Windsor SPDS20, SP20X, SP17X, SP15, SP17 User Manual

...
4.5 (2)
Windsor SPDS20, SP20X, SP17X, SP15, SP17 User Manual

Operating Instructions (ENG)

FLOOR POLISHER

MODELS: SP13

SP17X

SP15

SP20X

SP17

SPDS20

SP20

 

Read these instructions before using the machine.

F

980100 04/24/06

MACHINE DATA LOG/OVERVIEW

MODEL______________________________

DATE OF PURCHASE ________________

SERIAL NUMBER____________________

YOUR DEALER

Name: __________________________________________________________________________________________________

Address: _______________________________________________________________________________________________

For the name and address of your dealer contact: Windsor Industries

Phone Number: _________________________________________________________________________________________

STORM POLISHER 980100 03/08/03

2

TABLE OF CONTENTS

Machine Data Log/Overview.

.........................2

Table of Contents ...........................................

3

HOW TO USE THIS MANUAL

How to use this Manual..................................

4

SAFETY

Important Safety Instructions

.........................1-1

Hazard Intensity Level. ..................................

1-2

Grounding Instructions...................................

1-3

OPERATION / MAINTENANCE

Technical Specifications ................................

2-1

Handle Installation..........................................

2-2

Operation........................................................

2-3

Pad Driver Installation....................................

2-4

Maintenance...................................................

2-5

Service Schedule. ..........................................

2-5

Machine Troubleshooting...............................

2-6

GROUP PARTS LIST

Brush/Pad Driver Group

................................3-1

Frame Group..................................................

3-3

Motor Group...................................................

3-5

Handle Group.................................................

3-7

Wiring Group..................................................

3-9

Wiring Diagram ............................................

3-11

Suggested Spare Parts................................

3-11

Warranty ......................................................

3-12

STORM POLISHER 980100 03/08/03

3

 

HOW TO USE THIS MANUAL

This manual contains the following sections:

-HOW TO USE THIS MANUAL

-SAFETY

-OPERATIONS

-MAINTENANCE

-PARTS LIST

The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.

Parts may be ordered from authorized Windsor dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual.

MODEL _____________________________________

DATE OF PURCHASE ________________________

SERIAL NUMBER ____________________________

SALES REPRESENTATIVE # ___________________

DEALER NAME ______________________________

OPERATIONS GUIDE NUMBER __________________

PUBLISHED ________________________________

The SAFETY section contains important information regarding hazard or unsafe practices of the machine. Levels of hazards is identified that could result in product or personal injury, or severe injury resulting in death.

The OPERATIONS section is to familiarize the operator with the operation and function of the machine.

The MAINTENANCE section contains preventive maintenance to keep the machine and its components in good working condition.

The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information:

-REF – column refers to the reference number on the parts illustration.

-PART NO. – column lists the part number for the part.

-QTY – column lists the quantity of the part used in that area of the machine.

-DESCRIPTION – column is a brief description of the part.

-SERIAL NO. FROM – column indicates the first machine the part number is applicable to. When the machine design has changed, this column will indicate serial number of applicable machine. The main illustration shows the most current design of the machine. The boxed illustrations show older designs.

-NOTES – column for information not noted by the other columns.

NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts.

NOTE: The 98# on the lower left corner of the front cover is the part number for this manual.

STORM POLISHER 980100 03/08/03

4

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

! WARNING: To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain.

Use only as described in this manual. Use only manufacturer’s recommended components and attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

During operation, attention shall be paid to other persons, especially children.

The machine shall only be operated by instructed and authorized persons.

When leaving unattended, unplug the machine.

Do not handle the plug or machine with wet hands.

Do not unplug machine by pulling on cord. To unplug, grasp the plug, not the cord.

Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the machine.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.

Do not pull/run machine over cord. Keep cord away from heated surfaces.

Connect to a properly grounded outlet. See Grounding Instructions.

SAVE THESE INSTRUCTIONS

STORM POLISHER 980100 03/08/03

1-1

 

HAZARD INTENSITY LEVEL

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions:

! WARNING

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

!

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating condition. Following is information that signals some potentially dangerous conditions to the operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use Windsor approved replacement parts.

1-2

STORM POLISHER 980100 03/08/03

 

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

ELECTRICAL:

In the USA this machine operates on a one 15 amp nominal 120V, 60 hz, A.C. power circuit. The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment­ grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug in “Fig. A”. A temporary adaptor that looks like the adaptor in “Fig . C” may be used to connect this plug to a 2-pole receptacle as shown in “Fig. B”, if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet (Fig. A) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by a metal screw.

GROUNDING INSTRUCTIONS

! WARNING:

Improper connection of the equipment­ grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

STORM POLISHER 980100 03/08/03

1-3

TECHNICAL SPECIFICATIONS

ITEM

DIMENSION/CAPACITY

Construction

Heavy-duty die cast aluminum deck

 

with heavy-duty rubber bumper,

 

tubular steel adjustable handle with

Motor

die cast aluminum handle housing

 

SP13, SP15, SP17, SP20

1.0 hp

SP17X, SP20X, SPDS20

1.5 hp

Brush/Pad speed

 

SP13, SP15, SP17, SP20, SP17X, SP20X

175 rpm

SPDS20

175/300 rpm

Electrical system

115 volts, 60 Hz

Cable

50’ (15 m), 14/3, built in cord wrap

Switches

Dual levers with safety lock

Wheels

Two 5” (12.7 cm) dia., 1.25” (3 cm)

 

wide, non-marking tread

Handle

1.5” (4 cm) tubular steel,

 

adjustable, easy to use thumb

 

activated safety lock

Dimensions (L x W x H)

 

13” (33 cm) model

21.0” (53 cm) x 14” (36 cm) x 47”

 

(119 cm)

15” (38 cm) model

22.0” (56 cm) x 16” (41 cm) x 47”

 

(119 cm)

17” (43 cm) model

23.0” (58 cm) x 18” (46 cm) x 47”

 

(119 cm)

20” (51 cm) model

24.5” (62 cm) x 21” (53 cm) x 47”

 

(119 cm)

2-1

STORM POLISHER 980100 03/08/03

 

Loading...
+ 16 hidden pages