREW, Taptite, M3 X 6

 

1

 

9

78-8014-8817-8

SPRING, Tension

 

3

 

10

78-8064-1643-0

MOUNT, Lens (293mm Singlet Wide Angle)

1

 

11

78-8079-8804-9

BRACKET, Lens, Doublet

 

1

 

12

78-8011-1445-1

PIVOT

 

1

 

13

78-8064-1646-3

TUBING, Lens

 

2

 

 

14A

78-8014-8951-5

LENS, Wide Angle (293mm)

 

1

 

 

14B

78-8011-1440-2

LENS, Meniscus (355mm)

 

1

 

 

14C

78-8073-2980-6

LENS, Wide Angle (9075 AJG)

 

1

 

 

15A

78-8064-1596-0

CLAMP, Lens (293mm Singlet Head)

1

 

 

15B

78-8064-1595-2

CLAMP, Lens (355mm Doublet Head)

1

 

16

(See Note 1)

SCREW, Plastite, 4-20 X 1/4

 

2

 

17

78-8064-1457-5

MIRROR ASSEMBLY (Doublet)

 

1

 

18

JV-0890-0185-1

LABEL, Caution, Japan (9050 ABAJ, 9080 ABDJ, 9200 ABCJ)

1

 

Note1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.

© 3M IPC 2001

7

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 3.

Triplet and Varifocal Head Assemblies

© 3M IPC 2001

8

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 3.

 

 

 

 

 

Triplet and Varifocal Head Assemblies Parts List

 

 

 

 

 

 

 

 

Item

3M

Description

Qty.

 

No.

Part Number

 

 

 

 

 

0A

78-8079-9154-8

HEAD ASSEMBLY, Triplet (Open) (9200)

1

 

 

0B

78-8079-9155-5

HEAD ASSEMBLY, Varifocal (Open) (9550)

1

 

 

0C

TBD

HEAD ASSEMBLY, Triplet (317mm) (9400)

1

 

1

(See Note 1)

NUT, U-Type, 8-32

 

2

 

2

(See Note 1)

SCREW, Taptite, M3 X 6mm, Black, Zinc

3

 

 

3A

78-8097-3693-3

LENS, Triplet, High Resolution (342mm) (9200, 9400 AHRG)

1

 

 

3B

78-8014-8916-8

LENS, Triplet (317mm) (9400)

 

1

 

4

78-8073-3296-6

LENS, Varifocal (270-325mm)

 

1

 

5

78-8079-9014-4

ADAPTER, Lens (9550)

 

1

 

6

(See Note 1)

SCREW, Taptite, M3.5 X 8

 

2

 

7

(See Note 1)

SCREW, Plastite, 4-20 X 1/4 BZN

3

 

 

8A

78-8079-9015-1

COVER, Head (9200, 9400)

 

1

 

 

8B

78-8079-9017-7

COVER, Head (9550)

 

1

 

9

(See Note 1)

SCREW, Type BT, 8-18 X 7/16

 

2

 

10

(See Note 1)

WASHER, Plain, Nylon

 

2

 

11

78-8079-9012-8

BRACKET, Lens (9550)

 

1

 

 

12A

78-8079-9227-2

MIRROR ASSEMBLY, Triplet (9550 - Dark Grey, 4mm)

1

 

 

12B

78-8079-9156-3

MIRROR ASSEMBLY, Triplet (9200, 9400 - Black, 3mm)

1

 

Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.

© 3M IPC 2001

9

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 4.

Arm and Focus Assembly

© 3M IPC 2001

10

 

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 4.

 

 

 

 

Arm and Focus Assembly Parts List

 

 

 

 

 

 

 

 

 

Item

3M

 

Description

Qty.

 

No.

Part Number

 

 

 

 

 

0A

DY-0210-2704-9

FOCUS ARM UPGRADE KIT (Europe only)

1

 

 

0B

78-8054-1821-3

FOCUS ARM UPGRADE KIT (All versions except 9550)

1

 

 

 

 

(Includes items 1, 2, 3A, 4, 5, 6, 7, 9, 13, 14, 15, and 16)

 

 

 

 

 

 

 

 

 

0C

78-8073-2951-7

FOCUS ARM UPGRADE KIT (9550) (Includes items 1, 2, 9,

1

 

 

 

 

17, 18, 22, and Focus Arm 78-8120-2942-5)

 

 

 

 

 

 

 

 

 

1

(See Note 1)

SCREW, Plastite, 6-19 X 1/2, BZN

4

 

 

2

78-8120-2930-0

CAP, Focus Arm

 

1

 

 

3A

78-8079-8745-4

GEAR, Focus

 

1

 

 

3B

26-1009-4445-8

LUBRICANT (All versions)

AR

 

4

(See Note 1)

SCREW, Shoulder

 

2

 

 

5

26-1009-4515-8

SPRING, Compression

2

 

 

6

78-8079-8747-0

BAR, Pressure

 

1

 

 

7

78-8079-8743-9

CLAMP, Friction

 

1

 

 

8

78-8079-8744-7

RACK, Focus

 

1

 

 

9

(See Note 1)

SCREW, Plastite, Sems, 8-11 X 5/8

2

 

 

10

(See Note 1)

SCREW, Plastite, Sems, Hex Washer

2

 

 

11

78-8079-8798-3

PLATE, Washer

 

1

 

 

12

26-1009-3653-8

CAP, Post (22mm square)

1

 

 

13

78-8120-2929-2

ARM, Focus, Plastic

 

1

 

 

14

78-8120-2920-1

PLATE, Standoff

 

1

 

 

15

78-8120-2925-0

PAD, Wear

 

2

 

 

16

78-8064-1601-8

KNOB, Focus

 

1

 

 

17

(See Note 1)

SCREW, Plastite, 8-16 X 3/8, BZN

2

 

 

18

78-8120-2933-4

CLAMP, Fixed Arm (9550)

1

 

 

19

JV-0890-0183-6

LABEL, Caution, Japan

1

 

 

 

 

(9050 ABAJ, 9080 ABDJ, 9200 ABCJ, 9550 ABHJ)

 

 

 

 

 

 

 

 

 

20A

78-8079-8759-5

POST, Fixed (9050, 9060, 9070, 9075, 9400)

1

 

 

20B

78-8079-9088-8

POST, Folding, Long

(9080, 9100, 9200)

1

 

 

20C

78-8079-9089-6

POST, Folding, Long

(9550)

1

 

 

21

78-8054-1713-2

LABEL, Post, Japan (9050 ABAJ, 9080 ABDJ, 9550 ABHJ)

1

 

Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.

© 3M IPC 2001

11

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 5.

Top Cover

© 3M IPC 2001

12

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 5.

 

 

 

 

 

Top Cover Parts List

 

 

 

 

 

 

 

 

 

Item

3M

 

Description

Qty.

 

No.

Part Number

 

 

 

 

1

(See Note 1)

SCREW, Plastite, 6-19 X 5/16

6

 

 

2A

78-8120-2943-3

BRACKET, Hinge, Fresnel Lens, Dual Element

1

 

 

 

 

(9075, 9085, 9100/FNT, 9200/FNT, 9400, 9550)

 

 

 

2B

78-8120-2941-7

BRACKET, Hinge Fresnel Lens, Single Element

1

 

 

 

 

(9050, 9060, 9070, 9080, 9100/ENX, 9200/ENX)

 

 

3

78-8073-2955-8

DOOR, Lamp Changer (9080, 9100, 9200)

1

 

 

4A

78-8073-2956-6

DOOR, Lamp Changer (9550)

1

 

 

4B

78-8095-8398-8

DOOR, Lamp Changer (9400)

1

 

5

78-8079-9022-7

LABEL, Lamp Indicator

(9550)

1

 

 

6A

78-8064-1473-2

GLASS, Stage (9050, 9060, 9070, 9075, 9080, 9100, 9200,

1

 

 

 

 

9400, 9550 Europe),

 

 

 

 

6B

78-8079-8975-7

GLASS, Stage (9550)

 

1

 

 

7A

78-8054-1835-3

TOP COVER, 10.5″ (267mm) (without lamp changer door)

1

 

 

 

 

(9050, 9060, 9070, 9075, 9080, 9085)

 

 

 

7B

78-8054-1837-9

TOP COVER, 10.5″ (267mm) (with lamp changer door)

1

 

 

 

 

(9080, 9100, 9200 AACM, BGC)

 

 

 

7C

78-8054-1839-5

TOP COVER, A4 (9050)

1

 

 

7D

78-8054-1838-7

TOP COVER, A4 (9080, 9085, 9100, 9200)

1

 

 

7E

78-8054-1842-9

TOP COVER, A4

 

1

 

 

 

 

(All 9550 except AAHD, AAHT, and AHHM, AJH)

 

 

 

7F

78-8054-1840-3

TOP COVER, A4 (9550 AAHD, AAHT and AHHM, AJH)

1

 

 

7G

78-8073-3108-3

TOP COVER, A4 (9080 Indonesia)

1

 

 

7H

78-8073-3106-7

TOP COVER, A4 (9100 Indonesia)

1

 

 

7I

78-8073-3107-5

TOP COVER, A4 (9200 Indonesia)

1

 

 

7J

78-8054-1842-9

TOP COVER, A4 (9400 Korea and Europe)

1

 

 

7K

78-8079-9178-7

TOP COVER, A4, Kit (9550 outside U.S.)

1

 

 

8A

78-8064-1645-5

FRESNEL LENS, Single Element, Glare Free, 182.9mm

1

 

 

 

 

(9050, 9060, 9070, 9080, 9100 AABD, AJB, AJBW, AJBX,

 

 

 

 

 

9200 AACD, AKC, AMD) (Europe)

 

 

 

8B

78-8095-8353-3

FRESNEL LENS, Dual Element, Clear, 182.5mm

1

 

 

 

 

(9075 AJG only)

 

 

 

 

 

 

 

 

 

 

8C

78-8054-1236-4

FRESNEL LENS, Dual Element, Glare Free, 182.5mm

1

 

 

 

 

(9100 except AABD, AJB, AJBW and AJBX, 9200 except

 

 

 

 

 

AACD and AJC) (Europe)

 

 

© 3M IPC 2001

13

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 5.

 

 

 

 

 

Top Cover Parts List

 

 

 

 

 

 

 

 

 

Item

3M

 

Description

Qty.

 

No.

Part Number

 

 

 

 

 

8D

78-8079-9045-8

FRESNEL LENS, Dual Element, Clear, 174mm

1

 

 

 

 

(9550 U.S. except ABHJ)

 

 

 

 

 

 

 

 

 

8E

78-8079-9176-1

FRESNEL LENS, Dual Element, Glare Free, 174mm

1

 

 

 

 

(9550 ABHJ Europe)

 

 

 

 

 

 

 

 

 

 

9A

78-8079-8828-8

RETAINER, Fresnel Lens, Single Element

1

 

 

9B

78-8079-8830-4

RETAINER, Fresnel Lens, Dual Element

1

 

10

78-8079-8939-3

LABEL, Caution (Lens)

 

1

 

11

78-8005-0481-9

SPRING

 

 

 

12

78-8079-8768-6

LATCH, Top Cover

 

1

 

 

13A

78-8079-8748-8

BUTTON, Power Switch, RED (All versions except 9550)

1

 

 

13B

78-8079-8974-0

BUTTON, Power Switch, PLUM (9550 except AHHK)

1

 

 

13C

78-8079-9165-4

BUTTON, Power Switch, Korea (9550 AHHK)

1

 

14

78-8064-1515-0

ACTUATOR, Switch Button

1

 

15

78-8079-8924-5

SHIELD, Heat, ENX Lamp

1

 

 

16A

78-8079-8918-7

SHIELD, Heat, FNT/EVD Lamp (all FNT and EVD versions

1

 

 

16B

78-8095-8339-2

SHIELD, Heat, EVD Lamp (9400, 9550 except AAHD, AAHT,

1

 

17

78-8073-2965-7

BRACKET, Airflow (9400, 9550)

1

 

18

(See Note 1)

SCREW, Plastite, 6-19 X 3/8

2

 

19

JV-0890-0183-6

LABEL, Caution, Japan

(9050, 9080, 9200, 9550)

1

 

Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.

© 3M IPC 2001

14

Xerox 9050, 9200, 9040, 9060, 9100 User Manual

3M™ Overhead Projector 9000 Series

Illustrated Parts Breakdown

 

 

 

Section 6.

Base Enclosure

© 3M IPC 2001

15

Loading...
+ 44 hidden pages