Windsor UDS20-10090630, SP15-10090230, U20-10090600, SP20X-10090320, SP13-10090220 User Manual

...
0 (0)

FLOOR POLISHER

MODELS:

 

 

 

U17-10090580

SP13-10090220

SPT17-10090370

SP17IE-10090270

U20-10090600

SP15-10090230

SPT20X-10090380

SP17IA-10090260

U17X-10090590

SP17-10090240

 

SP17XIE-10090300

U20X-10090610

SP20-10090310

 

SP17XIA-10090290

UDS20-10090630

SP17X-10090280

 

SPDS17IE-10090340

 

SP20X-10090320

 

SPDS17IA-10090330

 

SPDS20-10090350

 

SP17HDIE-10090250

IPX4

Operating Instructions (ENG)

86309580-A 10/08/08

MACHINE DATA LOG/OVERVIEW

Model:

Date of Purchase:

Serial Number:

Sales Representative:

Address:

Phone Number:

2

86309580 FLOOR POLISHER 10/08/08

TABLE OF CONTENTS

Machine Data Log.............................

2

Table of Contents..............................

3

HOW TO USE THIS MANUAL

 

How to use this Manual.....................

1-1

SAFETY

 

Important Safety Instructions ............

2-1

Hazard Intensity Level. .....................

2-2

Grounding Instructions 120V. ...........

2-3

Grounding Instructions 230V ............

2-4

Safety Label Location .......................

2-5

OPERATION

 

Technical Specifications ...................

3-1

Handle Installation ............................

3-2

Controls.............................................

3-3

Handle Adjustment............................

3-3

Machine Operation............................

3-4

Pad Driver Installation.......................

3-4

MAINTENANCE

 

Scrub Brush/Pads .............................

4-1

Machine Troubleshooting..................

4-2

GROUP PARTS LIST

 

Brush/Pad Driver Group....................

5-1

Electrical – 120v................................

5-3

Electrical – 230v................................

5-5

Deck..................................................

5-7

Handle...............................................

5-9

Motor.................................................

5-11

Wiring-120V ......................................

5-13

Wiring-230V ......................................

5-15

Suggested Spare Parts.....................

5-14

86309580 FLOOR POLISHER 10/08/08

3

HOW TO USE THIS MANUAL

This manual contains the following sections:

-HOW TO USE THIS MANUAL

-SAFETY

-OPERATIONS

-MAINTENANCE

-PARTS LIST

The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.

Parts may be ordered from authorized dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual.

The SAFETY section contains important information regarding hazard or unsafe practices of the machine. Levels of hazards are identified that could result in product or personal injury, or severe injury resulting in death.

The OPERATIONS section is to familiarize the operator with the operation and function of the machine.

The MAINTENANCE section contains preventive maintenance to keep the machine and its components in good working condition. They are listed in this general order:

The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information:

-REF – column refers to the reference number on the parts illustration.

-PART NO. – column lists the part number for the part.

-PRV NO. - Reference No.

-QTY – column lists the quantity of the part used in that area of the machine.

-DESCRIPTION – column is a brief description of the part.

-SERIAL NO. FROM – If this column has an (*) and a Reference number, see the SERIAL NUMBERS page in the back of your manual. If column has two asterisk (**), call manufacturer for serial number. The serial number indicates the first machine the part number is applicable to. The main illustration shows the most current design of the machine. When a boxed illustration is shown, it displays the older design.

-NOTES – column for information not noted by the other columns.

NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts.

NOTE: The number on the lower left corner of the front cover is the part number for this manual.

1-1

86309580 FLOOR POLISHER 10/08/08

SAFETY

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain.

Use only as described in this manual. Use only manufacturer’s recommended components and attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

During operation, attention shall be paid to other persons, especially children.

The machine shall only be operated by instructed and authorized persons.

When leaving unattended, unplug the machine.

Do not handle the plug or machine with wet hands.

Do not unplug machine by pulling on cord. To unplug, grasp the plug, not the cord.

Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the machine.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.

Do not pull/run machine over cord. Keep cord away from heated surfaces.

Connect to a properly grounded outlet. See Grounding Instructions.

SAVE THESE INSTRUCTIONS

86309580 FLOOR POLISHER 10/08/08

2-1

SAFETY

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words – WARNING and CAUTION and FOR SAFTEY. The level of hazard intensity is determined by the following definitions:

WARNING – Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION – Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating condition. Following is information that signals some potentially dangerous conditions to the operator or equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the devices on the machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and Understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose fitting clothing, jackets, shirts, or sleeves when working on the machine. Use approved replacement parts.

2-2

86309580 FLOOR POLISHER 10/08/08

GROUNDING INSTUCTIONS-120V

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

ELECTRICAL:

In the USA this machine operates on a one 15 amp nominal 120V, 60 hz, A.C. power circuit. The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipmentgrounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug in “Fig. A”. A temporary adaptor that looks like the adaptor in “Fig . C” may be used to connect this plug to a 2-pole receptacle as shown in “Fig. B”, if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet (Fig. A) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by a metal screw.

SAFETY

Grounding Pin

GROUNDING CONNECTION

USING AN ADAPTOR

Grounded

Outlet

FIGURE A

Metal Screw

Tab for Grounding

Adaptor

 

Grounded

FIGURE B

Screw

Outlet Box

 

Adaptor

FIGURE C

Note: Adaptors are not allowed in Canada.

Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

86309580 FLOOR POLISHER 10/08/08

2-3

SAFETY

GROUNDING INSTRUCTIONS-230V

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

ELECTRICAL:

The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.

EXTENSION CORDS:

If an extension cord is used, the wire size must be at least one size larger than the power cord on the machine, and must be limited to 50 feet (15.5m) in length.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

2-4

86309580 FLOOR POLISHER 10/08/08

Windsor UDS20-10090630, SP15-10090230, U20-10090600, SP20X-10090320, SP13-10090220 User Manual

SAFETY

SAFETY LABEL LOCATION

NOTE: These drawings indicate the location of safety labels on the Machine. If, at any time, the labels become illegible contact your authorized representative for prompt replacement.

WARNING LABEL

P/N 86219740

PRV NO. 500194

86309580 FLOOR POLISHER 10/08/08

2-5

TECHNICAL SPECIFICATIONS

ITEM

DIMENSION/CAPACITY/MODEL

 

Heavy-duty die cast aluminum deck with heavy-

CONSTRUCTION

duty rubber bumper, tubular steel adjustable

 

handle with die cast aluminum handle housing

MOTOR

 

1HP 115V induction

SP13, SP15, SP17, U17, SP17, SP20, U20

1.5HP 115V induction

SP17X, U17X, SPT20X, SP20X, U20X

1.75 HP 115V 175/300RPM

SPDS20, UDS20

1HP 230V induction

SP17IA, SP17IE

1.5 HP 230V induction

SP17HDIE, SP17XIA, SP17XIE

1.75 HP 230V 175/300RPM

SPDS17IA, SPDS17IE

BRUSH/PAD SPEED

 

175 rpm

SP13, SP15, SP17, U17, SP17, SP20, U20,

SP17X, U17X, SPT20X, SP20X, U20X

 

146 rpm 230V

SP17HDIE , SP17IA, SP17IE, SP17XIA,

SP17XIE

 

175/300 rpm

UDS20, SPDS20, SPDS17IA, SPDS17IE

ELECTRICAL SYSTEM

 

 

SP13, SP15,, SP17, U17,SPT17, SP17X, U17X,

115 volts, 60 Hz

SP20, U20, SPT20X, SP20X, U20X,

 

SPDS20, USD20

230 volts, 50Hz

SP17HDIE, SP17XIA, SPX17IE, SPDS17IE,

SP17IA, SP17XIA, SPDS17IA

 

CABLE

 

50’ (15 m), 14/3, built in cord wrap

SP13, SP15,, SP17, U17,SPT17, SP17X, U17X,

SP20, U20, SPT20X, SP20X, U20X,

 

SPDS20, USD20

75’ (22.9) 1.5mm³, built in cord wrap

SP17HDIE, SP17XIA, SPX17IE, SPDS17IE,

SP17IA, SP17XIA, SPDS17IA

 

SWITCHES

Dual levers with safety lock

WHEELS

Two 5” (12.7 cm) dia., 1.25” (3 cm) wide, non-

marking tread

 

HANDLE

1.5” (4 cm) tubular steel, adjustable, easy to use

thumb activated safety lock

 

DIMENSIONS (L X W X H)

 

 

 

13” (33 cm) model

21.0” (53 cm) x 14” (36 cm) x 47” (119 cm)

15” (38 cm) model

22.0” (56 cm) x 16” (41 cm) x 47” (119 cm)

17” (43 cm) model

23.0” (58 cm) x 18” (46 cm) x 47” (119 cm)

20” (51 cm) model

24.5” (62 cm) x 21” (53 cm) x 47” (119 cm)

3-1

86309580 FLOOR POLISHER 10/08/08

Loading...
+ 23 hidden pages