Wolfgang Puck BIBC1010 User Manual

0 (0)
Wolfgang Puck BIBC1010 User Manual

I M P O R T A N T N O T I C E

PLEASE DO NOT RETURN TO STORE. If you have any problems with this unit, contact Consumer Relations for service PHONE: 1-800-275-8273.

Please read operating instructions before using this product.

Please keep original box and packing materials in the event that service is required.

W.P. APPLIANCES, INC.

Toll Free (800) 275-8273 Email address: wpappliances@ss2000.com Website: www.wolfgangpuck-kitchenware.com

Model BIBC1010 Printed in China REV 2.1

W O L F G A N G PUCK

Immersion

Blender/

Chopper

Manual

All trademarks, service marks and trade names (collectively the “Marks”) are proprietary to Wolfgang Puck World Wide.

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed, including the following:

1Read all instructions carefully.

2To protect against risk of electrical shock, do not put motor base, cord or plug of the appliance in water or other liquid.

3Close supervision is necessary when any appliance is used by or near children.

4Turn unit off and unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. To disconnect, turn unit off, grasp plug, and pull from the wall. Never yank on cord.

5Avoid contact with moving parts. Keep hands, hair, clothing as well as utensils, away from the cutting blade during operation to prevent injury and/or damage to the chopper. A spatula may be used but only when the unit is not running.

6Blades are sharp; handle carefully.

7Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return the appliance to an authorized service facility for examination, repair, or electrical or mechanical adjustment.

8The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury.

9Do not use outdoors.

10Do not let cord hang over edge of table or counter or touch hot surfaces, including the stove.

11Mixing flammable non-food substances can be harmful.

12When mixing liquids, especially hot liquids, use a tall container, or make small quantities at a time to reduce spillage.

13Do not use this appliance for other than intended use.

14Do not operate in the presence of explosive and/or flammable fumes.

15This appliance is intended for HOUSEHOLD USE ONLY.

Save These Instructions

This appliance has a polarized plug (one blade is wider than the other).

As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Before Your First Use

Carefully unpack the blender and accessories, and remove all packaging materials. Wash the chopper bowl, chopping blade, blade attachments, and hand blender attachment in warm, soapy water to remove any dust that may have accumulated during packaging. Do not immerse the bowl cover, motor base, cord or plug in water. Wipe the motor base and bowl cover with a damp cloth.

CAUTION: The attachment blades are very sharp. Use care when handling.

1

2

Wolfgang Puck,

owner of the famous Spago restaurants and one of the most influential chefrestauranteurs in America, is credited with reviving California’s rich culinary heritage. His cooking innovations, a result of blending fresh California

ingredients with his classical French techniques, are enjoyed by world leaders, stars and fellow chefs alike. He established other trend-setting restaurants like Postrio in San Francisco, Chinois on Main in Santa Monica, Granita, Vert and Trattoria del Lupo. Home chefs can also share Mr. Puck’s talents through his cookbooks and, of course, through his appliances!

Table of Contents

Important Safeguards

1

 

 

 

 

Before Your First Use

2

 

 

 

 

About Wolfgang Puck

3

 

 

 

 

Know Your Immersion Blender

5

 

 

 

 

Hand Blender Attachment

7

 

 

 

 

Attachment Blades

8

 

 

 

 

Food Chopper Attachment

9

 

 

 

 

Helpful Hints

10

 

 

 

 

Care and Cleaning

11

 

 

 

 

Recipes

12

 

 

 

 

Recipe Notes

24

 

 

 

 

Limited Warranty

26

 

 

 

 

Contact Information

27

 

 

 

 

3

Know Your

 

Immersion Blender

Immersion Blender/Chopper

 

with Storage Kit

•Stand

•Speed Selector

•Mixing Beaker

•Blending rod

•Motor Base

 

•Aerator disc

 

•Blending disc

 

•Bowl cover

•Grinding blade

•Attachment removal tool

 

 

•Chopper bowl

Chopping blade

•Multipurpose “S” blade

 

(for chopping bowl only)

 

5

6

Assembly and Use

of Hand Blender Attachment

 

1

Ensure the motor base is unplugged. Attach

 

 

hand blender rod to motor base by lining up

 

 

the two separate parts. Turn clockwise to lock

 

 

in place. (see figure 1)

 

2

Place one of the small metal attachments in the

 

 

shaft of the mixing rod. Make sure that the pin

 

 

located on the shaft fits into the slot of the

 

 

attachment. Press down until attachment locks

figure 1

 

in place.

 

Caution: Blades are sharp. Handle with care.

 

 

 

 

 

Place food in suitable container for mixing

 

3

 

 

(beaker, bowl, pan). For best results, solid foods

 

 

should be no larger than 1/4" or 1/2" cubes.

 

4

Plug into 120-volt 60 Hz AC only outlet.

 

5

Place the hand blender attachment into your

 

 

ingredients. Turn the speed selector to LO first.

 

 

Press the ON/OFF switch to begin blending; then

figure 2

 

gradually increase speed, as needed. (see figure

 

2) Slowly move the blade up, down and sideways

 

 

 

 

 

 

through the food . Note: Never lift the hand

 

 

 

 

blender attachment out of your ingredients while

 

 

the unit is running.

 

6

Do not operate the motor continuously for more

 

 

than one minute when using hand blender

 

 

attachment. Allow it to cool off for 3 minutes

 

 

before next use.

 

7

When you are finished, simply release the

figure 3

 

ON/OFF switch, unplug the motor base, and

 

then unscrew the hand blender rod.

8

To remove blades from the blender rod, use your

 

 

blade removal tool as shown in figure 3. Slide

 

 

the opening of the tool underneath the blade

 

 

and press down.

Using the Attachment Blades

To change the metal attachment blade, remove the attachment already inserted on the shaft of the mixing rod with the tool provided. Use the side of the tool with the semi-circular slot to remove the attachment. Place the slot around the shaft, underneath the attachment, and lift up to remove.

Caution: Blades are sharp. Handle with care.

Suggested Uses

To change the metal attachment blade, remove the attachment already inserted on the shaft of the mixing rod with the tool provided. Use the side of the tool with the semi-circular slot to remove the attachment. Place the slot around the shaft, underneath the attachment, and lift up to remove.

Caution: Blades are sharp. Handle with care.

Attachment

Functions

Speed

Aerator disc

Beat cream, whip egg whites,

Minimum

 

puddings, sauces, frostings and other

 

 

airy, foamy mixtures. When using, move

 

 

blending rod up and down to draw air

 

 

in. Use a tall, narrow container for best

 

 

results when foaming milk, making

 

 

cream and whipping egg whites.

 

Blending disc

Grinding blade

Mix and stir shakes, drinks, omelet batters, sauces and emulsions. Use for pancake batter, gravies and dressings.

Cut, chop, and crush raw or cooked meat and hard vege-tables.Grind cooked meat for use in recipes such as casseroles or chicken salad.

Medium to Maximum

Maximum

Multipurpose blade

Chop, crush, and mash vege-tables, and

Medium to

 

fruit for baby food, soups and sauces.

Maximum

 

Use to crush ice (add water to cubes

 

 

before crushing.)

 

7

8

Loading...
+ 9 hidden pages